Instructions for RigExpert models including: Zero II Project Boards, Zero II, Project Boards, Boards

Anna Zyubriy

For upgrade of Zero II FirmWare you need 1. To setup the ...

28 дек. 2024 г. — For upgrade of Zero II FirmWare you need. 1. To setup the FlashTool SW for PC https://rigexpert.com/files/software/FlashTool/FlashToolForWindows/ for ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 65.73KB

For upgrade of Zero II FirmWare you need 1. To setup the FlashTool SW for PC https://rigexpert.com/files/software/FlashTool/FlashToolForWindows/ for Windows OS or https://rigexpert.com/files/software/FlashTool/FlashToolForMacOS/ for MacOS 2. To connect Zero II unit to the PC (microUSB ­ Type-A USB cable) 3. To run the FlashTool SW 4.In opened Dialog window to push "Next"  Choose "Update from Internet" 5. Push the "Next" 6. Wait the FW update will be done 7. Push "Finish" 8. Disconnect the Zero II from PC.



References