Instruction Manual for VEVOR models including: IVY-VVR-013 Kids Toy Open Organizer, IVY-VVR-013, Kids Toy Open Organizer, Open Organizer
KIDS TOY OPEN ORGANIZER MODEL:IVY-VVR-013 Assembly steps MODEL:IVY-VVR-013 KIDS TOY OPEN ORGANIZER This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. 1 SAFETY INSTRUCTIONS NOTES: Please read the following precautions carefully before assembly!! 1. This product is not suitable for children under 3 years old. 2. Home only; For indoor use only. 3. Warning! Contains small component hazards before assembly, for adult assembly only. 4. Please place on a flat and spacious ground, with appropriate open space around the installation area. 5. Do not place in water or permeable ground, uneven or rough ground, slope and other places. 6. Before use, please carefully check whether all parts are firm and whether there are other unsafe factors around. 7. During use, please check the product body and nuts regularly. lf there is breakage or wear,please stop using; Otherwise, rollover or other hazards may occur. 8. lf the product nut has been worn and cannot be tightened, contact the manufacturer to purchase and replace the corresponding parts. 9. The packaging is not a toy, please keep it properly and away from infants to avoid danger. 10. Store in a cool and dry place, away from direct sunlight, and away from fire and heat sources. 11. The maximum load of this product is 10 kg, do not use overweight. 12. Be sure to use under adult supervision;Do not allow children to play with toys that have been disintegrated, damaged or deformed to avoid accidental swallowing, choking and other injuries. 13. Please save the instructions for future reference. Thank you very much for choosing this KIDS TOY OPEN ORGANIZER. Please read all of the instructions before using it.The information will help you achieve the best possible results. SAVE THIS MANUAL 2 PARTS LIST 3 4 ASSEMBLY STEP 5 6 7 8 9 10 11 12 First drill holes on the wall where it is placed.and then use expansion screw (Q) to fix the cabinet with screw (P).The installation location is as shown in the figure below. 13 14 PRODUCT PARAMETER Model Color Safe Loading Weight Product Size IVY-VVR-013 White 10kg 1387*300*945mm Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 UK EC REP REP YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. 15WPS 文字