anko 42661054 Bluetooth CD Sound System User Manual

User Manual for anko models including: 42661054, 42661054 Bluetooth CD Sound System, Bluetooth CD Sound System, CD Sound System, Sound System

ANKO 42661054 (01) PDF MANUAL - MANUAL-HUB.COM

File Info : application/pdf, 8 Pages, 2.22MB

ANKO 42661054 (01)

USER MANUAL BLUETOOTH CD SOUND SYSTEM 42661054
https://manual-hub.com/

CATALOGUE

SAFETY INSTRUCTIONS

PRECAUTIONS

PANEL INSTRUCTION

REMOTE CONTROL

GET STARTED

BASIC OPERATION

RADIO OPERATION

AUDIO OUTPUT AND INPUT

BLUETOOTH OPERATION

USB OPERATION

TROUBLESHOOTING GUIDE

SPECIFICATION

WARRANTY

CAUTION ! THIS PRODUCT UTILIZES A LASER. USE OF CONTROL OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
This CD Player adopts semiconductor unit, not including spare parts for users to replace. Don't take apart the machine by yourself to avoid electric shock. If the machine is damaged, please ask the qualified maintenance worker to repair.
POWER Power of this player should be used corresponding to the information on the rating label.
VENTILATION 5cm minimum distances around the CD plyaer for sufficient ventilation. The function of air vent on the main case is to keep CD Player from overheating. Don't block or cover the air vent and put the player on the bed or sofa. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
HEAT SOURCE The machine should be kept away from heat source, such as stoves and direct sunlight.
NAKED FLAME SOURCE The machine should be kept away from naked flame sources, such as lighted candles should be not placed on the machine.
WATER AND MOISTURE Don't use this machine in the humid environment, such as bathroom,kitchen, humid basement and so on. Caution: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
CLEANING Before cleaning, please put the power off first. Don't use liquid cleaners or corrosive fluid to clean the machine, just clean it by a soft cloth.
POWER While inserting or pulling out power cord,grip the plug not the wire.If do not use the machine for a long time, please pull out power cord. To be completely disconnect the power input, the

mains plug of machine shall be disconnected from the mains. The mains plug of machine should not be obstructed OR should be easily accessed during intended use.
DISC TRAY DOOR While closing the disc tray door, keep fingers away from it to avoid being damaged.
LOADING WEIGHT Don't put any heavy objects on the machine in order to keep the machine from being damaged.
CONNECTING OTHER EQUIPMENTS Before connecting other equipments with the CD Player, make sure to put off the power. Otherwise, it will make equipments or users damaged.
Radium Laser While the case is open and the CD Player is working, don't look at the laser directly with naked eyes, otherwise, it will have a bad influence on the eyesight.
DISC Avoid using the disc which is cracking, deformed or repaired, otherwise, the machine will appear malfunction or shorten usage life.
MALFUNCTION REQUIRINNG MAINTANENCE If the following problems appear, please put off the power, and contact the qualified maintanence worker. A.The power cord or plug is damaged. B.Liquid or other foreign matters in the unit. C.The machine is caught in the rain or watered. D.While the machine can't work even according to the manual operation, don't press other buttom which aren't mentioned on the manual.Otherwise, it will cause the machine damaged and take the mainantence worker more time to fix . E.The machine drops from high place. F.The inner part gives out a burnt smell.
Maintanence If you arenot familiar with the maintanence technical skill of the machine, don't try to fix it by yourself.If you open the main case, you might be get electric shock.If needed, contact the qualified maintanence worker.
SAFETY INSPECTION After maintanence, requesting maintanence worker to implement site safety inspection to make sure the machine works safely.
NOTE: The use of apparatus in moderate climates. Please read the manual carefully before using the machine, and keep it well for using in the future.

https://manual-hub.com/

1. When carrying the CD Player, use the original shipping carton and packing materials. It's the best way to protect the play with the factory package.
2.Don't place the CD Player nearby volatile liquid, and don't let the rubber or plastics product to connect with the player for a long time, which will leave traces on the machine cover.
3. After working for a long time, the upper covere or rear panel will give out heat, which belongs to normal phenomenon not malfunction.
4. While not using the CD Player, please take disc out and close the disc chamber, then turn off the power.
5. While not using the CD Player for a long time, some functional button may not work. In order to avoid appearing that phenomenon, advise to use it for a while or pay attention to moistureproof.
LOCATION PRECAUTIONS While placing the CD Player at the side of TV, Radio or Video Recorder, it may appear phenomenon like the picture showed not clear or the sound loses true. Therefore, keep the CD Player away from that kind of equipment.
CLEANING PRECAUTIONS 1. Cleaning by a soft cloth 2. Using a cloth with a little bit diluted detergent to wash the stain. Please remind that don't use any dissolvent such as thinner,gasoline solvents and volatile liquid, for which will damage the player cover. 3. Using chemical soaked cloth to clean the CD Player, Please wash the player according to the usage instruction.
NOTE: Cleaning and adjusting interior parts have to be operated by qualified maintanence worker, otherwise damage the player or shorten usage life.
DISC USAGE PRECAUTIONS 1. How to get a disc: don't touch the side of playing
2. Cleaning Disc: clean the disc from the center to outside by a soft cloth. If the picture and sound quality was influenced because of fingerprints or dust on the disc, wiping the disc by a wet cloth and then wiping by a dry cloth. Don't use Dissolved in toluene, detergent or Anti static spray to wash the disc, or damage it.

