REMOTE SOLAR STRING LIGHTS
INSTRUCTIONS

PRODUCT SPECIFICATION

SOLAR PANEL	4.5V 250MA
BATTERY	1200 capacity
WORKTIME	3-5 nights if power is full
FUNCTION COLOR	brightness control, 8 modes adjust, timing
	❑ Cowhide ❑warm white ❑multi-color ❑ others
LED	❑30LED ❑50LED ❑6OLED ❑ 100LED ❑200LED
	❑300LED ❑500LED ❑1000LED ❑others
MODE	1.Combination 2.In waves 3.Sequential 4.Slo Glo 5.Chasing/Flash 6.Slow fade 7. Twinkle/Flash 8.Steady on

DIRECTION FOR USING

HOW TO USE REMOTE CONTROL

REMOTE CONTROL ATTENTIONS 

INSTALLED ON THE GROUND

1. Take out the bracket and connect it
2. Combine the bracket with the controller
3. Install the product according to the picture

INSTALLED ON THE WALL

1. Punch holes in the wall according to the positioning holes
2. Tighten the screw and fix the bracket
3. The best installation angle as the picture

 

ATTENTIONS

Charging during the day, please make sure nothing cover the solar panel Whether or not it will affect the charging effect of solar energy, and affect the lighting time and brightness.
Make sure there is no strong light on the solar panel after dark, Whether or not it will enter charging mode, and the string lights will not work.

Documents / Resources

Maleyt B09ZLHX1YF Remote Solar String Lights [pdf] Instructions B09ZLHX1YF Remote Solar String Lights, B09ZLHX1YF, Remote Solar String Lights, Solar String Lights, String Lights, Lights

References

• User Manual