1:10 High Speed Drift Truck
Distributed by: Hyper Toy Company
Contact: help@hypertoys.com
Copyright 2021 HyperToys
Product Overview
This document provides instructions and information for the Hyper Toy Company 1:10 High Speed Drift Truck.
Key Features:
- High Speed Drift Truck
- 2.4 GHz Radio Control
- Lithium Battery USB Charger
- Full Function Control
- Suitable for ages 8+
Important Safety Information:
- Battery Warning: Do not mix battery types (alkaline, standard, rechargeable), do not mix old and new batteries, do not dispose of batteries in fire as they may explode or leak.
- Choking Hazard: Contains small parts, not for children under 3 years. Adult supervision is required.
- FCC Compliance: This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS 210 standard. Operation is subject to conditions that prevent harmful interference.
Contents
- Vehicle
- Remote Controller
- Instruction Manual
- Rechargeable Battery (Installed Inside Vehicle)
- USB Charging Cable
Battery Installation
Remote Controller Battery Installation:
- Remove the battery cover by pressing the clip on top.
- Insert 2 x 1.5V AA batteries, ensuring correct polarity.
- Close the battery cover.
Vehicle Battery Installation:
- Unscrew the screw on the battery cover.
- Place the rechargeable battery into the battery slot and connect it to the vehicle.
- Close the battery cover and retighten the screw.
Charging the Battery:
- Remove the battery cover by loosening the screw.
- Disconnect the battery from the vehicle.
- Connect the USB power output from a USB plug or computer USB to the battery.
- The USB charging light will turn off when charging is complete (approx. 150 minutes).
Functions
The remote controller offers the following functions:
- Forward
- Backward
- Drift Left
- Drift Right
- Drift Front Left
- Drift Front Right
- Drift Back Left
- Drift Back Right
- Turn Left
- Turn Right
- Demo Mode
The vehicle will enter sleep mode after 5 minutes of inactivity. Press the 'Turn Left' button once to wake it up.
Troubleshooting
| Problem | Cause | Processing Method |
|---|---|---|
| The remote control fails to function. | 1. Remote control is in 'OFF' position. | 1. Ensure the remote control is in the 'ON' position. |
| 2. Batteries inserted with incorrect polarity. | 2. Check battery insertion according to polarity markings. | |
| 3. Low battery. | 3. Replace batteries. | |
| 4. Out of controllable distance. | 4. Keep remote control within 30 meters and pointed at the car. | |
| 5. No pairing frequency between remote and car. | 5. Power off remote, then car. Power on car, then remote. Pull control lever to re-pair. | |
| The remote control car cannot be controlled. | 1. Remote control is in 'OFF' position. | 1. Ensure the remote control is in the 'ON' position. |
| 2. Battery pack not connected correctly to the car. | 2. Ensure the battery pack is connected correctly according to polarity markings. | |
| 3. Low battery. | 3. Recharge or replace the battery pack. | |
| 4. No pairing frequency between remote and car. | 4. Power off remote, then car. Power on car, then remote. Pull control lever to re-pair. |
Important Safety Notice
WARNING: Contains small parts that may cause a choking hazard. Not suitable for children under 3 years old. Adult supervision and guidance are required during use. Keep these instructions for future reference.