3. Storing the disc: placing the disc to the disc box instead of humid or dusty place and direct sunshine place.
BATTERY PRECAUTIONS If using batteries incorrectly, the battery fluid
would leak or the baterry will becorroded. Therefore,please operate correctly as the following instruction.
1.While putting batteries into remote control, don't take anti to the positive and negative polarity of the battery.
2.Don't charge the battery (not rechargeable batteries), disassemble and decompose the battery or put it into fire.
3.Don't use different models batteries together or new batteries with old ones.
4.Don't leave damaged or dead battery into the remote control.
5.If not using the remote control for a long time, put batteries out to proctect it from being damaged for battery fluid leaking.
6.If the remote control work abnormally or effective picture narrows, replace new batteries.
7.If battery fluid leaks, clean the battery case first and then replace new battery.
REMOTE CONTROL PRECAUTIONS If using the remote control incorrectly,it would
appear that the CD Player reception is not good enough or there is no reception. Therefore, please use it correctly as following instructions.
1.Keeping remote control launch head from being illuminated directly by intensive light source like sunlight, which leads to no reception or bad reception.
2.Put the remote control aim at the receiving window on the CD Player.
3.Don't drop the remote control or shock intensively. 4.Don't put water or other liquids into the remote control. 5.Don't take apart the remote control.
NOTE: 1. Keep the distance about 7 meters between
the remote control and the CD Player. 2. Keep omnibearing 30 degrees from the remote
to receiving window. 3. Put the batteries into battery case of remote
control, and then operate it.

PANEL INSTRUCTION
FRONT PANEL FUNCTION

1 2

3 4 5 6 7 8 9 1011

1.CD Door 2.Power Switch Function Key 3.Function Switch Function Key 4.Tone Function Key 5.Display screen 6.Play / Pause Function Key
REAR PANEL FUNCTION

7.Open / Close Function Key 8.Previous and VOL- Function Key 9.Bluetooth Indicator Light (when bluetooth is working, it will show blue color) 10.Next and VOL+ Function Key 11.Standby Indicator Light (when this unit under standby, it will show red color)

3 4

1.Audio Output 2.FM Radio Antenna Jack 3.USB Inserting Jack 4.LINE Inserting Jack 5.Power Cable Connect Jack

https://manual-hub.com/

REMOTE CONTROL
REMOTE CONTROL INSRTUCTION

GET STARTED

1.Power Standby Function key 2.Number Function key 3.Forward Function key 4.Reverse Function key 5.Play/Pause Function key 6.Stop Function key 7.FM Radio Function key 8.Single Track Copy Function Key 9.Volume - Function key 10.Mute Function key 11.Function Key (switch between CD, FM, AUX, Bluetooth mode) 12.All Tracks Copy Function 13.Bass - Function key 14.Bass + Function key 15.Track Switching Function key 16.Display Function key 17.Disc Chamber Function key 18.Go/To Function key 19.Previous Function key 20.Next Function key 21.Audition Function key 22.Radio Search Function key 23.Volume + Function key 24.SOURCE Function Key ( switch between CD and USB mode ) 25.Treble + Function key 26.Treble - Function key 27.On-Screen Display Function key 28.Repeat Function key

Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Prepare the remote control
1 2
3

Always follow the instructions in this chapter in sequence.
Connect power
Caution
Risk of product damage ! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. · Risk of electric shock ! When you unplug the
AC power cord, always pull the plug from the socjer. Never pull the cord. · Before you connect the AC power cord, make sure that you have completed all other connections.
Connect the power cable to the wall socket

To insert the remote control batteries: 1. Open the battery compartment. 2. Insert 2 x AAA batteries with correct polarity(+/-) as
indicated. The 2 x AAA battery not include in our products, please purchase from Authorized Seller. 3. Close the battery compartment. 4.The batteries not including in the accessories of goods.

Please Note: ·If you are not going to use the remote for a long time,
remove the batteries. ·Do not use old and new or different types of batteries
in combination. ·Please attention should be drawn to the environmental aspects of battery disposal, as contains chemical substances, so they should be disposed of properly. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

How to Turn on the unit

1. Connect the AC power cable and plug to the wall

socket;

2. Press "

" button on the front panel or "POWER"

function on the remote control to start the player .

2. Press " " button on the front panel or "POWER"

function key on the remote control again to close the

player.

Caution: If you do not use this player for a long time, please press"
"button and disconnected the AC power of this player.

https://manual-hub.com/

BASIC OPERATION

VOLUME ADJUSTMENT

Press

on the front panel or VOL-/VOL+ on the remote control to adjust volume .

TONE SETUP
1.Bass Setup: Press BASS-/BASS+ on the remote control to turn down or up Bass (between -14 and +14)

2.Treble Setup: Press TREBLE-/TREBLE+ on the remote control to turn down or up Treble (between -14 and +14).

