Instruction Manual for Midland Pallet Trucks models including: TF15 Hydraulic Table Truck, TF15, Hydraulic Table Truck, Table Truck, Truck
TF15/TF15A Hydraulic Table Truck (Cable Release 2) I. Use & applicable range It is a convertible vehicle using for lifting and transporting in workshop, warehouse and wharf, etc. II. Basic Data: Model Load Capacity Lift Height Lowest Height Table Dimensions Packing Dimensions Net Weight TF15/TF15A 150kgs 730mm 210/330mm 700×450×35mm 800×470×260/340mm 37kgs III. Installing 1. Install the handle (#10) on the frame seat (#15), and fix them by two M10 bolts. 2. Insert the foot pedal (#63) into the hole of the foot pedal holder (#59), and fix them by M8 bolt. 3. Insert the brake thread (#14) into the press bolt (#45), and fix them by M8 nut. IV. Using 1. Test the cart before using it. Firstly step the foot pedal rod to lift the table to the max height, and then release the limit oil valve to check whether the cart is ok. 2. Please fix the cart and to brake the wheel before loading. 3. Adjust the table's height by step the foot pedal lift up and down to load or unloading in its rated loading. 4. When lower the table, draw up the handle. V. Warning (1) Operate strictly according to the instruction manual. (2) Do not use the cart on slop. (3) Do not allow people to sit or ride on the cart. (4) Keep feet and hand away from under the lowering table. Suggest to wear safety shoes during operation. (5) Do not transport the loads during the raising process. (6) Do not random regulate the safety valve. (7) The maintenance is to be performed by the professional person (8) Failure to operate the cart will cause the damage to the person health or property loss. (9) The cart must used in the rated capacity, it is not permit to load the heavy goods that the rated capacity of the cart.Microsoft Word 2016