Introduction
The PowMr POW-SunSmart 8K and 10K series are advanced all-in-one solar charge inverters designed for efficient solar energy storage and management. Integrating solar energy harvesting, utility charging, and energy storage capabilities, these inverters provide a reliable AC sine wave output. They are built with DSP control for high response speed, robust reliability, and industrial standards, making them suitable for various solar power systems.
Key Features
- Supports both lead-acid and Li-ion battery connections.
- Dual MPPT technology with high efficiency for optimal solar energy capture.
- Flexible output modes including split-phase and single-phase, with configurable voltage levels (100-120Vac).
- Multiple charging modes: solar only, mains priority, solar priority, and hybrid charging.
- Advanced functions like time-slot charging/discharging and energy-saving mode.
- Comprehensive 360° protection features against short circuits, overloads, over/under voltage, and over-temperature.
- Communication capabilities via CAN, USB, and RS485 ports for system monitoring and control.
Safety and Installation
Important Safety Instructions: This manual contains critical safety information that must be followed during installation and maintenance to prevent hazards such as electric shock and serious injury. Always comply with local electrical codes and ensure installation is performed by a certified technician. Proper ventilation and handling of batteries are essential.
Installation involves selecting a suitable mounting location, securely mounting the inverter, and correctly connecting PV modules, batteries, and AC loads according to the provided diagrams and specifications.
Operation and Monitoring
The inverter features an LCD screen and indicator lights for real-time system status monitoring. Users can configure various parameters, including charging modes, output settings, and time slots, via the intuitive interface to optimize energy usage and cost savings.
Technical Specifications Overview
The POW-SunSmart 8K offers 8,000W rated output power, while the 10K model provides 10,000W. Both support a wide DC input voltage range (40-60Vdc for battery, up to 500Vdc for PV) and offer high MPPT tracking efficiency (99.9%). They are designed for indoor use (IP20) and operate within an ambient temperature range of -15°C to 55°C.
