User Guide for MSI models including: G Series LCD Monitor, G Series, LCD Monitor, Monitor
12 giu 2023 — Screen Size. Auto. ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate. ∙ Activating Screen Size 1:1 will affect:.
12 juin 2023 — Place the monitor on a soft, protected surface to avoid scratching the display panel. ∙ Do not use any sharp objects on the panel.
File Info : application/pdf, 27 Pages, 1.72MB
DocumentDocumentG Series
LCD Monitor
G274QPX (3CC2)
User Guide
Contents
Getting Started.............................................................................................................. 3 Package Contents................................................................................................... 3 Installing the Monitor Stand................................................................................... 4 Adjusting the Monitor ............................................................................................. 5 Monitor Overview.................................................................................................... 6 Connecting the Monitor to PC ................................................................................ 8
OSD Setup ..................................................................................................................... 9 Navi Key .................................................................................................................. 9 Hot Key.................................................................................................................... 9
OSD Menus.................................................................................................................. 10 Gaming.................................................................................................................. 10 Professional.......................................................................................................... 13 Image .................................................................................................................... 14 Input Source ......................................................................................................... 14 PIP/PBP ................................................................................................................ 15 Navi Key ................................................................................................................ 16 Setting................................................................................................................... 16
Specifications.............................................................................................................. 18 Preset Display Modes ................................................................................................ 20 Troubleshooting.......................................................................................................... 21 Safety Instructions...................................................................................................... 22 TÜV Rheinland Certification....................................................................................... 24 Regulatory Notices..................................................................................................... 25
Revision V1.0, 2023/02
2 Contents
Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
Package Contents
Monitor
G274QPX
Documentation
Quick Start Guide
Stand with Screw(s)
Accessories
Stand Base with Screw(s) External Power Supply
Power Cord
Cables
Premium High Speed HDMITM Cable (Optional) DisplayPort Cable (Optional)
Important
Contact your place of purchase or local distributor if any of the items is damaged or missing.
Package contents may vary by country.
The included power cord is exclusively for this monitor and should not be used with other products.
Getting Started 3
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove.
2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4. Make sure the stand assembly is properly installed before setting the monitor
upright.
2
1
3
Important
Place the monitor on a soft, protected surface to avoid scratching the display panel. Do not use any sharp objects on the panel. The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit. This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may affect the warranty!
4 Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment capabilities.
Important
Avoid touching the display panel when adjusting the monitor.
-5° 20°
130mm
45°
45°
90°
90°
Getting Started 5
Monitor Overview
1
2 3
45
6
6
7
8
6 Getting Started
1 Power LED
Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode.
2 Power Button & Navi Key
3 Cable Routing Hole
4 Power Jack
5 Headphone Jack
6 HDMITM Connector
Supports 2560x1440@144Hz as specified in HDMITM 2.0b.
7 DisplayPort
Supports 2560x1440@240Hz as specified in DisplayPort 1.4a.
8 USB Type-C Port
This port supports DisplayPort Alternate (DP Alt) Mode and up to 20V/3.25A (65W) power delivery.
USB Type-C power delivery 5V / 3A (15W) 9V / 3A (27W) 12V / 3A (36W) 15V / 3A (45W) 20V / 3.25A (65W)
Getting Started 7
Connecting the Monitor to PC
1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5. Plug the power cord into the electrical outlet. (Figure C) 6. Turn on the monitor. (Figure D) 7. Power on the computer and the monitor will auto detect the signal source.
D B
C A
8 Getting Started
OSD Setup
This chapter provides you with essential information on OSD Setup.
Important
All information is subject to change without prior notice.
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu.
Up/Down/Left/Right: selecting function menus and items adjusting function values entering into/exiting from function menus Press (OK): launching the On-Screen Display (OSD) entering submenus confirming a selection or setting
Hot Key
Users may enter into preset function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive.
Users may customize their own Hot Keys to enter into different function menus.
