Installation Guide for partech models including: OxyTechw2 RDO Pro-X Dissolved Oxygen Sensor WaterWatch2 Monitors, OxyTechw2 RDO, Pro-X Dissolved Oxygen Sensor WaterWatch2 Monitors, Oxygen Sensor WaterWatch2 Monitors, Sensor WaterWatch2 Monitors, WaterWatch2 Monitors

Manual

Partech OxyTechw² Rugged Dissolved Oxygen Sensor, RDO, P230470 | USABlueBook.com

Partech OxyTechw² Rugged Dissolved Oxygen Sensor, RDO, P230469 | USABlueBook.com

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 3 Pages, 1.41MB

OxyTechw2 RDO Sensor

General Info
The.RDO.sensor.measures.dissolved.oxygen.and.temperature.in .a.variety.of.applications.
Partech's.RDO.sensor.is.rugged.and.accurate..The.stainless.steel housing.provides.corrosion resistance..A.replaceable.sensor.cap.ensures.quality.data..

STANDARD SENSORS

DIMENSIONS

WEIGHT

OxyTechw² RDO Sensor

203 mm (7.9") long x 47 mm (1.8") diameter

0.8 kg (1.76 lbs) inc 5m of cable

ACCURACY

RANGE

CABLE LENGTH

±0.1 mg/l
(0-20 mg/l) ±2% (20-60 mg/l)

0-60 mg/l; 0-600% Saturation -5°C to 50°C (23°F to 122°F)

5 or 10 metres standard

SERVICE REQUIREMENT
No routine servicing

RDO Sensor - Maintenance
How to Replace the RDO Cap
Old cap

New cap

The monitor displays
a.warning.when.the. sensor cap is close to
expiration.

Remove the nose cone from the probe.

Pull the RDO cap away from the probe.

Align.the.flat.edge.on. the tip of the probe
with.the.flat.edge. inside the cap. Slide
the cap in place.

1-970-498-1500

1

www.in-situ.com

RDO Sensor - Programming
Using the Salinity Settings

Select Sensor Config from the main menu and press OK.

Choose Set Salinity and press OK.

Setting Barometric Pressure

Select the appropriate Use.the.arrow.keys.to.

default or choose User set the value. Press OK

Defined. Press OK.

when.finished.

Select Sensor Config from the main menu and press OK.

Select Set Baro Pressure and press OK.

Restoring Default Settings

Use.the.arrow.keys.to. set the value and press
OK.when.finished.

Select Sensor Config from the main menu and press OK.

Choose Restore

The monitor displays

Defaults and press OK. sensor info. Press OK.

When the restore is complete,.press.OK.

1-970-498-1500

2

www.in-situ.com

RDO Sensor - Calibration

1-970-498-1500

3

www.in-situ.com



References

• Water Monitoring Equipment, Water Quality Testing, & More | In-Situ