Braeburn Thermostats and Zoning Systems
Builder Series - Value Models
500 / 505 Mechanical Thermostats
A white thermostat with a digital display and physical buttons, featuring megaswitch magnetic switch technology.
500 Series Features:
- Heavy Duty Ball-Type System and Fan Switches
- Environmentally Safe - Mercury Free
- Front Mounted Wiring Terminals
- Heavy Duty Anticipator
- Integrated Sub-Base for Easy Installation
- Electro-Plated Wiring Terminals to Help Prevent Corrosion
- No Leveling Required During Installation
500 - 1H/1C: Single Stage Conventional or Heat Pump Systems; 24 Volt AC Gas, Oil, Electric and Millivolt Systems; System Lever COOL/OFF/HEAT; Fan Control Lever AUTO/ON; 2 Wire Hydronic Zone Systems.
505 - Heat Only: Heat Only; 24 Volt AC Gas, Oil, Electric and Millivolt Systems; System Lever OFF/HEAT; 2 Wire Hydronic Zone Systems.
Durable Clear Labels with FREE Contractor Branding Available. See page 24.
1000NC / 1200NC Non-Programmable Thermostats
A white thermostat with a digital display featuring a 'Bright Blue Display' backlight and several buttons.
Get the comfort of digital control for close to the cost of a mechanical thermostat.
1000NC/1200NC Features:
- Bright Blue Display Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Compressor Short Cycle Protection
- Separate O & B Terminals
- Front Access Reset Button
- Gas / Electric Fan Switch
- Low Battery Indicator
- F° / C° Switch
- Trilingual Packaging and Instructions
1000NC - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
1200NC - 2H/1C: Conventional Systems Up to 2H / 1C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
Accessories Available. See Page 22.
2000NC / 2200NC Programmable Thermostats
A white thermostat with a digital display featuring a 'Bright Blue Display' backlight and buttons, including programming controls.
Simple 5-2 day programming with large display.
2000NC/2200NC Features:
- 5-2 Day Programming
- Bright Blue Display Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Compressor Short Cycle Protection
- Adjustable Temperature Differentials
- Programmable Extended Hold Mode
- Adaptive Recovery Mode (ARM™)
- Separate O & B Terminals
- Auxiliary Heat Status Indicator (2200NC)
- Front Access Reset Button
- Filter Check Monitor
- Low Battery Indicator
- F° / C° Switch
- Trilingual Packaging and Instructions
2000NC - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
2200NC - 2H/1C: Conventional Systems Up to 2H / 1C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
As a licensee in the Energy Aware Programmable Thermostat Program, Braeburn Systems LLC has determined that this product meets the NEMA Energy Aware efficiency specifications for programmable thermostats. Visit www.getenergyaware for more information.
Builder Series
1020NC / 1025NC / 1220NC Non-Programmable Thermostats
A white thermostat with a large, easy-to-read 2 sq. in. display featuring a 'Bright Blue Backlight' and several control buttons.
Large 2 sq. in. easy-to-read display.
1020NC/1025NC/1220NC Features:
- Large 2 Sq. In. Display with Bright Blue Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Compressor Short Cycle Protection*
- Separate O & B Terminals*
- Low Battery Indicator
- ESD Guard™ Electronic Circuitry
- Front Access Reset Button
- F° / C° Switch
- Gas / Electric Fan Switch
- Adjustable Temperature Differential
- Trilingual Packaging and Instructions
1020NC - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
1025NC - Heat Only: Conventional Heat Only Systems; 2 or 3 Wire Hydronic Zone Systems; Millivolt Systems.
1220NC - 2H/1C: Conventional Systems Up to 2H / 1C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
*Except model 1025NC.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
2020NC / 2220NC Programmable Thermostats
A white thermostat with a large, easy-to-read 2 sq. in. display featuring a 'Bright Blue Backlight' and buttons for 5-2 day programming.
Large 2 sq. in. display with simple one button 5-2 day programming.
