Instructions for J HEWIT AND SONS models including: Pearl Glue, Pearl, Glue
– J Hewit & Sons
Safe Handling – J Hewit & Sons • Scottish Leather
Pearl Glue A traditional pearl glue, derived from animal protein. A glue of low colour and odour which dissolves readily. Instructions: · To prepare for use, add 1 part of glue to 1.5 parts cold water whilst agitating. · Leave to soak for approximately 1 hour and then dissolve by warming. · At no time during dissolving period (or in use) should the temperature exceed 1300F (550C) or serious degradation and therefore loss of adhesion properties may occur. First Aid and Handling General information Inhalation Ingestion Skin contact Eye contact Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. No specific recommendations. Rinse mouth thoroughly with water. Give plenty of water to drink. Keep affected person under observation. Get medical attention if any discomfort continues. Wash skin thoroughly with soap and water. Rinse immediately with plenty of water. Continue to rinse for at least 10 minutes. NB: The information supplied is, to the best of knowledge, true and accurate, but recommendations or suggestions made are without guarantee since the conditions of use are beyond our control.Microsoft Word LTSC