Product Description
The Panacom BL-1350TWS are True Wireless Stereo (TWS) earbuds. The following components are identified:
- 1. Function button and touch switch [on/off]
- 2. Indicating light (on earbud)
- 3. TWS Earbud (Left/Right)
- 4. Battery charging case
- 5. Microphone
- 6. Charging button (on case)
- 7. Indicating light for charging case
- 8. Battery charging contacts (inside case)
- 9. USB port (on case)
Function Button Operations
Play Music & Volume Control
- Startup & Pairing: Remove one earbud from the charging case. Press and hold the function button for 3-5 seconds until the earbud flashes blue/red light, indicating it is ready for pairing with a mobile device. Once one earbud is connected, remove the second earbud from the case; it should automatically connect to the first.
- Play/Pause: Press the function button once to play music, and press again to pause.
- Sound Volume: Double-click the function button on either the left or right earbud to increase or decrease the music/sound volume.
- Voice Service: Press the function button 3 times to activate the voice assistant on your connected device.
- Next/Previous Song: Press and hold the function button for 2 seconds on the left earbud to go to the previous song, or on the right earbud to go to the next song.
- Charging Earbuds: Place the earbud(s) back into the battery case. Press the charging button on the case to initiate charging for the earbud(s), indicated by an illuminated light. Press the button again to stop charging. If an earbud is unresponsive after removal from the case, place it back in the case and press the case's charging button to wake it up.
Phone Call Handling
- Answer/End Call: During an incoming call, press the function button once to answer. Press the button again to end the current call.
- Third-Party Call Management: If a call is active and a second call comes in, press the function button once to answer the new call and put the first call on hold. Press and hold the function button for 2 seconds to reject the new incoming call.
- Managing Multiple Calls: When the first and a third-party call are connected, and the second call is on hold, pressing the function button will end the third-party call. This action will reconnect the first and second calls, placing the third call back on hold.
Post-Sales Service & Warranty
For post-sales service and warranty inquiries, please contact:
0810-888-7262
