Instruction Manual for THOMSON models including: TM-SAW38F, TM-SAW38F Bladeless Fan, Bladeless Fan, Fan
2025-02-16 — Instruction Manual. DC Bladeless Fan. Model: TM-SAW38F. Read this booklet thoroughly before using and save it for future reference. V1.0. 409. Page 2. 本手冊 ...
File Info : application/pdf, 16 Pages, 3.19MB
DocumentDocumentDC()
DC Bladeless Fan Instruction Manual
Model: TM-SAW38F
Read this booklet thoroughly before using and save it for future reference V1.0 409
b b
±' b ±b ±b ±b
1
7)[b b b ab b b ' ab b b b ab b b b aaa
b b
b b
bb b
2
7_)[8 Ya
Y
3
b b b
b
op opbop opab
b aa b
op b opb
opop iiiiiib op opo p opopb
opiiiii ibop o paab
4
opoIp opb op¢ op¢¢¢ b
b Tb
_b b
b bb b
op b
5
IUUQTFSWJDFXPOEFSUXEPXOMPBE30)4"QEG
6
Contents
1.lmportant Safety Instructions..........................................................................7 2.Product Features............................................................................................9 3.Guide To The Appliance..................................................................................9 4.Product Parameters.......................................................................................10 5.Functional Wiring Diagram.............................................................................10 6.Using Guide...................................................................................................10 7.Operation Guide.............................................................................................11 8.Maintenance...................................................................................................13 9.Malfunction Preclude......................................................................................14
Important Safety Instructions
1. Please ensure to connect it to the correct power supply before use. 2. Do not use this machine in an environment with high temperature and oily, flammable
and explosive gas. 3. Do not use metal objects or other objects to penetrate into the machine,
otherwise there may be a risk of electric shock or damage to the internal structure of the fan. 4. The machine can not bear heavy pressure, please do not place heavy objects or sit on the machine. 5. Please do not touch any live parts of the machine during work. If you need to pull out the power plug, please turn off the power first and then pull out the power plug. 6. It is strictly forbidden to disassemble or modify this product by yourself. The company is not responsible for all the consequences caused by self-disassembly or modification of this machine. 7. Do not completely cover the air inlet net of the machine to block the air intake, otherwise it may increase the fan load and damage the motor. 8. To prevent the risk of danger from the inadvertent resetting of the thermal cut-out, the appliance should not be supplied through an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off by the utility. 9. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a
7
safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.Children of less than 3 years should be kept away unless continuously supervised.Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance. CAUTION -- Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. 10.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 11.When the appliance is not in use and before cleaning, unplug the appliance from the outlet firstly. 12.WARNING: In order to avoid overheating, do not cover the heater.
Do not cover
13.The heater must not be located immediately below a socketoutlet. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. do not use this heater if it has been dropped; do not use if there are visible signs of damage to the heater; use this heater on a horizontal and stable surface WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
14.During use, avoid touching the air outlet grille to prevent burns. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. 15.The batteries in the remote control are harmful to the environment. Before discarding the product, the batteries must be removed from the remote control; and the batteries should be placed in a separate battery waste trash can for disposal by special personnel.
8
Guide To The Appliance
Oscillation Timer Speed Mode Power
Warm air mode Wind Mode Timer icon Oscillation angle
Oscillation
Timer
Speed
Mode
Power
Air outlet
Power on/off Speed -
Wind Mode
Display screen
Control panel
Timer Speed + Oscillation Warm air mode
Remote control
Air inlet
Bottom turntable
Power cord
Product Parameters
Rated Voltage110V~ Rated Frequency60Hz Rated Powe1200W
9
Using Guide
Remove the fan from the packaging and assemble the base as shown in the diagram. Place the fan on a stable surface and remove the protective cover from the power connector. After preparation, turn on the power, with a long buzz, the machine will enter the standby state. You can start the fan by touching the power button, or use the remote control to control the operation.
Thumb screw
Base
The product is equipped with a built-in tilt switch. Do not place the product on an inclined surface, as this may cause the product to malfunction when powered on.
Operation Guide
1POWER ON/OFF After plug on press the Power button " " , the fan will enter the power-on state. The default normal wind mode is 8 and the screen will display " ". Press the power button " " again, the screen and fan will continue to run for 15 seconds and stop, and the machine will enter standby mode.
Note: -When turned on, the machine will automatically turn off after 24 hours of no operation. -When the power supply is uninterrupted, if you turn it off and then on again, it will remember the mode, gear, and shaking state before the shutdown. If you unplug the power supply and turn it on again, the cooling mode will default to 8-speed automatic.