3.Dual Mono: Press MODE on the remote control, there are three kinds of sound output to be selected: CH L, CH R and L R (stereo) .
4.DSP Setup: Press DSP on the remote control, then there are four kinds of different sound effects to be chosen.

RADIO OPERATION
SETUP When you want to listen to radio program, put the radio antena into the antena jack on the rear panel, and press FM button on the remote control. The CD player will turn to FM radio mode, and press SEARCH button to search radio channel automatically between 87 MHz and 108 MHz. After searching, the CD Player will save the radio channel automatically.
FM ANT
This connecting wire including in the accessories of goods.

CD PLAYER

Press

button on the front panel to be energized, and press

on the front panel or

on the remote control to make the Disk tray open, then put Disc correctly, and press the again, then play the Disc automatically after several seconds.

PLAY PAUSE STOP

While playing, press

on the front panel or

on the remote control to stop for a while, then

the Disc will be paused to play. Press

once more, the Disc resumes to play.

While playing, press

on the front panel or

on the remote control to stop for a while, then

the Disc will be paused to play. Press

once more, the Disc resumes to play.

PREVIOUS NEXT
While playing, press chapter played.
While playing, press chapter.

on the front panel for a few seconds or on the remote control to the previous on the front panel for a few seconds or on the remote control to the next

BASIC OPERATION

1.When you are listening to radio program,

press MODE button on the remote control,

then you can swift the sound track between

stereo and mono lang.

2.When you are listening to radio program,

press

on the remote control to the next

channel; press on the remote control to

the previous channel.

3.When you are listening to radio program,

press

on the remote control to

search channels up and down.

https://manual-hub.com/

AUDIO OUTPUT AND INPUT
Audio output instruction
(Audio output function only apply for CD and USB mode.) Use the connecting wires of left and right to connect the out terminal of this CD player and the audio input terminal of other AMP( amplifier).

This connecting wire not including in the accessories of goods.(red) Connecting Wires of Left and Right Channels

R
(red) L

(white) (white)

AMP

Audio input instruction Listen to external audio device
The unit can be used as a power amplifier to play the tracks from external audio device. You can listen to an external audio device, such as MP3 player/Mobile/Computer/TV through this unit. 1. Press FUNCTION button on the front panel or press FUNCTION button on the remote control. "LINE" will display on the screen. 2. Connect the external device into the unit's LINE jack with line cable. 3. Play the tracks from the external audio device.
LINE IN
This connecting wire including in the accessories of goods.

BLUETOOTH OPERATION
1 2
1.Standby Indicator Light (when this unit under standby, it will show red color) 2.Bluetooth Indicator Light (when bluetooth is working, it will show blue color) BLUETOOTH CONNECTION . 1.The player if connect the power successful, the player default on Standby mode and the standby indicator light on top right corner of front panel will show red. 2.Press to turn on the player,the red dot will disappear. 3.Press "FUNCTION" button on the player panel or on the remote control to switch Bluetooth mode; " " display on the screen and the blue dot on top right corner will blink. 4.Switch on your bluetooth device and search for 42661054 and connect it. 5.Once connected, a connection notification tone is heard from the player, the blue dot on top right corner will keep static.
Note: This model do not need the password.

LED DISPLAYE

https://manual-hub.com/

USB OPERATION
BASIC OPERATION When Playing the chapters in USB , the other steps are the same as the basic operation of CD Player(please check the page 7). If you want to change CD function and USB function, please press SOURCE KEY on the remote control.
Convert CD to MP3
Insert a USB drive to the USB port. Press Track COPY to convert a single track or ALL COPY to record the full disc. 1.While playing a CD track , insert a USB drive to the USB port. Press Track Copy on the remote control
to record a single track. 2. While playing a CD, insert a USB drive to the USB port. Press All Copy to record the full disc.

TROUBLE SHOOTING

Phenomenon

Cause

Measurement

No power

Disconnect the power plug Connect the power plug right

Don't work after being energized

No Disc

Put Disc into the CD player

Not connecting to the right jack connecting to the right jack

No sound

Disconnect the Audio Input lines
Equipment connected doesn't work or Volume is 0

connect the Audio Input lines
MakeEquipment connected work or turn the volume up

Not aiming to the receiving window

Remote control out of order

The distance bewteen the remote control and receiving window
The battery of remote control run out of electity

aiming to the receiving window Operating within 7meters Replace new batteries

MP3 without sound Disc has other modes files or with noise

Jump those files

https://manual-hub.com/

The Main Technical Parameter

Item Output

Parameter Frequency: 2 sound channel independent output

Disc supported

Audio characteristic
Output power (RMS)
Supply voltage

Frequency response : 20Hz - 20KHz Signal to noise ratio: 80dB Total harmonic distortion:<0.01% 2 x 10W ( THD 1% )
AC 220V-240V 50Hz

Measurement of CD Player (MM)

L400XW229XH139MM

Temperature Humidity
Accessories

15-75%( without the waterdrop) Remote controlManualAudio CableFM Radio Antena

WARRANTY

https://manual-hub.com/

References

Manual-Hub.com - Free English product PDF Documents!