X10 MAX Quick Start Guide

Warranty Activation

To activate your warranty and receive a speaker or headphone, send your Amazon ORDER ID to: support@ohayo.com.cn.

Power On/Off

[2s ON/OFF] Press and hold for 2 seconds to turn the speaker on or off.

Packing Contents

• 1 * Bluetooth speaker
• 1 * Data charging cable
• 1 * Quick manual
• 1 * AUX audio cable

If you encounter any issues, please contact us via: support@ohayo.com.cn for assistance with returns or refunds.

Bluetooth Connection

Pairing

1. The Bluetooth indicator blinks.
2. On your device, select 'X10 MAX' from the list of available Bluetooth devices.
3. Once connected, the blue light blinks slowly when playing music and is steady when paused.

Mode Switch

[Double-click AUX] Double-click the AUX button to switch between modes: Bluetooth (BT), TF card, AUX input, and USB Audio.

Playback Controls

• Volume/Track: Short press to adjust volume up/down. Long press for next/previous song.
• Calls: Short press to answer/hang up a call. Long press to reject a call.
• Play/Pause: In music playing state, short press to play/pause. Long press to disconnect the Bluetooth connection.

Light & Bass Controls

• [Press] Short press to switch RGB light effect modes. There are seven modes, with the seventh turning off the light.
• [Press] Short press to switch music BASS mode.
• [Double-click] Double-click to wake up the voice assistant.
• [Press 5s] Long press for 5 seconds to restore factory settings.

Note: RGB light and BASS settings have a memory function; they will return to their previous state after the speaker is powered on again.

TWS (True Wireless Stereo)

[Press twice] Press twice to activate TWS pairing.

Charging

The indicator blinks while charging. When the battery is fully charged, the indicator light will be steady.

Product Parameters

Note: Product parameters are also available in Japanese, French, Italian, Spanish, and German.

Regulatory Information

FCC Conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and its accessories are marked with "CE" and comply with applicable European standards under the EMC Directive 2004/108/EC, RoHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. Products marked with this symbol should not be disposed of as unsorted municipal waste. Return to your local supplier or designated collection points for proper recycling. More information: www.recyclethis.info.

Warnings

WARNING: Built-in lithium battery! Do not charge or use in humid, hot, or cold environments. Fire danger!

(Warnings also provided in French, Italian, Spanish, German, Swedish, Polish, Dutch, Turkish.)

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.