EMVCo Letter of Approval – EMV Contactless Level 1 Mobile Product
Date: June 30, 2025
Approval Details
Approval Number: MTA_LOA_MOTO_05682
Approval Date: June 30, 2025
EMVCo Website Publication Date: June 27, 2025
Approval Expiration Date: June 30, 2028
Product Information
Product Provider Name: Motorola Mobility LLC.
Registration Number: MOTO.V 14 0062
Commercial Name: moto g75 5G
Product Name: XT2437-3
Product Version: PVT
Type Allocation Code (TAC) or product identifier for testing sample: 00440015
Type Allocation Code (TAC) or product identifier for production¹: 35369496
Conformance Statement
Implementation Conformance Statement: MTA_ICS_MOTO_05682_99
EMV Level 1 Contactless Interface Specification: Version 3.2
EMV Specification Bulletins:
- Contactless Level 1 Analog Test Cases: Version 3.2b
- Contactless Level 1 Digital Test Cases: Version 3.2b
- Contactless Level 1 Interoperability Test Requirements: Version 1.7
- Contactless Level 1 Test Cases Bulletins:
Contactless Communication Protocol
Contactless Communication Protocol: Type A, Type B
Execution Environment: UICC2 slot 1, UICC2 slot 2, eSE, HCE, eUICC
Mobile Product Operating System Name and Version: Android Version 15
NFC Controller Name and Version: SN220E Version N/A
NFC Controller Firmware Name and Version: N/A Version 1.1.35
Letter of Approval Details
EMVCo, LLC has reviewed the submitted reports for the Motorola moto g75 5G and found sufficient evidence of conformity to EMV Level 1 Contactless Interface Specification version 3.2 and other EMVCo requirements.
This approval grants EMVCo mobile type approval and includes the product in EMVCo's list of approved products. The approval is subject to the terms and conditions of the type approval agreement and any attached exhibits.
This approval applies to the product as tested. Minor changes may be accommodated, but significant changes require notification to EMVCo and may necessitate retesting.
The product will be listed on the public EMVCo website after the publication date. This approval is valid as long as the approval number is posted on the EMVCo website.
Authorised by: Keith Fojtik, Card Testing Group Chair, EMVCo, LLC
Attachment A: Specific Terms and Conditions to Letter of Approval
During testing, the following issues were identified. Restrictions identified must be disclosed to customers (issuers or other product providers to whom the Product Provider intends to sell the product).
Restrictions, if any:
Comments, if any:
- This product may perform transactions in Type A and Type B regardless of the technology (Type A or Type B) requested by the UICC.
- HCE Execution environment has been tested with kernels C2, C3, C4, C5.
¹ The value of the TAC or the product identifier for production is for information purposes only. Only the TAC value or the product identifier of the testing sample is checked by EMVCo.
² The product was tested with a UICC provided by EMVCo. EMVCo does not guarantee that the product will function with other UICCs or in combination with other products.
