MACHENIKE GTX Mini PC Owner’s Manual

Hello, Machenike

*Please read the instructions before using the product and keep them for future reference.

Product Use Safety Warning

1. Keep the computer away from heat, electrical or magnetic fields to ensure effcient cooling.
2. Avoid liquid spills on the machine. Disconnect power immediately if this happens.
3. Maintain a clean, dust-free environment. Recommended operating conditions: temperature 10°C-30°C, humidity 35%-80% (RH), elevation: 0~2000 meters. Suitable for home and offce use.
4. Employ the original power supply to operate your computer under a 220V alternating current voltage, failing which could culminate in electric leaks, burning, explosions or even bodily harm.
5. Regularly backup important data during daily usage to avoid data loss. Machenike and its certified service organizations bear no responsibility for compensation for any losses incurred due to data loss during usage or maintenance. Machenike is only committed to the repair and inspection of the product and unconditionally does not offer any data recovery or backup within the standard service range.
6. If the computer use environment is deficient in lightning protection or lacks it completely, please switch off the computer during a thunderstorm, and disconnect the power cord, network cable, etc. connected to the computer.
7. Clean the machine casing with a soft cloth slightly dampened with a solution of a mild cleaning agent or dry. Do not utilize any type of abrasive pads, scrubbing powders, alcohol, or solvents, such items could potentially damage the computer’s finish.
8. Many components inside the computer are precision instruments. Maintain proper posture while moving the machine or parts to prevent damage. Do not move the computer while it is turned on, to avoid damaging the hard disk, optical drive, and other  equipment.
9. Do not place the computer and other external devices on unstable tables, chairs, or platforms to avoid serious injuries caused by the computer and external devices falling.

Warranty Period Table

*The articulation of warranty components shall be predicated on the actual constituent elements within the packaged product.

Warranty Exceptions

This warranty does not apply to the following conditions:

1. The whole product or parts already beyond the warranty period.
2. External equipment, the third-party products(or components) isn’t loaded, attached in Machenike factoryand additional products or parts loaded according to user requirements.
3. The failure or damage caused by failure to specification requirements, errors or improper use, storage, maintenance, or operation of the product (such as hot plug cable, hot plug non-USB external devices, etc.).
4. The failure or damage caused by non-product required working environment (such as high or low temperatures, too wet or dry, high altitude, abnormal physical stress, electromagnetic interference, power supply instability, electrostatic interference, zero voltage is too large, the input voltage unreasonable etc.).
5. Faults or damage caused by non-Machenike authorized institutions (staff) installation, maintenance, alteration, addition or removal.
6. Malfunction or damage caused by the use of non-factory provided parts.
7. Failure or damage due to the use of pirated software, or other lawful authority, or public offering of non-standard software.
8. A variety of failure due to forgotten passwords.
9. Malfunction or damage due to accidental factors or man-made reasons (including monitor viruses, faulty operation, the liquid into, scratches, handling, bump, improper mating, objects fallen into, rat plagues, pests, etc.).
10. Malfunction or damage due to force majeure, natural disasters (such as earthquakes, fire, lightning, etc.).
11. Normal and reasonable consumption or damage (such as: natural consumption wear and aging of shell, connector block ).
12. Faults and damage caused by quality problems of other machines (including components) does not come from Machenike.

Maintenance Services

The service mode of all Machenike Mini PC products is users send to Machenike’s autho rized service provider Twireless Inc’s service points for repairing.

Machenike’s Service System

if you need Machenike Mini PC service, you can follow the following contact information tocontact with Machenike’s Authorized Service Provider:
Thank you for choosing Machenike’s products and services!

Machenike Warranty Card

Customer name:………………
Phone No.:…………………….
Address:……………………….
Product Model:………………..
Warranty Contents:…………..
Serial No.:……………………….
Purchase date:………………….
Warranty date:………………….
Remarks:………………………….
Authorized Dealer Signature & Stamp
To fulfill Machenike’s service commitment and solve your concern after purchase, our authorized service provider might create customer information in our customer service system, if your warranty card or proof of purchase is missing, we can query the customer information database to guarantee your service request is well satisfied.

Compliance FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure com