Kirsch® Automation

Enabling Apple HomeKit Quick Start Guide

Before You Begin:

To enable Apple® HomeKit®, you will need:

A Kirsch® Automation Hub, updated with the latest firmware.
A HomeKit setup code (located on the bottom of the Kirsch Automation Hub).
An iPhone® or iPad® with the latest version of iOS.
The Apple Home app downloaded and installed on your iPhone or iPad.

Tips

Using the Kirsch Automation Remote to control automated shades integrated with Apple HomeKit is not recommended. For optimal system performance, the Apple Home app and Kirsch Automation App are the recommended control options.
Complete all Shade, Room, and Scene configuration in the Kirsch Automation App prior to enabling HomeKit and using the Home app.
If any changes to Shade and/or Scene information are made in the Apple Home app, you may need to confirm those changes and resolve any conflicts the next time you open the Kirsch Automation App.
Once HomeKit is enabled, it is recommended that the user who added the Kirsch Automation Hub to their HomeKit home share access with family members using the Home app. This ensures everyone in the home can use Siri, and that all changes stay in sync.

Getting Started:

Step 1: Open the Kirsch Automation App

Open the Kirsch Automation App on your iPhone or iPad. Access the menu and select "HomeKit & Siri". Then, select "Enable".

[Visual Description: The Kirsch Automation App interface is shown, displaying a menu with options including "HomeKit & Siri". A subsequent screen indicates "Works with HomeKit" and provides an "Enable" button.]

Step 2: Manually Enter HomeKit Setup Code

Select the option to manually enter the HomeKit setup code.

[Visual Description: The Apple Home app screen for adding an accessory is displayed, offering options to scan a code or enter it manually. The "Manual Code" option is highlighted.]

Step 3: Locate and Enter Setup Code

Locate the setup code on the bottom of the Kirsch Automation Hub and enter it as indicated.

[Visual Description: An image shows the bottom of a Kirsch Automation Hub with a visible HomeKit setup code (e.g., XXX-XX-XXY). A screenshot of the Apple Home app's code entry interface with a numeric keypad is also shown.]

Step 4: Place Hub and Treatments

Place the hub and each window treatment in the appropriate room.

[Visual Description: Screenshots from the Apple Home app illustrate assigning the Hub and shades to specific rooms, such as "Kitchen" or "Basement".]