2020NC/2220NC Features:
- 5-2 Day Programming
- Large 2 Sq. In. Display with Bright Blue Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Filter Check Monitor
- Adjustable Temperature Differential
- Adaptive Recovery Mode (ARM™)
- Low Battery Indicator
- ESD Guard™ Electronic Circuitry
- Compressor Short Cycle Protection
- Temporary Program Override
- Programmable Extended Hold Mode
- Front Access Reset Button
- F° / C° Switch
- Auxiliary Heat Status Indicator (2220NC)
- Trilingual Packaging and Instructions
2020NC - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
2220NC - 2H/1C: Conventional Systems Up to 2H / 1C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Economy Series
1020 / 1220 Non-Programmable Thermostats
A white thermostat with a large 3 sq. in. display and easy-to-use controls.
Large 3 sq. in. display with easy-to-use controls.
1020/1220 Features:
- Large 3 Sq. In. Display with Bright Blue Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Compressor Short Cycle Protection
- Adjustable Temperature Differential
- Separate O & B Terminals
- Low Battery Indicator
- ESD Guard™ Electronic Circuitry
- Front Access Reset Button
- F° / C° Switch
- Gas / Electric Fan Switch
- Trilingual Packaging and Instructions
1020 - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
1220 - 2H/2C: Conventional Systems Up to 2H / 2C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
2020 / 2220 Programmable Thermostats
A white thermostat with a large 3 sq. in. display and controls for one-button programming.
Large 3 sq. in. display with one button programming.
2020/2220 Features:
- 7 Day, 5-2 Day or Non-Programmable
- Large 3 Sq. In. Display with Bright Blue Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Filter Check Monitor
- Adaptive Recovery Mode (ARM™)
- Low Battery Indicator
- ESD Guard™ Electronic Circuitry
- Compressor Short Cycle Protection
- Temporary Program Override
- Programmable Extended Hold Mode
- Front Access Reset Button
- F° / C° Switch
- Auxiliary Heat Indicator (2220)
- Trilingual Packaging and Instructions
2020 - 1H/1C: Single Stage Conventional or Heat Pump Systems; 2 Wire Hydronic Zone Systems; Millivolt Systems.
2220 - 2H/2C: Conventional Systems Up to 2H / 2C; Heat Pump Systems with a Single Compressor and Up to One Auxiliary Stage; 2 Wire Hydronic Zone Systems; Millivolt Systems.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Premier Series
3020 / 3220 Non-Programmable Thermostats
A white thermostat with a 4 sq. in. display and a 'SpeedBar' interface for simplified setup and operation.
SpeedBar® interface simplifies setup and operation.
3020/3220 Features:
- Bright Blue Backlight
- Auto or Manual Changeover
- Speedbar® Multi-Function Button
- Indoor or Outdoor Remote Sensing
- User Selectable Service Monitors
- Separate User and Installer Reset Buttons
- Multi-Level Keypad Lockout
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Circulating Fan Mode*
- Set Point Adjustment Limits
- Auxiliary Heat Fossil Fuel Option and Adjustable Balance Points
- Trilingual Packaging and Instructions
3020 - 2H/1C*: Single Stage Conventional or Single Stage Heat Pumps with Auxiliary Heat; 2 or 3 Wire Hydronic Zone Systems; Millivolt Systems.
3220 - 3H/2C*: Conventional Systems Up to 2H / 2C; Heat Pump Systems with Up to Two Compressors and One Auxiliary Stage; 2 or 3 Wire Hydronic Zone Systems; Millivolt Systems.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Accessories Available. See Page 22.
5020 / 5220 Programmable Thermostats
A white thermostat with a 5 sq. in. display and a 'SpeedBar' interface, designed for flexible programming.
Flexible programming for residential and commercial applications.