2ADJUST THE WIND SPEED After power on, press the Speed button " " or press the " +/- " of the remote control to adjust the speed, with a short buzz, the display will show corresponding speed. When it is in the highest speed "12 ", if you touch the speed button " " again, the speed will continue to cycle from speed 1. The speed will not cycle during remote control operation.
10
3MODE SETTING Press the Mode " " on machine to set the wind mode, wind model will change according to Normal wind-Nature wind-Sleeping wind-Warm air. Nature wind mode: The display screen will show " " , the wind speed simulates the natural wind, and the change of large and small winds. Sleeping wind mode: The display screen will show " " , the wind speed will be changed to suitable for sleep. Warm Air Mode: When the warm air " " indicator light is on and the speed setting displays " " , the fan enters the heating mode.
Note: You can switch the wind type by pressing the wind mode button " " on the remote control, the wind mode will cycle through normal wind - natural wind sleep wind - warm air. In any wind mode, press the warm air button " " to enter the warm air mode. In the warm air mode, use the " +/- " button to adjust the three warm air levels of high, medium and low.
4TIMER SETTING Press the Timer button " " for timer adjustment during the machine is working, the " h " will flash and display the timer time. The digit will will flash 5S means the setting the timer successfully and the timer will start running. The timer setting can be up to 12 hours. When " " hours are displayed, the timer function is turned off.
5OSCILLATION SETTING Press the Oscillation button " " start the oscillation funtion, the scillationangle is 30°, each time touching the oscillation button " " , the oscillationangle will be 30°60°-90°-cancel ...in turn, until the oscillation function is turned off.
Pay attention! Do not forcibly turn the fan's oscillation angle or external force to hinder its normal oscillation process, otherwise it may damage the mechanical structure of the fan and affect its use.
6aDISPLAY LIGHT STATUS When the fan is in working mode, if there is no operation for 60 seconds, the screen brightness will be halved without turning off the screen; click any key again to restore the screen brightness.
11
Maintenance
It is recommended to clean and maintain the machine every 3 to 4 weeks to ensure that the fan works more efficiently and the air outlet is cleaner.
Remove the filter of the machine, use a vacuum cleaner or a dry brush for cleaning, use a low-humidity dish towel to wipe the dust on the place where the filter is placed, put the filter back and cover it after drying.
Pull the buckle upward to open the filter screen cover
In order to ensure the purification effect, the filter can be replaced regularly depending on the actual situation, and the customer service staff can be consulted for the purchase of special accessories.
When cleaning the appearance of the product, please wipe the product with a soft and clean cloth. To remove stubborn stains, be sure to use a mild and neutral detergent. After cleaning, wait for the surface to dry before turning it on.
Pay attention!
Before carrying out any cleaning or maintenance work, always make sure that the appliance is disconnected from the mains supply by unplugging the power cord from socket-outlet.
When the machine has been turned on for 1000 hours grand total, the screen will flash " " dust full prompt every time it is turn off; After turning on the machine, press and hold the oscillation button for 3 seconds to clear the dust full prompt.
12
Malfunction Preclude
Malfunction description
Can not turn on the machine
Possible reason
The power cord is not correctly plugged into the power source.
Don not turn on the Power On/Off button of the remote
control / control panel.
Damaged power cord
The circuit board is damaged Foreign objects entering the fan
The product has abnormal sound
Damaged fan blades or casing Oscillation structure damage
Remote control is not sensitive
The machine do not oscillate / or stuck
when oscillation
Damaged motor
The remote control battery is low
The remote control is too far away
Remote control battery installed incorrectly Internal damage to the remote control
Oscillation structure damage
Damaged oscillation motor
A foreign object is stuck on the turntable
Measures
Plug the power cord into the power outlet securely.
Turn on the Power On/Off button of the remote control / control panel.
Contact Designated Maintenance center Contact Designated Maintenance center
Contact Designated Maintenance center
Contact Designated Maintenance center
Contact Designated Maintenance center
Contact Designated Maintenance center
Replace with new remote control batteries
Use close to the fan
Check whether the positive and negative poles of the
battery are correct Contact Designated Maintenance center Contact Designated Maintenance center
Contact Designated Maintenance center
Check and remove the foreign objects
13
14
TM-SAW38F
df d°dddd df dd
f dddf jeeeeeeeee een
f dd°df ddi f eee
df .1end
dd ddf df dd ed ddf j ddf ddf
Adobe PDF library 17.00 Adobe Illustrator 28.7 (Windows)