Rowenta Air Brush 3D User Manual and Safety Instructions

General Description

The Rowenta Air Brush 3D is a versatile hair styling tool designed for drying and styling hair simultaneously. It features multiple attachments and settings for various hair types and styles.

Key Components:

• A - Controls: On/off button, temperature settings, and blowing speed settings.
• B - Usage Selector: Switch to select between drying and styling modes.
• C - Drying Nozzle: An attachment for focused drying.
• D - Styling Brush: A brush attachment designed for shaping and styling hair.
• E - Brush Protector: A cover to protect the styling brush when not in use.

Diagram Description: The appliance is shown with labels pointing to its main components: A for controls, B for the mode selector, C for the drying nozzle, D for the styling brush, and E for the brush protector.

Safety Instructions

Please read these instructions carefully before use.

• For your safety, this appliance complies with applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental...).
• The appliance's accessories become very hot during use. Avoid contact with skin. Ensure the power cord does not touch hot parts.
• Check that your electricity supply voltage matches the appliance's voltage. Incorrect connection can cause irreparable damage not covered by warranty.
• For additional protection, a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is recommended for the bathroom electrical circuit. Consult an installer.
• Burn Hazard: Keep the appliance out of reach of young children, especially during use and cool-down.
• Never leave the appliance unattended when connected to the power supply.
• Always place the appliance on a heat-resistant, stable, flat surface, using its stand if provided.
• Ensure the appliance's installation and use comply with your country's standards.
• WARNING: The crossed-out bathtub symbol (ISO 7010-P026 (2011-05)) indicates that this appliance must not be used near bathtubs, showers, basins, or other water-containing vessels. [water hazard symbol]
• For countries not subject to EU regulations: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or those lacking experience or knowledge, unless supervised or instructed by a responsible person. Supervise children to ensure they do not play with the appliance.
• For countries subject to EU regulations: This appliance can be used by children aged 8 and above, and persons with reduced capabilities, if supervised or instructed on safe use and aware of the hazards. Children must not play with the appliance. Cleaning and maintenance by children without supervision is prohibited.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.
• Stop using the appliance and contact an Authorised Service Centre if it has been dropped or does not work correctly.
• The appliance has a thermal safety device. In case of overheating (e.g., blocked rear grill), it will stop automatically. Contact After-Sales Service.
• The appliance must be unplugged: before cleaning and maintenance, if it malfunctions, or as soon as use is finished.
• Do not use if the cord is damaged.
• Do not immerse in water or rinse under running water, even for cleaning.
• Do not hold with damp hands.
• Hold by the handle, not the hot casing.
• Unplug by pulling the plug, not the cord.
• Do not use an extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C or above 35°C.

Diagram Description: Illustrations show the crossed-out bathtub symbol indicating a water hazard. Other diagrams depict safe handling practices, such as holding by the handle and unplugging by the plug.

Instructions for Use

Please follow these steps for optimal use.

1. Remove the protective cover before use.
2. Brush Protection: To maintain brush efficiency, always replace the brush protector (E) after each use and once the device has completely cooled down.
3. Temperature/Air Speed (A): Adjust the settings using control A for desired air speed (3 positions) and temperature (3 positions).
4. Brush Position Selection: Turn the button on top of the product (B) to change the function and air position (drying, smoothing brush, oval brush). Do not change modes without waiting for the device to cool down.
5. Cleaning: To maintain performance, clean the filter once a month using the small brush provided. Ensure the appliance is unplugged before cleaning the filter.

Diagram Description: Illustrations guide the user through preparing the appliance (removing cover), selecting settings (A, B), attaching different nozzles (C, D), and using the brush for styling. A diagram shows cleaning the filter with a small brush and unplugging the appliance.

Environmental Protection

Your appliance contains valuable materials that can be recovered or recycled. Please leave it at a local civic waste collection point for proper disposal.

Diagram Description: An illustration shows the symbol for separate collection of waste electrical and electronic equipment (a crossed-out wheeled bin).