Power Connection: Connect the product to a
power source within the specified voltage range.
Adjustment: Customize the detection area,
distance, and motion speed as per your requirements.

Testing: Test the PIR47 by moving within its
detection range to ensure proper functionality.
Maintenance: Regularly clean the sensor lens
to maintain optimal performance.

Frequently Asked Questions (FAQ)

Q: How do I adjust the time delay on the PIR47?

A: The time delay can be adjusted using the settings on the
PIR47 device. Refer to the user manual for detailed
instructions.

Q: Can the detection area of the PIR47 be customized?

A: Yes, the detection area of the PIR47 can be customized based
on your specific needs. Follow the instructions provided in the
manual for customization.

Q: What is the recommended mounting height for indoor
installation of the PIR47?

A: The recommended mounting height for indoor installation of
the PIR47 is typically between 6 to 8 feet above the ground for
optimal performance.

View Fullscreen

INSTRUCTION MANUAL
PIR47
360° PIR Presence Motion Sensor
Indoor Installation

1. INTRODUCTION The PIR47 automatically turns on lights or any electrical device within the sensors rated load, when motion and body heat is detected. It has a 360° PIR presence sensor with a detection area of 6m and a maximum height of 6m, as well as normal PIR motion detection up to 12m with adjustable settings for time and Lux level, easily integrating into new or existing installations. With an IP20 rating, the sensor is intended for indoor installations. Installation must be done by a qualified electrician.

2. SPECIFICATIONS
Function Voltage Power Frequency Ambient Light Time Delay Rated Load Detection Area Detection Distance Detection Motion Speed Installation Type

Range 220 – 240V AC 50/60 Hz <3 – 2000 Lux 10 sec (±3 sec) to 30 min (±2 min) 2000W Incandescent/ 1000W LED/CFL 360° 6m Presence, 20m Movement Presence Ceiling Mountable

Function Working Temperature Working Humidity Power Consumption Installation Height IP Protection Swivel Head Warranty Standards

Range -20~40°C <93% RH Approx. 0.5W 2.2 – 6m IP20 Indoor No 5 years IEC 60669-1, IEC 60669-2-1 AS/NZS 60669.1, AS/NZS 60669.2.1

3. FUNCTION a. Sensor Can identify between day and night (Lux Mode):
The consumer can adjust working state in different ambient light. It can work in the day time and at night when it is adjusted on the ” ” (sun) position (max). It can work in the ambient light less than 3 LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern. b. Time-Delay is added continually: When the sensor detects movement while the light is already on, the countdown timer resets. This means the light will remain On for the full set duration from the moment of the latest detection. c. Adjustable Time Delay: The sensor can be set according to the consumer’s desire (10s, 30s, 90s, 5min, 10min, 30min)

4. CONTROL SETTING INFORMATION ! Turn the TIME knob anticlockwise to the minimum (10s). Turn the LUX
knob clockwise to the maximum (Sun). ! Switch on the power; the sensor will require 30 seconds to warm up.
Once the sensor detects movement, the lamp will turn On. If no other movement is detected within the time duration set, the light will turn ! Off within the 10 seconds ±3 sec. ! Turn the LUX knob anticlockwise to the minimum (3). If the ambient light is more than 3 Lux, the sensor is not able to function. If the ambient light is less than 3 Lux (dark), the sensor will operate.

Note: When testing in daylight, please turn Lux knob to position, otherwise the sensor will not work!

(Sun)

5. SENSOR INFORMATION

6. PRESENCE & PIR SENSOR INFORMATION 1. When the detection distance is less than 3 meters, the sensor detects human presence with minimal movement and keeps the
connected load switched on without interruption, ensuring continuous illumination as long as presence is detected. 2. At a detection distance of 2.2 to 6 meters, the sensor operates as a conventional PIR motion sensor, this means it will detect
motion and this will control the connected load.

Note: PIR Presence Sensors, also known as PIR Occupancy Sensors, reply on line-of-sight and look for changes in heat in the detection area – if you have minimal movements or move slightly, the PIR sensor will pick up these changes and know you are there. These occupancy sensing methods help ensure that the lights or other electrical equipment systems only run when needed, saving energy without omitting you in the room.
7. INSTALLATION & WIRING OPTIONS ! Unscrew and remove fixing bracket from base of the sensor. ! Insert the power cable into the slot provided. ! Connect the power cable into the terminal block as per the wiring diagram. ! Identify the ideal field of view and use fixing bracket mounting holes to ensure
correct alignment for motion sensor. ! Drill holes and screw the fixing bracket to the marked location. ! Reconnect the sensor to the fixing bracket and fasten the screws. ! Once installation is complete, swivel the head to point in the intended
direction, secure it, and turn on the power to test.

Single Sensor Installation

WARNING: Danger of Death Through Electrical Shock
Y Must be installed by professional electrician.
Y Disconnect power source.
Y Cover or shied any adjacent live components.
Y Ensure device cannot be switched on.
Y Check power supply is disconnected.
8. INSTALLATION ADVICE ! Avoid pointing the detector towards objects with highly
reflective surfaces, such as mirrors etc. ! Avoid mounting the detector near heat sources, such as
heating vents, air conditioning units, light etc. ! Avoid pointing the detector towards objects that may move
in the wind, such as curtains, tall plants etc.

Multiple Sensor Installation

9. TROUBLESHOOTING

MAJOR TECH (PTY) LTD

South Africa

Australia

www.major-tech.com

www.majortech.com.au

sales@major-tech.com

info@majortech.com.au

Documents / Resources

Major Tech PIR47 360° PIR Presence Motion Sensor [pdf] Instruction Manual
PIR47, PIR47 360 PIR Presence Motion Sensor, PIR47, 360 PIR Presence Motion Sensor, Presence Motion Sensor, Motion Sensor, Sensor

References

User Manual

Major Tech PIR47 360° PIR Presence Motion Sensor Instruction Manual

PIR47 360° PIR Presence Motion Sensor

Product Information

Specifications

Product Usage Instructions