ACHIEVE THE IMPOSSIBLE
Vertical Awnings
HELLA
FOR ALL EVENTUALITIES
The perfect range
HELLA's range of vertical awnings follows the trend for large-format and side seam guided systems. The clear division into the categories of front-mounted, recess-mounted and concealed awnings makes it easy for customers to find what they need. All three categories are available with either side rail or cable guiding. HELLA thus offers the perfect solution for every installation situation.
HIGHLIGHTS
- Box sizes suitable for windows and façades
- Large selection of guide rails
- Can be combined with fall protection solutions
Product Categories
FRONT-MOUNTED AWNINGS
Making fabric shading the star of the show.
This variant uses an extruded cassette. It is possible to fix the guide rails directly onto the surface or with the help of spacers. The side seam guided covers are especially suitable for wind-exposed locations.
- Self-supporting, simple assembly
- Available box types: square (Q85/Q100/Q115/Q130/Q150), rectangular (E100/E115/E130), round (R130)
- Up to 6 m width and height (max. 18 m²)
- Optionally available with solar control for rectangular boxes of up to 3 m in width
Front-mounted awnings, cable guided
With particularly small cassettes, this design can be easily installed in any window recess with box brackets. The spring integrated in the box keeps the cables under tension at all times.
- Easy mounting with variable box beam
- Available box types: square (Q85/Q100)
- Up to 3 m width and 3 m height
- Spring tensioning integrated in the box
RECESS AWNINGS
The self-supporting solution that is flush with the façade.
This side seam guided model with self-supporting, extruded half-cassettes is ideally suited to integration into structural recesses.
- Self-supporting, simple installation in structural recesses
- Available box sizes: three half-cassette sizes (H100/H115/H130)
- Up to 3.5 m width and 4.5 m height
- Plug-in coupling stowed in the inspection cover
- Cable reserve in case roller tube needs to be replaced
- Guide rails can be fully rendered
Recess awnings, cable guided
The cable-guided standard version allows for simple bracket installation of the awning in the structural recess. Thanks to the spring-loaded cable guiding, the covers are always properly tensioned and provide perfect and unobtrusive heat protection.
- Simple mounting with bracket (116x50 mm) to the rear or top in structural recesses
- Up to 5 m width and 3 m height
- Drive system: crank handle or motor
CONCEALED AWNINGS
Save energy with more insulation.
This design is the ultimate side seam guided system with render boards on the cassette. This model is perfect for integration into rendered façades and can be accessed from below for maintenance at any time. Optionally, the rear of the cassettes can be insulated to save energy.
- Available box types: rectangular (E100/E115/E130)
- Up to 4 m width and 4 m height
- Guide rails can be fully rendered
- 20/30/40 mm insulation on the rear with EPS possible
- Impermeable to driving rain due to sealing profiles at the rear of the box and in the guide rails
Concealed awnings, cable guided
This concealed awning is specially designed for insulated rendered façades. Thanks to the easy-to-install box system with render carriers, it integrates inconspicuously into the façade. Optimum insulation behind the box saves energy at the same time.
- Easy mounting with brackets or directly onto the surface
- Available box type: rectangular (E115)
- Up to 3 m width and 3 m height
- Spring tensioning integrated in the box
TECHNICAL DETAILS
Highlights
- Drive with crank (front-mounted awnings protect and cable Q85/Q100) and motor
- ONYX, elero and Somfy remote control systems
- Cable reserve in the box in case roller tube needs to be replaced
- Cables and plugs can be stowed in the recess and rendered box
- Rendered boxes with optional insulation on the rear 20/30/40 mm EPS
Guide rails
Front-mounted awnings and recess awnings
- Standard guide rails for mounting directly on the surface or using spacers
- Optional deep guide rails for recess awnings and front-mounted awnings with rectangular box shape (100/115/130 mm)
Concealed awnings
- Deep guide rails to match the box depth (100/115/130 mm)
- Guide rails with sealing profiles resistant to driving rain
- Optional 20/30/40 mm aluminium adapter for spacing with insulation on the rear
Guide Rail Types
- Single guide rails: 32x55 mm, 32x49 mm (for Q85/Q100)
- Deep guide rails for flush mounting: (97/115/130 mm)
- Aluminium adapter for spacing: 20/30/40 mm
