GVM Lights Official Store - Great Video Maker - Video Lights
Instruction Manual for GVM models including: GVM-S185 Great Video Maker, GVM-S185, Great Video Maker, Video Maker, Maker
GVM-S185 User Manual - GVM Official Site
1 giorno fa — Maximum load capacity of 10KG and quick-release plate provide compatibility and convenience for quick installation and removal of most cameras and camcorders.
Product Manuals - GVM Official Site
File Info : application/pdf, 12 Pages, 5.70MB
DocumentDocumentGVM-S185 V0 CONTENTS Product Introduction --------------------------------- Page 1 Disclaimers -------------------------------------------- Page 1 Product Parameter ----------------------------------- Page 2 Product Structure Diagram -------------------------- Page 3 Installation Method ---------------------------------- Page 4 Function Introduction & Instructions For Use -------------------------------------------------------------------- Page 5~8 Precautions ------------------------------------------- Page 9 Packing List ------------------------------------------- Page 9 PRODUCT INTRODUCTION The GVM-S185 is a tripod designed by GVM specifically for videographers and filmmakers. The three-stage design with the adjustable height, range from 85cm to 185cm can meet the different needs of users in various shooting environments. Maximum load capacity of 10KG and quick-release plate provide compatibility and convenience for quick installation and removal of most cameras and camcorders on the market. The attached quick plate is equipped with 1/4 "and 3/8" screws make it easy to use with various cameras for a seamless shooting experience. DISCLAIMERS 1To maximize the benefits of your tripod, please read the manual thoroughly before using the product. Failure to follow the instructions and warnings provided in this document could result in damage to the product as well as potential harm to you and others, or surrounding items. 2By using this product, you are deemed to have carefully read the disclaimer and warning, understand and acknowledge all the terms and contents of this statement, and promise to take full responsibility for the use of this product and the possible consequences. 3Design and specifications are subject to change without notice. 1 PRODUCT PARAMETER Model: GVM-S185 Weight: 4.4kg Sections: 3 Pipe Diameter: 18/16mm Minimum Height: 85cm Maximum Height: 185cm Storage Height: 90cm Maximum Load Capacity: 10kg Head Type: Hydraulic Fluid head Leg Type: Three legs Leg Lock Type: Knob lock Material: Aluminum alloy 2 PRODUCT STRUCTURE DIAGRAM Hydraulic Fluid Head Leveling Grip Pan Bar Locking Knob Foot Tube Mid-level spreader Locking Knob Pan Bar Locking Knob Quick Release Plate Locking Knob Quick Release Plate QR Plate Release Button Tilt Lock Bubble Level Pan Lock Base Pan Bar 3 INSTALLATION METHOD Install the pan bar onto the fluid video head as shown below. Adjust the handle to a proper Angle and tighten the fixing knob of the handle to install the handle on the fluid head. (The pan bar can be installed to the rosette style mounting point on either sides of the fluid head according to individual needs.) 4 FUNCTION INTRODUCTION & INSTRUCTIONS FOR USE Tripod legs expansion and retraction Pull the feet of the tripod outward to unfold the tripod legs; Push the tripod's feet inward to fold the tripod legs in. 5 Height Adjustment Loosen the locking knobs to adjust the height of the tripod, after adjusting to the desired height, tighten locking knobs to fix the tripod in place. 6 Quick Release Plate Installation and use The indent structure of the quick-release plate features a safety pin mechanism designed to prevent equipment from slipping due to accidental mis-operation or human error. Removing the quick release plate: Loosen the QR plate locking knob, press and hold the red safety button (Slide towards either direction) to remove the Plate. Attaching the quick release plate: As shown in the installation diagram below, Slide in the quick release plate to the slot on the fluid head, and then lock the quick release plate locking knob. QR Plate Release Button QR Plate Locking Knob 7 Tilt & Pan adjustment Tilt angle adjustment: Loosen or tighten the knob 1 to adjust the tilt 1 angle of the fluid head. Pan angle adjustment: Loosen or tighten the knob 2 to adjust the horizontal pan angle of the fluid head. 1 2 8 PRECAUTIONS 1Do not exceed the specified maximum load when using this product. 2When using the monopod, ensure that the tripod shaft is securely locked in a safe position. 3Do not operate at temperatures below minus 20 degrees Celsius and above 70 degrees Celsius. When in a humid, sand, dust environment, please wipe off the monopod with a dry cloth after use. If used in a rainy environment, fully extend the tube sections to allow it to dry completely. It is recommended to leave it out for a few days till the moisture fully evaporates before storing it away. Avoid using the monopod in environments with seawater. 4Exercise caution when using in dangerous terrain or environments. 5Avoid intensive movements while a camera or a camcorder is attached to the monopod. 6The product does not require lubricants. However, if lubrication is necessary in certain situations, please use standard lubricating oil or grease. 7To ensure personal safety, avoid contact with electronic devices, high-pressure equipment, or strong chemicals while using the product. PACKING LIST Name Quantity Tripod 1 Fluid Video Head 1 Carry Bag 1 9 Remark GVM Official Website Facebook Huizhou Latu Film Equipment Co., Ltd. Web: www.gvmled.com B&H Email: bh@gvmled.com GVM Email: support@gvmled.com Amazon Email: amazonsupport@gvmled.com Warehouse Address: 12285 MCNULTY RD, STE 105 PHILADELPHIA, Pennsylvania 19154, USA 10