OSD Setup 9
OSD Menus
Important
The following settings will be grayed out when HDR signals are received:
Night Vision
Brightness
MPRT
Contrast
Low Blue Light
Color Temperature
HDCR
PIP/PBP
Gaming
1st Level Menu Game Mode
Night Vision
2nd/3rd Level Menu User FPS Racing RTS RPG OFF Normal Strong Strongest A.I.
Description Use Up or Down Button to select and
preview mode effects. Press the OK Button to confirm and
apply your mode type.
This function optimizes background brightness and is recommended for FPS games.
10 OSD Menus
1st Level Menu Response Time
MPRT
2nd/3rd Level Menu Normal Fast Fastest OFF
ON
Description
Setting to Fastest will reach the shortest response time and help improve blurred images when playing very fast games.
Activating MPRT will affect:
Affected Function
» Response Time » Brightness » Screen Size 1:1 » Adaptive-Sync » HDCR » PIP/PBP
Function Status Unable to select Set to Auto
Set to OFF
Refresh Rate Alarm Clock
MPRT is available when the refresh rate is over 85Hz.
Location
Left Top
Right Top
Left Bottom
Right Bottom
Location is adjustable in OSD Menu. Press the OK Button to confirm and apply your Refresh Rate Location.
This monitor follows and works at the Operating System's preset Screen Refresh Rate.
Customize
OFF
ON
Location
Left Top
Right Top
Left Bottom
Right Bottom
After setting the time, press the OK Button to activate the timer.
Users have to manually restore their preset Alarm Clock after any AC power loss and reconnection.
Customize
OFF
15:00 30:00
00:01 ~ 99:59
45:00
60:00
OSD Menus 11
1st Level Menu
Screen Assistance
2nd/3rd Level Menu None Icon
Description
Users can adjust Screen Assistance in any mode.
Adaptive-Sync
Position Reset OFF ON
Adaptive-Sync prevents screen tearing.
Activating Adaptive-Sync will affect:
Affected Function » MPRT » PIP/PBP » Screen Size 1:1
Function Status Set to OFF Set to Auto
12 OSD Menus
Professional
1st Level Menu Pro Mode
Low Blue Light HDCR MPRT
2nd Level Menu User Anti-Blue Movie Office sRGB Eco
Description
Use Up or Down Button to select and preview mode effects.
Press the OK Button to confirm and apply your mode type.
Selecting sRGB will affect:
Affected Function
» Color Temperature
» Low Blue Light
Function Status Unable to select
OFF
Low Blue Light protects your eyes against
ON
blue light. When enabled, Low Blue Light adjusts the screen color temperature to a
more yellow glow.
When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.
OFF
HDCR enhances image quality by
ON
increasing the contrast of images.
Activating HDCR will affect:
Affected Function » Brightness » MPRT
Function Status Unable to select Set to OFF
OFF ON
Activating MPRT will affect:
Affected Function
» Response Time » Brightness » Screen Size 1:1 » Adaptive-Sync » HDCR » PIP/PBP
Function Status Unable to select Set to Auto
Set to OFF
Image Enhancement
OFF Weak Medium Strong Strongest
MPRT is available when the refresh rate is over 85Hz.
Image Enhancement enhances image edges to improve their acutance.
OSD Menus 13
Image
1st Level Menu 2nd/3rd Level Menu
Brightness
0-100
Contrast Sharpness
0-100 0-5
Color Temperature
Screen Size
Cool Normal Warm Customization
Auto 4:3 16:9 1:1
R (0-100) G (0-100) B (0-100)
Description
Properly adjust Brightness according to the surrounding lighting.
Properly adjust Contrast to relax your eyes.
Sharpness improves clarity and details of images.
Use Up or Down Button to select and preview mode effects.
Press the OK Button to confirm and apply your mode type.
Users can adjust Screen Size in any mode, any resolution and any screen refresh rate.
Activating Screen Size 1:1 will affect:
Affected Function
» MPRT » Adaptive-Sync » PIP/PBP
Function Status Set to OFF
Input Source
1st Level Menu HDMITM 1 HDMITM 2 DP Type C Auto Scan
2nd Level Menu
OFF ON
Description Users can adjust Input Source in any mode.
