Installation Guide for tp-link models including: DS-PMA-Combo C, DS-PMA-C, DS-PMA-C, DS-PMA Combo Class Module, DS-PMA, Combo Class Module, Class Module, Module

Installation Guide - TP-Link

7 nov 2024 — Note: 1. Do not touch the output pins on the transceiver with your hand. 2. Always keep the protective dust plug on the transceiver's optical bores until ...

DS-PMA-Combo C (UN) V1 Installation Guide

Download for DS-PMA-Combo C | TP-Link Malaysia

Download for DS-PMA-Combo C | TP-Link

PDF preview unavailable. Download the PDF instead.

7106511158 DS-PMA-C IG
©2024 TP-Link 7106511158 REV1.2.0

Installation Guide
SFP XGSPON&GPON Combo Class C+ Module SFP GPON Class C++ Module SFP GPON Class C+ Module
* Images may differ from actual products.
Install the Transceiver
1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Insert the transceiver into the slot and firmly press it into place.

For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
Remove the Transceiver
1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Disconnect the network fiber-optic cable from the transceiver.

3. Remove the protective dust plug from the transceiver.

3. Pull the safety latch downwards to release the transceiver, and then pull it out from the slot.

4. Plug a fiber-optic cable into the transceiver. Note that the transceiver works without any additional configuration.

4. Reinstall the protective dust plug in the transceiver's optical bores and place it on antistatic mat or a static shielding bag.

Note: 1. Do not touch the output pins on the transceiver with your hand. 2. Always keep the protective dust plug on the transceiver's optical bores until you are ready to make a connection.
Caution: DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

Connection

OLT PON Port

DS-PMA-Combo C+ or DS-PMA-C++ or DS-PMA-C+
Fiber

ONU

Specifications

General Specifications

Normal Wave Length
Standards and Protocols Cable Fiber Type Max. Cable Length Data Rate
Tx Power
Port Type Power Support Safety & Emission
DDM SFP-MSA Hot Swappable

DS-PMA-Combo C+

XGS-PON: Tx: 1577 nm, Rx: 1270 nm

XG-PON: Tx: 1577 nm, Rx: 1270 nm

GPON:

Tx: 1490 nm, Rx: 1310 nm

ITU-T G.984.2 Amendment 2

Single-mode Fiber

9/125 um Single-mode

20 km

XGS-PON: Tx: 9953 Mbit/s, Rx: 9953 Mbit/s

XG-PON: Tx: 9953 Mbit/s, Rx: 2488 Mbit/s

GPON:

Tx: 2488 Mbit/s, Rx: 1244 Mbit/s

XGS-PON: +5 dBm ~ +8 dBm

GPON:

+3 dBm ~ +7 dBm

Combo PON, SC

3.3 V

FCC 47 CFR Part 15, Class B CE, Class B

Yes

Yes

Yes

DS-PMA-C++ GPON: Tx: 1490 nm, Rx: 1310 nm
ITU-T G.984.2 Amendment 2 Single-mode Fiber 9/125 um Single-mode 20 km GPON: Tx: 2488 Mbit/s, Rx: 1244 Mbit/s
GPON: +5 dBm ~ +10 dBm
GPON SFP, SC/UPC 3.3 V FCC 47 CFR Part 15, Class B CE, Class B Yes Yes Yes

DS-PMA-C+ GPON: Tx: 1490 nm, Rx: 1310 nm
ITU-T G.984.2 Amendment 2 Single-mode Fiber 9/125 um Single-mode 20 km GPON: Tx: 2488 Mbit/s, Rx: 1244 Mbit/s
GPON: +3 dBm ~ +7 dBm
GPON SFP, SC/UPC 3.3 V FCC 47 CFR Part 15, Class B CE, Class B Yes Yes Yes

Safety Information
Keep the device away from water, fire, humidity or hot environments. Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. Do not attempt to disassemble, repair, or modify the device. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
UKCA Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/


Adobe PDF library 15.00