5020/5220 Features:
- 7 Day, 5-2 Day or Non-Programmable
- Bright Blue Backlight
- Auto or Manual Changeover
- SpeedBar® Multi-Function Button
- Adjustable Temperature Limits
- Indoor or Outdoor Remote Sensing
- SpeedSet® Programming Mode
- User Selectable Service Monitors
- Hardwire or Battery Powered
- Multi-Level Keypad Lockout
- Separate User and Installer Reset Buttons
- Programmable and Circulating Fan Modes*
- Temporary Override Limits
- Residential and Commercial Modes
- Auxiliary Heat Fossil Fuel Option and Adjustable Balance Points
- Trilingual Packaging and Instructions
5020 - 2H/1C*: Single Stage Conventional or Single Stage Heat Pumps with Auxiliary Heat; 2 or 3 Wire Hydronic Zone Systems; Millivolt Systems.
5220 - 3H/2C*: Conventional Systems Up to 2H / 2C; Heat Pump Systems with Up to Two Compressors and One Auxiliary Stage; 2 or 3 Wire Hydronic Zone Systems; Millivolt Systems.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Accessories Available. See Page 22.
Premier Series Touchscreen
5310 / 5320 Touchscreen Thermostats
A white thermostat with a large, easy-to-read 6.5 sq. in. touchscreen display and 'SpeedBar' interface.
The affordable touchscreen. All the features of our deluxe touchscreen with a compact easy-to-read display.
Features:
- SpeedBar® Multi-Function Button Simplifies programming and set-up
- Large 6.5 Sq. In. Touchscreen with Oversized Characters: Easier to view and change settings
- SpeedSet® Programming Mode: Quickly program all 7 days
- Quick Reference Instruction Card: User instructions with FREE Contractor Branding
Compatibility: Compatible with Conventional and Heat Pump Systems, Up to 4H and 2C. Selectable Auto Changeover Selects Between Heating or Cooling. Bright Blue Backlight with High Intensity LED Technology. 7 Day, 5-2 Day or Non-Programmable Modes with SpeedSet®.
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Accessories Available. See Page 22.
Deluxe Series Touchscreen
6100 / 6300 / 6400 Touchscreen Thermostats
A white thermostat with a large 12 sq. in. touchscreen display and 'SpeedBar' interface, offering advanced features.
Our deluxe touchscreen thermostat.
Features:
- SpeedBar® Multi-Function Button Simplifies programming and set-up
- Large 12 Sq. In. Touchscreen with Oversized Characters: Easier to view and change settings
- SpeedSet® Programming Mode: Quickly program all 7 days
- Quick Reference Instruction Card: User instructions with FREE Contractor Branding
Compatibility: Compatible with Conventional and Heat Pump Systems, Up to 4H and 2C. Selectable Auto Changeover Selects Between Heating or Cooling. Bright Blue Backlight with High Intensity LED Technology. Non-Programmable, 5-2, 7 Day or SpeedSet® 7 Day Programming.
Additional Features:
- Adjustable Temperature Limits
- 7 Day, 5-2 Day or Non-Programmable
- Residential or Commercial Modes
- Bright Blue Backlight Display
- Separate User and Installer Reset Buttons
- Auto or Manual Changeover
- Economizer Control (6300, 6400)
- Hardwire or Battery Powered
- Auxiliary Heat Fossil Fuel Option (6300, 6400)
- Circulating Fan Mode
- Adjustable Balance Points (6300, 6400)
- Programmable Fan Mode
- Humidification and Dehumidification Control (6400)
- User Selectable Service Monitors
- Indoor or Outdoor Remote Sensing
- Trilingual Packaging and Instructions
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Accessories Available. See Page 22.
Smart Wi-Fi Universal Thermostats
7300 / 7305 / 7320 Smart Wi-Fi Thermostats
White thermostats with LCD displays, soft-touch buttons, and Wi-Fi connectivity, enabling remote access.
Affordable Smart Wi-Fi Solution: Universal 7 Day, 5-2 Day or Non-Programmable with 5" LCD display, soft-touch buttons and patented SpeedBar® technology. Allows for a cost-effective Smart Wi-Fi solution for any residential or commercial application.
7300: 1H/1C Conventional or Heat Pump.
7305: 3H/2C Heat Pump or 2H/2C Conventional.
