ZEB-VIGOR 200 Trolley DJ Speaker

Introduction

Thank you for purchasing the "ZEB-VIGOR 200" Trolley DJ Speaker. Please read this user manual carefully before operation and save it for future reference.

Important Notes:

• ⚠️ Avoid the use of this product in high-temperature and high-humidity environments.
• ⚠️ Avoid self-disassembling the product, as it will result in voiding the product's warranty.
• For more information about the terms and conditions for the warranty policy, please visit https://zebronics.com/pages/warranty-policy.

Features

• Triple Full Range 20.32cm drivers
• TWS (True Wireless Stereo) Function
• Karaoke & Mic Recording Function
• Dual Wireless MIC support
• Multiconnectivity: BT v5.0, USB, mSD, AUX, FM
• Dual 6.3mm Microphone inputs
• LED Display
• RGB Lights
• Dedicated Control Buttons
• Remote control
• Carry Handle & Wheels
• Built-in Rechargeable Battery

Specifications

Package Contents

• Speaker: 1 Unit
• Remote Control: 1 Unit
• Wireless MIC: 2 Units
• Power Cord: 1 Unit
• Input cable: 1 Unit
• QR Code Guide: 1 Unit (Note: QR codes are excluded from this HTML document)

Product Description & Controls

Control Panel Description

The control panel is located on the top of the speaker and includes the following controls:

1. POWER SWITCH: Turns the speaker on/off. ⚡
2. MIC INPUT 1: 6.3mm input for microphone 1. ?
3. mSD CARD SLOT: Slot for mSD cards. ?️
4. USB PORT: Port for USB flash drives. ?
5. AUX PORT: 3.5mm auxiliary input. ?
6. LED INDICATOR: Displays charging status and other indicators. ?
7. MIC INPUT 2: 6.3mm input for microphone 2. ?
8. LED CONTROL SWITCH: Controls the RGB lighting effects. ?
9. VOLUME DOWN BUTTON: Decreases the master volume. ?
10. VOLUME UP BUTTON: Increases the master volume. ?
11. MODE: Cycles through input sources (BT, USB, mSD, FM, AUX). ?
12. PREVIOUS: Skips to the previous track or FM station. ◀️
13. PLAY/PAUSE/TWS/SCAN: Plays/pauses audio, initiates TWS pairing, or scans FM channels. ⏯️ / ? / ?
14. NEXT: Skips to the next track or FM station. ▶️
15. ECHO: Adjusts the echo effect for microphones. ?️
16. MIC VOLUME: Adjusts the volume for connected microphones. ??
17. BASS CONTROL: Adjusts the bass level. ?️
18. TREBLE CONTROL: Adjusts the treble level. ?️

Remote Control Description

The remote control provides access to all speaker functions:

1. POWER BUTTON: Turns the speaker on/off. ⚡
2. BASS +: Increases bass level. ?️
3. TREBLE +: Increases treble level. ?️
4. BASS -: Decreases bass level. ?️
5. TREBLE -: Decreases treble level. ?️
6. MODE: Cycles through input sources. ?
7. VOL +: Increases master volume. ?
8. PREVIOUS: Skips to the previous track or FM station. ◀️
9. RECORDING: Starts/stops audio recording from microphones. REC
10. REPEAT: Repeats the current track or all tracks. ?
11. MUTE/UNMUTE: Mutes or unmutes the audio output. ?
12. MIC +: Increases microphone volume. ??
13. ECHO +: Increases echo effect level. ?️
14. MIC -: Decreases microphone volume. ??
15. ECHO -: Decreases echo effect level. ?️
16. EQ: Selects equalizer presets. ?️
17. NEXT: Skips to the next track or FM station. ▶️
18. PLAY/PAUSE/SCAN: Plays/pauses audio or scans FM channels. ⏯️ / ?
19. VOL -: Decreases master volume. ?
20. REC PLAY: Plays back recorded audio. ▶️ REC
21. MIC PRIORITY: Reduces music volume when microphone is used. ??
22. NUMERIC BUTTONS (0-9): Select tracks or FM stations by number. 0-9

General Instructions

BT Connectivity

• Switch the source to BT mode using the MODE button. ?
• Turn on Bluetooth on your mobile device and scan for nearby BT devices.
• Tap on "ZEB-VIGOR 200" to connect.

USB/mSD Mode

• Insert a USB flash drive or mSD card into the provided slot. ? / ?️
• The speaker will automatically detect the USB/mSD card and play supported audio content (MP3 format).
• Note: This mode is only selectable when a USB/SD flash card is connected.

FM Radio

• Switch the speaker to FM mode using the MODE button. ?
• Long press the PLAY/PAUSE/SCAN button (button 13 on the speaker, button 18 on the remote) to scan for available FM channels. ?
• Once scanning is complete, the first scanned channel will start playing.

AUX-IN

• Connect an audio source to the speaker using a 3.5mm audio cable. ?
• Connect one end of the cable to the AUX-IN port on the speaker and the other end to the audio output of your source device.
• Audio from the source device can now be played through the speaker.

TWS Function

• Turn on two "ZEB-VIGOR 200" speakers and ensure they are both in BT mode. ?
• On one of the speakers, press and hold the PLAY/PAUSE/TWS/SCAN button (button 13) for 3-5 seconds to initiate TWS pairing. ?
• After a few seconds, both speakers should connect successfully.
• Now, search for nearby BT devices on your mobile phone or other source device and tap on "ZEB-VIGOR 200" to connect.
• To exit TWS mode, press and hold the PLAY/PAUSE/TWS/SCAN button for 3-5 seconds on either speaker.

Recording Function

• To record microphone input, first plug in a USB/mSD card into the speaker, which will act as a storage device. ? / ?️
• Press the RECORDING button (button 9 on the remote) to start/stop recording. REC
• After recording voice through the microphone, press the REC PLAY button (button 20 on the remote) to play the recorded file. ▶️ REC

Charging Instruction

• Connect the included power cord to the speaker and plug the other end into a 230V power supply. ?
• Charging Indication: The Red LED on the top panel of the speaker will glow, and charging indication will be displayed on the speaker's LED Display. ?