Instruction Manual for Shenzhen Xingchang Technology models including: V5, 2A5ZJ-V5, 2A5ZJV5, V5 Wireless Recording Microphone, V5, Wireless Recording Microphone
Shenzhen Xingchang Technology Co. Ltd V5 Wirelesslavalier microphone 2A5ZJ-V5 2A5ZJV5 v5
Instruction manual Wireless recording microphone Product introduction Thank you for purchasing our product. The product is smart wireless recording microphone that can provide professional recording live streaming output. It is plug-and-play type, which requires no APP. Multiple purposes: Network broadcast, Vlog shooting, program interview, interview recording and video teaching. Wireless Bluetooth Vlong live broadcast Wireless Bluetooth Vlong live broadcast Indicator Charging Function introduction Function introduction of receiver Indicator Charging Indicator Charging On/Off key: Hold the key to turn it on/off. Indicator light: Slow flicker: Fail to connect with the emitter successfully On: Successfully pair with emitter Rapid flicker: low battery Charging indicator light: The red light will be on while charging and will be off once it is fully charged. Charging port/recording output port Auxiliary wheat: flashing indicates that the auxiliary wheat is not connected, and always on indicates that the auxiliary wheat has been connected successfully. Function introduction of emitter Wireless Bluetooth Vlong live broadcast Wireless Bluetooth Vlong live broadcast Radio microphone: This part should aim to the mouth torecord the voice. On/Off/mode switch: Hold the key to turn on/off and press it to switch the mode. Microphone volume +: press once and the microphone volume will increase one level Microphone volume -: press once and the microphone volume will decrease one level Charging indicator light: The red light will be on while charging and will be off once it is fully charged. Battery status indicator light: When the battery is full, two indicator lights will be on at the same time, when the battery is less than 40%, indicating that battery is low and when the battery is too low, one light will flicker. Emitter light: It will be on once it turns on and it will be off when it turns off. Bluetooth light: It flickers when the Bluetooth is not connected and will be on once Bluetooth is connected (Bluetooth serves as the external sound source for playing music and will not serve as a recorder). Mode area: There are two modes are available, which are, On/off and mode switch. Vlong mode: It is applicable to shoot short video and original voice broadcast. The voice is clear, clean and free from reverberation. Under this mode, the music cannot be played out through Bluetooth. Live streaming mode: It is applicable for live streaming sing. It comes with reverberation and the music can be played out through Bluetooth. Charging port: monitor earphone port Note: The default is Vlog mode for the first start of emitter and it has memory function for the second time. How to use (1) How to connect to cellphone for voice/video recording. Step one: Firstly, hold On/off button on receiver and emitter to have them paired successfully, Step two: Connect the receiver with cellphone through cable Step three: Switch to the Vlog mode of the emitter (the default mode for the first start is Vlog mode) and turn the camera App in the phone to start recording voice and video. (2) How to conduct live streaming through cellphone Step one: Firstly, hold On/off button on receiver and emitter to have them paired successfully, Step two: Connect the receiver with cellphone through cable Step three: Switch to the live streaming mode of the emitter and use the Bluetooth on the other cellphone to play music for live streaming. Open the live streaming App in the phone to start. (3) How to record voice/video by connecting camera Step one: Firstly, hold On/off button on receiver and emitter to have them paired successfully, Step two: Connect the receiver with camera through camera line Step three: Switch to the Vlog mode of the emitter (the default mode for the first start is Vlog mode) and turn the camera App in the phone to start recording voice and video. Product parameter Direction type: All directions Frequency range: 2.4G Range of frequency response: 30Hz~18KHz Transmission distance: 15m SNR: 90DB Battery capacity: 500Ah/3.7V Charging port: Type-c Rated input: DC5V=500mA Standard charging time: About 1 hour Working hours:4-6 hours Overall dimension (main device): 44X44X23mm Working temperature: -10°¥~45¥ Storage temperature: -20°C~60¥ Packing list Contents of packing list (1 Emitter (2 Receiver (3)Instruction manual (4 Charging line *1, camera line *1, cellphone cable*1 (5)Storage box (6)Packing box Manufacturer information Product name: Wireless recording microphone Product model: V5 matters need attention 1. Please disconnect the charger and turn it off before cleaning the machine. 2. Non-professionals should not disassemble the equipment by themselves to avoid machine failure and loss of warranty rights. 3. Do not place the equipment in the direct sunlight to avoid premature aging of electronic parts. 4. Avoid using in dusty or dirty places (dust can easily cause equipment failure). 5. Please do not place the equipment in a supercooled or overheated environment,which may cause the equipment to fail to operate normally. 6. It is recommended that the set ambient temperature should not exceed -10C-40¥and the relative temperature should be 10%-95% c. 7. Please don't put anything into the equipment to avoid short circuit of parts or circuit damage. Please don't spill any liquid on the product. 8. Avoid the friction and impact between the machine and hard objects, so as to avoid scratching or falling off the surface or damage to other hardware. 9. The product shall not be exposed to overheating environment such as sunshine, fire or the like. 10. The manual contains important information, so please keep it. Warranty policy Warranty range: For damage not caused by human, the device can be replaced within one month and can be provided with free maintenance within one year. Limited maintenance is available within three years. Warranty card Product model Date of purchasing Retailer Maintenance record Customer name Contact phone Contact address CERTIFICATE OF QUALITY Product model Inspector Date of inspection Note: The products of the company will be updated continuously, further notice may not be made for any change.Adobe PDF library 15.00