Flexible Smart Wi-Fi Solution: Universal 7 Day, 5-2 Day or Non-Programmable with high resolution 6.5" Touchscreen display and patented SpeedBar® technology. Unique wireless capabilities allow the addition of BlueLink wireless indoor, outdoor or humidity sensors for flexible system control and Smart Wi-Fi connectivity on any residential or commercial application.
7320: 3H/2C Heat Pump or 2H/2C Conventional.
Common Features and Benefits:
- 7 Day, 5-2 Day or Non-Programmable
- Residential or Commercial Modes
- Auto or Manual Changeover
- Bright Blue Backlight Display
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Programmable and Circulating Fan Modes
- Wired Remote Sensor Capability
- Auxiliary Heat Fossil Fuel Option (7305, 7320)
- Heat Pump Balance Points (7305, 7320)
- Auxiliary “A” Terminal for Economizer, Fresh Air or Output Control (7305, 7320)
- Wireless Remote Sensor Capability-Indoor, Outdoor or Humidity (7320)
- "C" Common Wire Required for Wi-Fi Operation
FREE Color Contractor Branding on Quick Reference Instruction Card. See page 23.
Compatible Remote Sensors
For 7300 / 7305 / 7320:
- Wired Remote Sensors: 5390 Wired Indoor Sensor, 5490 Wired Outdoor Sensor. A maximum of 1 wired remote sensor can be connected.
For 7320:
- Wireless Remote Sensors: 7390 Wireless Indoor Sensor (4 max), 7490 Wireless Outdoor Sensor (1 max), 7330 Wireless Humidity Sensor (1 max). A maximum of 4 wireless sensors can be connected.
- Wired Remote Sensors: 5390 Wired Indoor Sensor (1 max), 5490 Wired Outdoor Sensor (1 max).
See pages 20 and 22 for more information.
BlueLink Smart Connect App
Description of the BlueLink Smart Connect App features, including remote control, setpoint adjustment, HOLD feature, outdoor temperature viewing, multi-thermostat control, and easy home screen access for system and fan settings, as well as program viewing/modification. Includes descriptions of Multi-Color Program Groups with QuickEdit™, QuickCopy™ Function, Service & Temp Alerts, and Dealer Information.
Universal Wireless Thermostat Kit
7500 Universal Wireless Thermostat Kit
A white thermostat with an LCD display and buttons, paired with a separate wireless control module.
Complete Kit to Add or Relocate a Thermostat.
Thermostat Features:
- 7 Day, 5-2 Day or Non-Programmable
- Large 5 Sq. In. Backlit Display
- Auto or Manual Changeover
- Residential or Commercial Modes
- Battery Operated for Total Installation Flexibility
- Compatible with 2 or 3 Wire Hydronic Zone Systems
- Adjustable Balance Points
- Auxiliary Heat Fossil Fuel Option
- Programmable Fan Control
- R and C Terminals for Optional 24 Volt Operation
- Adjustable Temperature Limits
- Multi-Level Keypad Lockout
- Quick Reference Instruction Card
Wireless Features:
- Superior Wireless Range
- Battery Life Exceeds Virtually All Competitive Models
- Includes Return Air Sensor for Default Temperature Control Even if Batteries are Drained
- Connect up to 4 Optional Wireless Indoor Sensors for Remote Temperature Sensing*
- Optional Wireless Outdoor Sensing for Outdoor Temperature Display or Balance Point Control*
- Optional Wireless Humidity Plenum Sensor for Whole-House Humidification Control*
- Affordable Solution for Most Thermostat Applications
Accessories Available. See Pages 20, 22.
Wireless Remote Sensors and Accessories
Wireless Remote Sensors
Small white sensor units: 7390 Indoor Sensor, 7490 Outdoor Sensor, 7330 Humidity Sensor.
7390 Wireless Remote Indoor Sensor: Sense temperature at remote location or combine with thermostat; Up to 4 wireless remote indoor sensors can be connected*; Front LED light shows sensor status; Requires 2 "AA" Alkaline batteries (included).
