Instruction Manual
6 Person Tunnel Tent
(Keycode: 42898764)
Product Image
A visual representation of the 6 Person Tunnel Tent.
Parts List
| No. | Part name | Quantity | Image |
|---|---|---|---|
| 1 | Inner tent body | X1 | A depiction of the inner tent body. |
| 2 | Flysheet body | X1 | A depiction of the flysheet body. |
| 3 | Divider Curtain | X1 | A depiction of the divider curtain. |
| 4 | Fibreglass pole A | X1 (4.90M) | A depiction of a fibreglass pole labeled A. |
| 5 | Fibreglass pole B | X2 (4.45M) | A depiction of two fibreglass poles labeled B. |
| 6 | Guy rope | X6 | A depiction of guy ropes. |
| 7 | Pegs | X21 | A depiction of pegs. |
Upright annex poles are optional and not included. They can be purchased individually.
Please read all instructions carefully and ensure all parts are present before starting assembly.
Assembly Steps
-
Step 1
Take out the fibreglass poles from the bag. Assemble the poles by joining each section together with the ferrules.
Pole A (4.90M)
Pole B (4.45M)
-
Step 2
Spread out the inner tent body. Insert poles A and B through the pole sleeves on the tent body.
-
Step 3
Erect the tent by arching the poles and inserting the pole ends with pins into the rings at the bottom of each tent corner. Attach the hooks to each pole. Attach the divider curtain to the inner tent using the toggle and tie loop.
Divider Curtain
-
Step 4
Cover the inner tent with the flysheet body and secure the bottom corners using the buckles on the inner tent. Move the tent to your desired campsite location. Secure the pre-attached guy ropes and peg down the tent. The tent is now complete.
Upright annex poles (not included, sold separately in store)
Warning
- Keep all flame and heat sources away from this tent fabric.
- Do not use candles, matches, or open flames of any kind in or near the tent.
- Do not cook inside the tent.
- Do not smoke in the tent.
- Do not store flammable liquids inside the tent.
- Extinguish or turn off all lanterns before going to sleep.
- Choose a level site to erect the tent that is clear from overhanging branches and not in low-lying areas that could be subject to flooding.
Care Instructions
- Wipe clean with a damp cloth.
- Do not use abrasive materials and solvents.
- Ensure the tent is clean and dry before packing or storing to prevent damage from mould and mildew.
