Instruction Manual for kvm-tec models including: ultra line First Aid UVX, ultra line UVX, First Aid UVX, UVX, First Aid
Kvm-tec.com: Full HD & 4K KVM Extender over IP
File Info : application/pdf, 2 Pages, 532.79KB
DocumentDocumentkvm-tec Support support@kvm-tec.com Phone: +43 2253 81912 - 30 ultraline kvm-tec First Aid UVX No Power (No LED) USB is not working No Video Video error (stripes in the picture) Check the powerplug Is the power supply ok? Try another Unit. Try reprogramming the Unit by using a JTAG programmer Contact kvm-tec support Are the USB Devices plugged in correctly? Is the USB cable on the Local side plugged into the PC? Are the USB Devices working directly on the PC? Replace the USB cable from PC to the Local Extender Check if local and remote Unit have the same firmware Check if the local or the remote Unit is causing the problem by swaping first the local and than the remote Unit to another Unit Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in menu under point ,,O") Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in the menu under point ,,o") Check if both Units have the correct firmware Check if local and remote Unit have the correct firmware Contact kvm-tec support Check if the network switch is setup correctly and has enough bandwidth Check if other units have the same behaviour Contact kvm-tec support Contact kvm-tec support We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 81912 Misprints, errors and technical changes reserved Check out our Installation Channel: kvm-tec QUICK INSTRUCTION 4K Ultraline DP1.2 FIBER UVX - F 6902 SET FIBER 6902L CPU/LOCAL 6902R CON/REMOTE www.kvm-tec.com VIDEOADAPTER Please use a video adapter with 60 Hz (for video adapters with 30 Hz the screen will turn black and it would be a pity if you couldn`t see the great 4K image.) OUR RECOMMENDATION Club 3D - Type CAC - 1070 FIBERCABLE Please also use an OM3 cable to have enough bandwidth USB from keyboard and mouse Audio from Microphone Audio to speaker DP to Monitor DP to Monitor USB to PC Audio from PC DP in from PC Audio to PC Earth connection power plug 100-240 VAC audio UVX1-F CPU 15 16 17 audio power plug 12V 2A 18 19 20 UVX1-F CON RS232 RS232 usb 2.0 aux dp in dp out 1 dp out 2 red. Power 12V 2A 100-240V AC 50-60Hz 24VA usb 2.0 aux dp out 1 dp out 2 red. Power 12V 2A 100-240V AC 50-60Hz 24VA DP out to Monitor power plug 12V 2A DP out to Monitor Duplex Multimode OM3-Fibercable up to 300m/984ft Quick Installation 4K Ultraline Fiber Extender local / CPU remote/ CON power plug 100-240 VAC 1. Connect the CON / Remote and the CPU / Local Unit with the supplied IEC power cable. Optionally, you can also use a 12V 2A power supply. 2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit. 3. Connect the CPU / Local and the CON / Remote Unit with a fiber cable. 4. Connect the DP cable in the DP socket of the PC to the DP socket DP / in of the local device and connect the screen on the remote side with the DP cable. Optionally, connect the DP cable from the Local DP / out to the monitor. 5. Then connect PC audio/out with the audio cable to Local audio/in. Then connect audio/out via the audio cable 6. Almost done! Now connect the audio cable Local audio/out to the PC audio/in and Remote audio/out with the audio cable to the microphone. HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years) Please note that the recommended length of the display port cable should be max. 1.8m,5.9 ft otherwise interference-free 4K transmission may not be guaranteed. Misprints, errors and technical changes reserved