7490 Wireless Remote Outdoor Sensor: Display outdoor temperature; Use for heat pump balance point control; 1 wireless remote outdoor sensor can be connected*; Requires 2 "AA" Lithium batteries (included).
7330 Wireless Remote Humidity Sensor: Controls humidifier or dehumidifier; Mounts directly to return air plenum; 1 wireless remote humidity sensor can be connected*; 24 VAC Powered.
7340 Share-a-Wire™ Module: For use with BlueLink Smart Connect™ Wi-Fi Thermostats; Provides a common "c wire" connection on a 4 wire system.
*A maximum of 4 wireless sensors can be connected.
Accessories
Contractors! Buy a 3020, 3220, 5020, 5220, 5310, 5320, 6100, 6300 or 6400 thermostat and get a FREE thermostat guard or wired remote sensor.*
5390 Remote Indoor Sensor
Contemporary Style for Any Decor; For Use with Compatible Braeburn Thermostats; Sense Range of 40° to 99°F.
5490 Remote Outdoor Sensor
Mounts Outdoors up to 200 Feet Away; Auto Detected by Braeburn Thermostats; Enables Outdoor Control Functions on Compatible Braeburn Thermostats; Sense Range of -40° to 120°F.
5970 Universal Thermostat Guard
Universal-Fits Virtually All Thermostats; Replaces Over 100 Competitive Models; Tamper Resistant Design; For New and Existing Thermostat Applications; Slim Contemporary Style; Strong Durable Clear Plastic; Two Keys Included; Fits thermostats up to 7.3"W x 5.25"H x 1.8"D.
165 Construction Thermostat
Install in Place of Standard 24 Volt AC Thermostat During Construction; Maintains Fixed Temperature Set Point of 65° Heat; Tamper-proof Design Prevents Temperature Adjustment; Sturdy Enclosure Protects Switch from Drywall Dust, Paint and Mudding.
2920 Vertical Wall Plate
Adapts Vertical J Box to Horizontal Mount; Sturdy Two Piece Construction; 6.5"W x 5 1/8"H.
2950 Universal Wall Plate
Covers Mounting Marks from Old Thermostats; Use with All Braeburn Digital Thermostats; 6.5"W x 6.5"H.
Contractor Branding
Send us your color logo and we'll promote your brand for FREE. With Braeburn, there are no minimum purchase requirements for contractors to advertise 24 hours a day in customers' homes. Your logo and contact information will be readily available when it is time for maintenance or equipment repair.
Non-branded Quick Reference cards are already included with thermostats. For custom branded cards, send your logo and receive custom printed cards absolutely FREE.
Easy Ordering:
- FREE Quick Reference Cards with Color Logo: Visit www.braeburnonline.com/contractor-branding. Upload high resolution logo in TIF, JPG or EPS format. Receive 48 full color Contractor Branded Quick Reference Cards for FREE, with no set-up fees or branding charges. Please allow 2-3 weeks for delivery.
- FREE Battery Doors or Labels: Visit www.braeburnonline.com/contractor-branding. Provide 3 lines of text (no logos), 30 characters per line. Receive 48 doors or labels for FREE, with no set-up fees or branding charges. Please allow 2-3 weeks for delivery.
Zoning Systems
Residential 2 Zone Control Panel
140202 - 2H / 1C
A white, compact 6" x 6" rectangular control panel with terminal blocks and status LEDs.
140202/140303 Features:
- Works with Conventional 4 or 5 Wire Thermostats
- Works with BlueLink™ Wireless Technology*
- Installs on Conventional, Heat Pump, Electric and Dual Fuel Systems
- Compact Housing for Stud or Plenum Mounting
- Multiple Wiring Exit and Wiring Knockouts
- Heavy Duty Damper Relays for Long Life
- Power and Damper Status LED's for Quick Diagnosis
- Selectable Priority for One Zone or All Zones
- Requires Dedicated 40 VA, 24 VAC Transformer
- Can be used with Virtually All Low Voltage Dampers from Other Manufacturers
- 30 VA Damper Capacity
Residential 3 Zone Control Panel
140303 - 3H / 2C
A white, compact 8" x 8" rectangular control panel with terminal blocks, an LED display, and status indicators.
