Introduction
Thank you for purchasing the Mag 4000W wireless charger. This device is widely compatible with all Qi-enabled devices, including Samsung S7/S7 edge, S8/S8 edge, S9/S9 edge, S10/S10 edge, S20/S21, iPhone 8/8 Plus, iPhone X, iPhone XR, iPhone XS, iPhone XS MAX, iPhone 11, iPhone 11 Pro, iPhone 11 Pro MAX, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro MAX, iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro MAX. Please read this manual carefully before using this product for a better experience.
Product Structure
The power bank is designed with a clear front and back. The front features the wireless charging area, which incorporates magnets for secure alignment. The back is the main body of the device.
Included Accessories
- User manual × 1
- Wireless Power Bank × 1
- Type C Cable × 1
Specifications
- Capacity: 4000mAh
- Type C Input: 5V/2.1A, 9V/2A
- Type C Output: 5V/2A, 9V/2A, 12V/1.5A
- Wireless Output: 10W (Max)
- Simultaneous Output: 5V/3A
- Dimension: 3.91*2.46*0.5 inch (99.6*62.5*12.8 mm)
- Weight: 3.98oz (113g)
LED Indicators
Power Rate Indicator
- 1-2 LEDs: 1%-33% Power
- 2-3 LEDs: 34%-66% Power
- 3 LEDs Solid: 67%-100% Power (Fully Charged)
- 1st LED Flashing: Low Battery
- Red LED Flashing: Charging the Power Bank
Wireless Charging Status Indicator
- Red LED Stays On: Standby
- White LED Stays On: Working Properly
- Red LED Flashes: Over-voltage
- Red and White LED Flashes: Low voltage / FOD (Foreign Object Detection)
How to Use
Switch Operation
Single Press: Turn on the power bank.
Double Press: Turn off the power bank.
Tip: In standby mode, the device automatically shuts down after approximately 30 seconds if no operation is performed. Press the switch again to reactivate.
Charging the Power Bank
When the power bank is depleted or low on battery, connect it using a standard USB charging cable with a Type-C connector. Plug the USB-A end into a 5V/2A charging device (e.g., car charger, wall adapter).
Wireless Charging
Align the back of your compatible smartphone with the magnetic wireless charging area on the power bank. Charging will commence automatically, with a maximum output of 10W.
Wired Charging (Output)
- Insert the Type-C end of the charging cable into the 'Output' port on the power bank.
- Connect the other end of the cable to your mobile device.
- Press the switch button to begin charging your device.
Important Notes
Temperature: It is normal for the charger and your smartphone to become warm during operation. They may become hotter when charging and using simultaneously (e.g., playing music).
Wireless Charging: When using the wireless charging function, ensure no metal objects are placed on the back of the phone or between the phone and the charger. This includes items like credit cards or metal cases.
Troubleshooting Wireless Charging
- Clean any debris from the wireless charging surface of the power bank.
- If the power bank overheats, remove your mobile device and allow the power bank to cool down before attempting to charge again.
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Manufacturing and Compliance
Certifications: FCC, CE, RoHS compliant.
Manufacturing: Made in China.
Product Details (Chinese): 品名: Mag 4000W-中性说明书, 版本: 20211124, 规格: 100g 双胶纸 黑白正反印刷风琴折, 尺寸: 68x120 mm, 制作: 李志敏, 料号: [Not specified in OCR]