Yealink W90 DECT IP Multi-Cell System User Guide

User Guide for Yealink models including: W90, T2C-W90, T2CW90, W90, DECT IP Multi-Cell System

User Manual

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. W90 DECT IP Multi-Cell Base Station T2C-W90 T2CW90 w90

W90 DECT IP Multi-Cell System

File Info : application/pdf, 4 Pages, 1.64MB

W90-Users-Manual-YEALINK-XIAMEN-NETWORK-t2c-w90-ex-1-10

http://support.yealink.com/
W90 DECT IP Multi-Cell System
Quick Start Guide (V85.16)
For W90DM/W90B firmware 130.85.0.15 or later For W59R firmware 115.85.0.20 or later For W53H firmware 88.85.0.20 or later For W56H firmware 61.85.0.20 or later
For CP930W firmware 87.85.0.20 or later For DD phone firmware 66.85.0.15 or later

Package Contents

+2 +2

Quick Start Guide

Installation
1. Connect the power and the network. a. AC Power Option

100mm

Label SN/MAC/RFPI

DC5V

Internet

Optional

Label SN/MAC/RFPI

DC5V

Internet

DC5V

Internet

b. PoE (Power over Ethernet) Option

IEEE 802.3af compliant

100mm

DC5V

Internet

Note: · If you choose method a, use Yealink supplied power adapter (5V/1.2A).
A third-party power adapter may damage the device. · If you choose method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.

2. Mount W90DM/W90B on the wall.

Max:4.5mm (0.177")

30 mm 25 mm

Max:3mm (0.118")

Max:8mm (0.315")
Min:6.5mm (0.256")

Label SN/MAC/RFPI

100mm

3. Adjust the antenna angle.

180° 90°

Defining the Device Role
The W90DM is shipped as a DECT Manager (DM) and the W90B is shipped as a base station.

Base Mode Options The following shows the LED status after the W90DM/W90B connects to the power and network:

Base Mode Option 1 2

Role
Base DM

LAN LED
Green Green

ROLE LED
Green Orange

DECT LED
Off Off

Accessing the Web User Interface
1. Do one of the following: · Find the current IP address of the device on the DHCP server in the list of registered DHCP clients. · Find the current IP address of the device through a PC scanning tool - Yealink Discovery Tool.
2. Open a web browser on your computer, enter the IP address into the address bar (for example, "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Login.

Regulatory Notices

Troubleshooting

Operating Ambient Temperatures ·Operating temperature: -4 to 122°F (-20 to 50°C) ·Relative humidity: 5% to 90%, noncondensing ·Storage temperature: -22 to +160°F (-30 to +70°C) Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product. Explanation of the symbols DC symbol
is the DC voltage symbol. WEEE Warning symbol

The unit cannot supply power to device other than Yealink device. There is a bad connection with the plug. 1. Clean the plug with a dry cloth. 2. Connect it to another wall outlet. The usage environment is out of operating temperature range. 1. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly. You cannot connect the cable properly. 1. You may have connected a wrong Yealink device. 2. Use the correct power supply. Some dust, etc., may be in the port. 1. Clean the port. Contact your dealer or authorized service facility for any further questions.

To avoid the potential effects on the environment and human health as a result of the FCC Statement

presence of hazardous substances in electrical and electronic equipment, end users of This device complies with part 15 of the FCC Rules. Operation is subject to the

electrical and electronic equipment should understand the meaning of the crossed-out following two conditions: (1) this device may not cause harmful interference, and (2)

wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have this device must accept any interference received, including interference that may

to collect such WEEE separately.

cause undesired operation. Any Changes or modifications not expressly approved

Restriction of Hazardous Substances Directive (RoHS)

by the party responsible for compliance could void the user's authority to operate

This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com.

the equipment. IMPORTANT NOTE:

Safety Instructions

Note: This equipment has been tested and found to comply with the limits for a Class B

Save these instructions. Read these safety instructions before use!

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

General Requirements ·Before you install and use the device, read the safety instructions carefully and observe
the situation during operation.

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

·During the process of storage, transportation, and operation, please always keep the

communications. However, there is no guarantee that interference will not occur in a

device dry and clean,avoid collision and crash.

particular installation. If this equipment does cause harmful interference to radio or

·Please attempt not to dismantle the device by yourself. In case of any discrepancy, please television reception, which can be determined by turning the equipment off and on, the user

contact the appointed maintenance center for repair.

is encouraged to try to correct the interference by one or more of the following measures:

·Please refer to the relevant laws and statutes while using the device. Legal rights of others --Reorient or relocate the receiving antenna.

should be respected as well.

--Increase the separation between the equipment and receiver.

Environmental Requirements

--Connect the equipment into an outlet on a circuit different from that to which the receiver

·Place the device at a well-ventilated place. Do not expose the device under direct sunlight. is connected.

·Keep the device dry and free of dusts.

--Consult the dealer or an experienced radio/TV technician for help.

·Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials. ·Keep the device away from any heat source or bare fire, such as a candle or an electric
heater.

IC Statement This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:

Operating Requirements

(1) this device may not cause interference; and

·Do not let a child operate the device without guidance.

(2) this device must accept any interference, including interference that may cause

·Do not let a child play with the device or any accessory in case of accidental swallowing. undesired operation of the device. CAN ICES-3(B)

·Please use the accessories provided or authorized by the manufacturer only.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

·The power supply of the device shall meet the requirements of the input voltage of the

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

device. Please use the provided surge protection power socket only.

suivantes :

·Before plugging or unplugging any cable, make sure that your hands are completely dry. (1) l'appareil ne doit pas produire de brouillage;

·Do not spill liquid of any kind on the product or use the equipment near water, for

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si

example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool. le brouillage est susceptible d'en compromettre le fonctionnement.NMB-3(B)

·During a thunderstorm, stop using the device and disconnect it from the power supply.

Radiation Exposure Statement

Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the This equipment complies with FCC and IC radiation exposure limits set forth for an

radio frequency cable) to avoid lightning strike.

uncontrolled environment. This equipment should be installed and operated with

·During a thunderstorm, stop using the device and disconnect it from the power supply.

minimum distance 20cm between the radiator and your body.

Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune

radio frequency cable) to avoid lightning strike.

autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une

·If the device is left unused for a rather long time, disconnect it from the power supply and distance minimum de 20 centimètres entre le radiateur et votre corps.

unplug the power plug.

Contact Information

·When there is smoke emitted from the device, or some abnormal noise or smell,

YEALINK NETWORK TECHNOLOGY CO.,LTD.

disconnect the device from the power supply, and unplug the power plug immediately.

309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

·Contact the specified maintenance center for repair. ·Do not insert any object into equipment slots that is not part of the product or auxiliary product. ·Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China

Cleaning Requirements ·Before cleaning the device, disconnect it from the power supply.
·Use a piece of soft, dry and anti-static cloth to clean the device.
·Keep the power plug clean and dry.

430104001470

References

Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)