Compatibility: Controls conventional, heat pump, electric, and dual fuel systems. Use with conventional 4 or 5 wire thermostats. Features Emergency Heat Switch and Power Terminals.
Expandable 4 Zone Control Panel
140404 - 4H / 2C
A white, compact 8" x 10" rectangular control panel with a large 5.5 sq. in. backlit display, easy setup buttons, and various terminal connections.
Features:
- Expandable Up to 32 Zones
- Compatible with Electric, Gas, Oil and Heat Pump Equipment-Including Dual Fuel
- Can be used with Virtually All Low-Voltage Thermostats and Dampers from other Manufacturers
- Compatible with BlueLink™ Wireless Technology*
- Dual Fuel Operation with Braeburn Outdoor Sensor
- Push-In Terminals for Easy Wiring-No Screwdriver Needed
- Flexible Staging Controlled by Panel or Thermostat
- Built In Test Mode: Test all dampers and equipment from main panel.
- Flexible Thermostat Options: Works with virtually any low voltage heat pump or conventional thermostat.
- Outdoor Sensor Terminals: Connect to Braeburn outdoor sensor for heat pump balance point control.
- Professional Appearance: Wire along side and underneath with multiple wire tie points.
2 Zone Expander Control Panel
140424 - 4H / 2C
A white, compact 8" x 5" rectangular control panel designed to stack neatly with the main panel, featuring push-in terminals and LED indicators.
Features:
- Add Zones in Affordable 2 Zone Increments
- Compact 8" x 5" Foot Print Stacks Neatly with Main Panel
- Add Up to 28 Additional Zones (32 total)
- Can be used with Virtually All Low-Voltage Thermostats and Dampers from other Manufacturers
- Push-In Terminals for Easy Wiring-No Screw Driver Needed
- Easy Setup and Configuration
- LED's Show All Calls and Damper Status at a Glance
- Installs Up to 500 ft. from Main Panel
Zone Dampers
Round Zone Dampers: Available in Power Open / Power Close (24 VAC, 3-wire) and Spring Return (24 VAC, 2-wire) configurations. Various diameters and lengths are specified in tables.
Rectangular Zone Dampers: Available in Power Open / Power Close and Power Close / Spring Return configurations. Available in various widths and heights, specified in tables. Also includes Rectangular Static Bypass dampers.
Zoning Systems Accessories
Braeburn Zoning Accessories are designed for years of performance in demanding zoning applications.
149020 Static Pressure Control: Mounts on vertical surfaces, powered from the zone panel transformer. Automatically controls the plenum bypass damper by monitoring system pressure.
149040 Zoning System Transformer: Provides 120 VAC input and 24 VAC output. UL listed with convenient mounting features.
Emergency Heat Switch Kit: Available as lighted rocker switch (149090) or standard switch (149091). Includes engraved wall plate and handy box.
Replacement Parts: Includes Syncron Motors, Damper Motors, Supply Air Sensors, and Barometric Bypass Damper components.
Braeburn Products
Welcome! Braeburn is the value alternative for a wide variety of indoor air quality control products. Founded in 2001, Braeburn's corporate headquarters is located in Montgomery, Illinois. The company is committed to providing precision products, with manufacturing facilities ISO 9001 and QS9000 rated. Braeburn provides solutions to lower energy costs and increase comfort. Innovative features, reliability, and contemporary designs make Braeburn the brighter choice in thermostats, air filtration products, humidification, and zoning.
We support the Energy Aware Program. Visit www.getenergyaware.com.
Contact Information:
- Toll-Free: 866.268.5599 (U.S.)
- International: +1.630.844.1968
- Fax: 866.268.8897
- Website: www.braeburnonline.com
Braeburn Systems LLC, 2215 Cornell Avenue, Montgomery, IL 60538.