Jasion X-Hunter User Manual
Introduction
Welcome to the Jasion X-Hunter electric bike. This manual provides essential information for safe operation, assembly, and maintenance of your new e-bike. Please read it thoroughly before your first ride.
Important Safety Information
⚠️ Always prioritize safety. Wear a helmet and appropriate protective gear. Ensure your bike is in good working order before each ride. Familiarize yourself with local traffic laws regarding electric bicycles.
- Do not exceed the maximum weight limit.
- Avoid riding in adverse weather conditions if possible.
- Ensure brakes are functioning correctly before riding.
- Keep hands on the handlebars and be aware of your surroundings.
Package Contents
Your Jasion X-Hunter package should include:
- Jasion X-Hunter Electric Bike Frame
- Front Wheel
- Handlebar Assembly
- Seatpost and Saddle
- Pedals (Left and Right)
- Battery Charger
- Tool Kit
- User Manual (this document)
Please check all items upon arrival. Contact customer support if anything is missing or damaged.
Assembly Instructions
Follow these steps carefully to assemble your Jasion X-Hunter.
1. Handlebar Installation
Insert the handlebar stem into the head tube of the frame. Align it straight and tighten the stem bolts securely. Ensure the handlebars are centered and parallel to the front wheel.
[Diagram: Handlebar stem insertion into head tube and tightening bolts.]
2. Pedal Installation
Identify the left (L) and right (R) pedals. Thread the right pedal clockwise into the right crank arm and the left pedal counter-clockwise into the left crank arm. Tighten firmly with a pedal wrench.
[Diagram: Pedal threading into crank arms, noting L/R markings.]
3. Seatpost and Saddle Installation
Insert the seatpost into the seat tube of the frame. Adjust to your desired height and tighten the seatpost clamp securely. Ensure the saddle is facing forward.
[Diagram: Seatpost insertion into frame and securing clamp.]
4. Front Wheel Installation
Ensure the front brake is disengaged. Insert the front wheel into the front fork dropouts. Secure the wheel using the quick-release skewer or axle nuts.
[Diagram: Front wheel insertion into fork dropouts and securing mechanism.]
5. Battery Installation
Slide the battery pack into the designated mount on the frame. Ensure it clicks securely into place. Refer to the battery section for charging instructions.
[Diagram: Battery installation into frame mount.]
6. Final Checks
After assembly, double-check all bolts and connections are tight. Ensure brakes are adjusted correctly and wheels spin freely.
Pre-Ride Checklist
- Tires: Check for proper inflation.
- Brakes: Test front and rear brakes for responsiveness.
- Battery: Ensure it is charged sufficiently for your ride.
- Chain: Check for lubrication and proper tension.
- Quick Releases: Confirm wheels and seatpost are securely fastened.
Operating Your E-Bike
Powering On/Off
To turn the e-bike on, press and hold the power button on the display control panel for a few seconds. To turn it off, press and hold the same button again.
[Icon: Power button symbol ?]
Display and Controls
The display provides information such as speed, battery level, and assist level. Use the control buttons (+/-) to adjust the Pedal Assist System (PAS) level.
Display Icons:
- Battery Level ?: Indicates remaining battery charge.
- Speedometer ?: Shows current speed.
- PAS Level ⚙️: Displays the current level of motor assistance (e.g., 0-5).
- Odometer ?️: Tracks total distance traveled.
Pedal Assist System (PAS)
The PAS provides assistance as you pedal. Higher levels offer more assistance. Level 0 typically means the motor is off.
Throttle (if equipped)
Some models may feature a throttle for motor power without pedaling. Twist or push the throttle according to its design. Use the throttle responsibly and be aware of local regulations.
[Icon: Throttle symbol ▶️]
Charging the Battery
Connect the charger to the battery and then plug it into a standard electrical outlet. The charging indicator light on the charger will show the charging status.
- Charge fully before first use.
- Use only the provided charger.
- Do not charge in extreme temperatures.
- Store the battery in a cool, dry place when not in use.
[Diagram: Battery connected to charger and plugged into wall outlet.]
Maintenance and Care
Regular maintenance ensures longevity and safe operation.
- Cleaning: Wipe the bike with a damp cloth. Avoid high-pressure water jets.
- Tires: Check tire pressure regularly and inflate to the recommended PSI.
- Brakes: Inspect brake pads and rotors for wear. Adjust cables as needed.
- Chain: Keep the chain clean and lubricated.
- Bolts: Periodically check and tighten all bolts and screws.
Troubleshooting
If you encounter issues, consult this guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor not working | Battery not charged or not connected properly. | Charge battery. Ensure battery is securely installed. Check power button. |
| Display is blank | Battery depleted or loose connection. | Charge battery. Check battery connection. |
| Brakes are weak | Worn brake pads or loose cables. | Inspect and replace brake pads if worn. Adjust brake cables. |
| Unusual noises | Loose components or chain issues. | Check all bolts. Lubricate chain. Inspect for damage. |
Technical Specifications
| Specification | Details |
|---|---|
| Model | Jasion X-Hunter V1(eu) |
| Motor Power | [Specify Wattage, e.g., 250W] |
| Battery Capacity | [Specify Voltage/Ah, e.g., 36V 10Ah] |
| Max Speed | [Specify Speed, e.g., 25 km/h] |
| Range | [Specify Range, e.g., 40-60 km] |
| Wheel Size | [Specify Size, e.g., 27.5 inches] |
| Brakes | [Specify Type, e.g., Disc Brakes] |
| Weight | [Specify Weight, e.g., 25 kg] |
| Rider Weight Limit | [Specify Limit, e.g., 120 kg] |
Warranty Information
Please refer to the separate warranty card or Jasionbike website for detailed warranty terms and conditions.
For support, visit: https://www.jasionbike.com