Users can use the Navi Key to select Input Source at below status: · While "Auto Scan" is set to "OFF" with the monitor at power saving mode; · While "No Signal" message box is shown on the monitor.
14 OSD Menus
PIP/PBP
1st Level Menu 2nd/3rd Level Menu Description
OFF PIP
PBP
Source HDMITM 1 HDMITM 2 DP Type C
PIP Size Small Medium Large
Location Left Top Right Top Left Bottom Right Bottom
Display Switch Audio Switch Source 1 HDMITM 1
HDMITM 2 DP Type C Source 2 HDMITM 1
PIP (Picture in Picture) allows users to simultaneously display multiple video sources on one screen. One program is displayed on the full screen at the same time as one or more other programs are displayed in inset windows.
PBP (Picture by Picture) is a similar feature that displays two input sources side-by-side on the screen.
Display Switch allows users to switch between primary and secondary input sources.
If there is only one signal input, the Display Switch and Audio Switch will be grayed out.
Activating PIP/PBP will affect:
Affected Function
» Response Time
» MPRT » Adaptive-Sync » HDMITM CEC
» PIP: Screen Size 1:1
» PBP: Screen Size 4:3/ 16:9/ 1:1
Function Status Unable to select Set to OFF
Set to Auto & unable to select
HDMITM 2
DP
Type C
Display Switch
Audio Switch
OSD Menus 15
Navi Key
1st Level Menu
Up Down Left Right
2nd Level Menu OFF Brightness Game Mode Screen Assistance Alarm Clock Input Source PIP/PBP Mode Refresh Rate Info. On Screen Night Vision
Description
All Navi Key items can be adjusted via OSD Menus.
Setting
1st Level Menu 2nd Level Menu Description
Language
English Français Deutsch Italiano
Users have to press the OK Button to confirm and apply the Language setting.
Language is an independent setting. Users' own language setting will override the factory default. When users set Reset to Yes, Language will not be changed.
Español
Português
Bahasa Indonesia
Türkçe
(More languages coming soon)
Transparency 0~5
Users can adjust Transparency in any mode.
16 OSD Menus
1st Level Menu 2nd Level Menu OSD Time Out 5~30s Power Button OFF
Standby
Info. On Screen OFF
ON
HDMITM CEC
OFF
ON
Reset
YES
NO
Description
Users can adjust OSD Time Out in any mode.
When set to OFF, users can press the power button to turn off the monitor.
When set to Standby, users can press the power button to turn off the panel and backlight.
The information of the monitor status will be shown on the right side of the screen.
HDMITM CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® SwitchTM, Xbox Series X|S consoles and various audio-visual devices that are CEC-capable.
If HDMITM CEC is set to ON:
· The monitor will automatically power on when the CEC device is turned on.
· The CEC device will enter power saving mode when the monitor is turned off.
· When Sony PlayStation®, Nintendo® SwitchTM, or Xbox Series X|S console is connected, Game Mode and Pro Mode will be automatically set to default modes and can be adjusted to users' preferred modes later.
Users can Reset and restore settings to original OSD Default in any mode.
