Magichome-logo

Magichome 3L-UK Shower Head

Magichome-3L-UK-Shower-Head-product

FUNCTION INTRODUCTION

Magichome-3L-UK-Shower-Head-fig- (1)

  • Magichome-3L-UK-Shower-Head-fig- (2)Massage Mode
  • Magichome-3L-UK-Shower-Head-fig- (3)Jetting Mode (Mixed Mode)
  • Magichome-3L-UK-Shower-Head-fig- (4)Rainfall Mode

HOW TO REPLACE THE IONIC FILTER BALL

  • Hold the handle and rotate it counterclockwiseMagichome-3L-UK-Shower-Head-fig- (5)
  • Remove the metal filter and fill it as shownMagichome-3L-UK-Shower-Head-fig- (6)
  • After the filling is completed, the installation is as shown in the figure.
    • Don’t miss the filter when installingMagichome-3L-UK-Shower-Head-fig- (7)
    • After filling the metal filter, the negative ion ball will be fixed so that it will not fall out
  • Hold the handle and rotate it clockwise to complete the replacement of the negative ion ballMagichome-3L-UK-Shower-Head-fig- (8)
  • Replace the third-grade filter box
    • The calcium sulfite balls point inwards and the cotton points outwards.Magichome-3L-UK-Shower-Head-fig- (9)
    • After the replacement, turn the shower head clockwise. Magichome-3L-UK-Shower-Head-fig- (10)

HOW TO REPLACE THE NOZZLE PANEL

Magichome-3L-UK-Shower-Head-fig- (11)

  • Hold the shower head with one hand and rotate the nozzle panel counterclockwise with the other hand
    Stainless Steel Nozzle Panel Magichome-3L-UK-Shower-Head-fig- (12)
  • Replace the stainless steel nozzle panel with a silicone panel
    • No need to add the sealing ring during installation.Magichome-3L-UK-Shower-Head-fig- (13)
  • Hold the shower head with one hand and rotate the nozzle panel clockwise with the other hand to complete the replacement of the panel

Internal Disassembly Diagram

Magichome-3L-UK-Shower-Head-fig- (14)

Not Removable Non-professionals are not allowed to disassemble privately.

How to Clean Stainless Steel Nozzle Panel

  1. Remove the shower and disassemble the Stainless Steel Nozzle Panel.
  2. Prepare a container and white vinegar, put the Stainless Steel Nozzle Panel in it, pour a little white vinegar, and soak for 3 hours.Magichome-3L-UK-Shower-Head-fig- (15)
  3. Take out the Stainless Steel Nozzle Panel and wipe it dry. The vinegar will likely have removed most of the surface limescale. Give it a good scrub with a clean sponge if there are still minor blemishes.
  4. If there are still stubborn stains, please use a used toothbrush on Stainless Steel Nozzle Panel to remove stubborn stains.Magichome-3L-UK-Shower-Head-fig- (16)
  5. Reattach your clean shower head, then run the shower for at least 30 seconds before using it.Magichome-3L-UK-Shower-Head-fig- (17)

Documents / Resources

Magichome 3L-UK Shower Head [pdf] Instructions
3L-UK Shower Head, 3L-UK, Shower Head, Head

References

Leave a comment

Your email address will not be published. Required fields are marked *