TWS User Guide
Introduction
Thank you for choosing the True Wireless Earbuds. We appreciate your trust in our product. Before you start using your new earbuds, we kindly request that you carefully review the user manual provided with your purchase. This manual contains important information and instructions to ensure optimal usage and performance.
Product Specifications
| Model | P13 |
|---|---|
| Bluetooth Version | 5.4 |
| Supports | A2dp, Avctp, Avdtp, Avrcp, Hfp, Spp, Smp, Att, Gap, Gatt, Rfcomm, Sdp, l2cap |
| Transmission Distance | 10m |
| Driver | 13mm |
| Frequency Range | 2402MHz-2480MHz |
| Playing time | 5h |
| Talk time | 4h |
| Charging time | 1.5h |
Pairing Your Earbuds with Devices
- Open the charging case and take earbuds out.
- Select "P13" in the list of available Bluetooth devices.
- Connect the earbuds to the device and follow the prompts.
Functional Operation Description
Music mode:
- Click L/R: Play/Pause
- Two hits L/R: Next Song
- Three hits L/R: Previous Song
Call mode:
- Click L/R: Answer
- Click L/R: End Call
Activate Voice Assistant:
Touch the left or right ear for 2 seconds to activate or exit Siri.
Left or right long touch 2 seconds: Reject Call
Charging Your Earbuds
- Place the earbuds into the charging case. Do not insert earbuds in the charging case if they are wet or dirty.
- Close the charging case, and connect the Type-C Charging Cable to charge the earbuds.
Note: Place both earbuds in the charging case and insert the attached Type-C cable to fully charge them before initial use.
Indicator
The built-in LED indicates the battery status of the charging case and earbuds.
Charging case status:
| Battery status | Color of indicator |
|---|---|
| When the charging case is being charged (Under charging) | Display power 100% |
| Fully charged | Display power 100% |
Earbuds charging status:
| Battery status | Color of indicator |
|---|---|
| When the earbuds are being charged (Under charging) | White light |
| Fully charged | Lights off |
In the Box
- Wireless Earbuds X1
- Type-C charging cable X1
- User manual X1
Care and Maintenance
To ensure optimal performance and longevity of your wireless earbuds, please follow these guidelines:
- If you do not use the product for a long period of time, it's recommended to recharge it at least once a month to extend its life and maintain the normal use performance.
- Keep the product in a dry location to prevent damage. Avoid exposing it to excessive moisture or humidity.
- Do not dispose of this product in fire, as it may cause batteries to explode or leak.
- To clean the product, lightly use a cloth and gently wipe the exterior surface. Avoid using harsh chemicals or solvents.
- Do not disassemble this product, as it contains no user-serviceable parts. Unauthorized disassembly may result in damage or voiding of warranty.
FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
