MAJOR TECH LFW Series Range LED Flood Light Instruction Manual

LFW Series Range LED Flood Light

Specifications

  • Function: LED Floodlight
  • Range: LFW
  • Models: LFW-10NWS, LFW-20NWS, LFW-30NWS,
    LFW-50NWS
  • LED Power: 10W, 20W, 30W, 50W
  • LED Lumen: 900Lm, 1800Lm, 2700Lm, 4500Lm
  • Dimensions: Vary based on model, see specifics
    below
  • Weight: Vary based on model, see specifics
    below
  • Installation Height: Varies based on
    model
  • LED Type: SMD 2835
  • Colour Temperature: 4000K – Natural White
  • Rated Life: 30,000 Hours
  • Voltage: 200 – 240V AC
  • Frequency: 50/60Hz
  • Power Factor: >0.9
  • CRI: >70
  • IP Rating: IP65
  • Cable Length: 30cm
  • Temperatures:
    • Working: N/A
    • Storage: N/A

Product Usage Instructions

1. Introduction

The IP65 LED floodlights offer high lumen outputs as efficient
replacements for traditional floodlights. They feature a 4mm
reinforced clear glass cover that is fully waterproof and resistant
to environmental factors. The die-cast aluminum body is
rust-resistant and designed for optimal heat dissipation, ensuring
a longer lifespan and better thermal performance.

2. Installation

If any damage is noticed upon removing the product from the
packaging, please return it to Major Tech before attempting
installation. These lights must be installed by a qualified
electrician.

2.1 Installation Steps

  1. Disconnect the power supply before installation.
  2. Remove the bracket from the floodlight for ease of
    installation.
  3. Drill 2 holes, place the bracket over the holes and screw into
    the wall.
  4. Reconnect the floodlight to the bracket using the same
    connections as provided when the light is removed from the
    packaging.
  5. Connect the brown and blue wires respectively to the mains
    ‘Live’ and ‘Neutral’, and connect the yellow and green wire to
    earth.
  6. Confirm connection once installed.

Frequently Asked Questions (FAQ)

Q: What is the IP rating of the LED floodlights?

A: The LED floodlights have an IP65 rating, making them
dust-tight and protected against water jets from any direction.

Q: What is the expected lifespan of the LEDs?

A: The LEDs have a rated life of 30,000 hours, providing
long-lasting illumination.

INSTRUCTION MANUAL LFW RANGE LED FLOODLIGHT

1. INTRODUCTION These IP65 LED floodlight provide high lumen outputs, offering an efficient replacement for traditional floodlights. It features a 4mm reinforced clear glass cover that is fully waterproof and resistant to environmental factors. The durable die-cast aluminum body is rust-resistant and designed for optimal heat dissipation, ensuring longer lifespan and better thermal performance.
Powered by high-performance SMD 2835 LEDs, the LFW range delivers natural, pure light for improved visibility. Ideal for outdoor use, these floodlights are easy to adjust, and environmentally friendly. The 360° bracket rotation feature simplifies installation, enables the floodlight to be directed in any direction, and eliminates the restriction of wall mounting. It also comes with a 30cm cable for simple installation.

2. INSTALLATION

If any damage is noticed upon removing the

product from the packaging, please return it to

Major Tech before attempting installation. These

lights must be installed by a qualified electrician.

If the light is incorrectly installed by an

unqualified individual, Major Tech reserves the

Fig. 1

right to refuse the return of the product.

2.1. Installation Steps

1. Disconnect the power supply before

installation.

2. Remove the bracket from the floodlight for ease of installation.

Fig. 2

3. Drill 2 holes, place the bracket over the holes

and screw into the wall (fig. 1 & 2). Please

ensure Installation height is 3 – 5 Meters.

4. Reconnect the floodlight to the bracket using

the same connections as provided when the

light is removed from the packaging (fig. 3).

5. Connect the brown and blue wires respectively to the mains ‘Live’ and `Neutral’,

Fig. 3

and connect the yellow and green wire to

earth (fig. 4). 6. Confirm connection once installed.

Fig. 4

2

3. SPECIFICATIONS

Function

Range

Model

LFW-10NWS LFW-20NWS LFW-30NWS LFW-50NWS

LED Power 10W

20W

30W

50W

LED Lumen 900Lm

1800Lm

2700Lm

4500Lm

Dimensions 150x148x26mm 223x212x36mm 223x212x36mm 295x270x48mm

Weight

380g

1Kg

1.1Kg

1.96Kg

Installation Height

3 to 5m

5 to 8m

LED Type

SMD 2835

Colour

Temperature 4000K – Natural White

Rated Life

30 000 Hours

Voltage

200 – 240V AC

Frequency

50/60Hz

Power Factor >0.9

CRI

>70

Beam Angle 120°

IP Rating

IP65

Cable Length 30cm

Temperatures

Working

-20°C to 45°C

Storage

-20°C to 45°C

4. MAINTENANCE · Make sure the power is off before doing any maintenance work. · Clean glass regularly to keep the light output at its best. · Use a dry cloth to wipe down housing and keep clean.

3

MAJOR TECH (PTY) LTD

South Africa

Australia

www.major-tech.com

www.majortech.com.au

sales@major-tech.com

info@majortech.com.au

Documents / Resources

MAJOR TECH LFW Series Range LED Flood Light [pdf] Instruction Manual
LFW-10NWS, LFW-20NWS, LFW-30NWS, LFW-50NWS, LFW Series Range LED Flood Light, LFW Series, Range LED Flood Light, LED Flood Light, Flood Light, Light

References

Leave a comment

Your email address will not be published. Required fields are marked *