OSD Menus 17
Specifications
Monitor Size Curvature Panel Type Resolution Aspect Ratio Brightness
Contrast Ratio Refresh Rate Response Time
I/O
View Angles DCI-P3*/ sRGB Surface Treatment Display Colors Monitor Power Options External Power Supply Power Input Power Output Adjustment (Height) Adjustment (Tilt) Adjustment (Swivel) Adjustment (Pivot) Kensington Lock
G274QPX 27 inch Flat Rapid IPS 2560 x 1440 16:9 Typical SDR: 300 nits Peak HDR: 400 nits 1000:1 240Hz 1ms (MPRT) 1ms (GTG) DisplayPort x 1 HDMITM Connector x 2 USB Type-C Port (DP Alt Mode) x 1 Headphone Jack x 1 178°(H) , 178°(V) 98%/116% Anti-glare 1.07B (8 bits + FRC) 19.0V 5.79A 110.01W, 19.0V 100~240V, 50/60Hz, 1.5A 19.0V 5.79A 0 ~ 130mm -5° ~ 20° -45° ~ 45° -90° ~ 90° Yes
18 Specifications
Monitor VESA Mounting
Dimension (W x H x D)
G274QPX Plate Type: 75 x 75 mm Screw Type: M4 x 10 mm
· Thread Diameter: 4 mm · Thread Pitch: 0.7 mm · Thread Length: 10 mm 613.5 x 402.1 x 196.5 mm
Weight
Net
5.95 Kg
Gross
8.10 Kg
Environment
Operating
Temperature: 0 to 40 Humidity: 20% to 90%, non-condensing Altitude: 0 ~ 5000m
Storage
Temperature: -20 to 60 Humidity: 10% to 90%, non-condensing
* Based on CIE1976 test standards.
Specifications 19
Preset Display Modes
Important
All information is subject to change without prior notice.
Standard Full HD QHD
Video Timing Resolution
PBP Mode
Resolution
1920x1080 @60Hz
2560x1440 @60Hz
@120Hz
@144Hz
@165Hz
@180Hz
@240Hz
720P
1080P
@60Hz
@120Hz
2160P
@30Hz
@60Hz
1280x1440 @60Hz
HDMITM V V V V
V V V V V V
DP/ Type-C V V V V V V V V V V
V
20 Preset Display Modes
Troubleshooting
The power LED is off.
· Press the monitor power button again. · Check if the monitor power cable is properly connected.
No image.
· Check if the computer graphics card is properly installed. · Check if the computer and monitor are connected to electrical outlets and are
turned on. · Check if the monitor signal cable is properly connected. · The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
· Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display.
No Plug & Play.
· Check if the monitor power cable is properly connected. · Check if the monitor signal cable is properly connected. · Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
· Avoid using any video extension cables. · Adjust brightness and contrast. · Adjust RGB color or tune color temperature. · Check if the monitor signal cable is properly connected. · Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
· Change the refresh rate to match the capabilities of your monitor. · Update your graphics card drivers. · Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
Troubleshooting 21
Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.
Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).
Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Battery
Please take special precautions if this device comes with a battery.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.
Avoid leaving a battery in an extremely high temperature or extremely low air pressure environment that can result in an explosion or the leakage of flammable liquid or gas.
Do not ingest battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
BSMI:
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
22 Safety Instructions
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface. To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it safe in place. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Do not leave the device in an unconditioned environment with a storage temperature above 60 or below -20, which may damage the device. The maximum operating temperature is around 40. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: · The power cord or plug is damaged. · Liquid has penetrated into the device. · The device has been exposed to moisture. · The device does not work well or you can not get it working according to the User
Guide. · The device has dropped and damaged. · The device has obvious sign of breakage.
Safety Instructions 23
TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users' eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light. Place the screen 20 28 inches (50 70 cm) away from your eyes and a little below
eye level. Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time. Take breaks for 20 minutes every 2 hours. Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks. Make stretches to relieve body fatigue or pain during breaks. Turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
TÜV Rheinland has tested this product to ascertain whether the display produces visible and invisible flicker for the human eye and therefore strains the eyes of users.
TÜV Rheinland has defined a catalogue of tests, which sets out minimum standards at various frequency ranges. The test catalogue is based on internationally applicable standards or standards common within the industry and exceeds these requirements.
The product has been tested in the laboratory according to these criteria. The keyword "Flicker Free" confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 - 3000 Hz under various brightness settings. The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled. (The availability of Anti Motion Blur/MPRT varies by products.)
24 TÜV Rheinland Certification
Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
Regulatory Notices 25
WEEE Statement
Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of 10 March 2017, 139, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
26 Regulatory Notices
Green Product Features
Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling information.
Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time. 2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int'l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int'l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
Technical Support
If a problem arises with your product and no solution can be obtained from the user's manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
Regulatory Notices 27