Mammoth P6SD Series

Single Packaged Air Conditioning, 13 SEER

3, 4, 5 Ton Units

Product Overview

The P6 Series single packaged air conditioners are high-efficiency, self-contained cooling units designed for installation on a roof or a slab. The convertible unit design facilitates simple installations across various applications. Units are ETL and ETLc listed.

Features and Benefits

Model Identification Code

The model identification code provides key information about the unit configuration. Example: P6SD-X24K indicates a Packaged AC, Series 6, 13 SEER, R-410A TXV, 24,000 BTU capacity, 208/230V, 60Hz, Single Phase.

Structure: P (Application - Packaged AC) - 6 (Series) - S (Series) - D (13 SEER) - X (Refrigerant Type - R-410A TXV) - [Capacity in 1000 Btu] - K (Electrical Code - 208/230-60-1).

Dimensions

Side View

Overall unit height is 30.0 inches. Key vertical dimensions include 27.2 inches and 23.6 inches. The unit depth is 4.00 inches. Entry points are specified: 1.75-inch diameter power entry (capped), 1.25-inch diameter power entry, and 0.88-inch diameter control wiring entry. A 1.8-inch measurement is also indicated.

Dimensions and Center of Gravity
Model Number Unit Weight (lbs) Center of Gravity (inches) Height (inches) with base rails
A B C
P6SD-X36 405 29.5 26.0 35.0
P6SD-X48 415 29.5 26.5 35.0
P6SD-X60 480 30.0 27.5 43.0

Top View

The top view shows the layout of components and duct openings. Key dimensions include an overall width of 47.5 inches. Duct openings are marked: Downflow Supply Duct Opening (13.3 inches B dimension) and Downflow Return Duct Opening (12 inches A dimension). A 0.75" NPT Female Drain Connector is located at the top rear. Center of Gravity (CG) is indicated.

Back (Duct) View

The back view illustrates the supply and return duct connections. Key dimensions include an overall width of 55.8 inches. Supply duct dimensions are 13.5 inches by 16.0 inches. Return duct dimensions are 13.5 inches by 16.0 inches. The condensing coil area is also shown. Vertical dimensions include 14.7 inches (C) and 5.0 inches for supply, 4.0 inches for return.

Specifications

P6SD Series Specifications
Model Number X36K X48K X60K
Performance Capacity - Cooling BTUH 34,200 46,000 58,000
Efficiency - SEER 13.3 13.0 13.3
EER (Btuh/watt) 11.2 11.5 11.0
Electrical Rating - 60 Hz Phase 1 1 1
Operating Voltage Range 187 - 253 187 - 253 187 - 253
Compressor Data Volts 208 / 230 208 / 230 208 / 230
Rated Load Amps 18.6 24.3 29.3
Lock Rotor Amps 79 117 134
Indoor Blower Type / No. of Speeds DD / 3 DD / 3 Fixed Torque / 5
Motor - HP / RPM 1/4 - 1075 1/2 - 1080 3/4
Motor - Amps 1.3 3.1 6.0
Outdoor Fan Motor - HP / RPM 1/4 - 1100 1/4 - 1100 1/4 - 1100
Motor - Amps 1.2 1.2 1.2
Fan Diameter / CFM 20 / 3600 20 / 3800 20 / 3800
Refrigerant Charge - Oz. 110 168 192
Shipping Weight (lbs) 415 425 490

Blower Performance

External Static Pressure Drop - inches water column. Note: Airflow performance is with a dry coil.

Blower Performance
Model Number External Static Pressure Drop - inches water column
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
P6SD-X36 High 1610 1562 1504 1442 1365 1295 1214 1109
Medium 1367 1320 1271 1205 1138 1065 968 845
Low 1153 1102 1043 990 912 831 731 618
P6SD-X48 High 2361 2278 2218 2141 2066 1976 1870 1758
Medium 2026 1982 1935 1889 1822 1744 1660 1554
Low 1584 1568 1532 1489 1445 1387 1322 1236
P6SD-X60 Tap T1 1515 1450 1380 1350 1280 1250 1200 1160
Tap T2 1580 1520 1460 1400 1300 1280 1260 1230
Tap T3 1740 1690 1650 1600 1360 1500 1460 1390
Tap T4 1960 1910 1840 1820 1540 1740 1700 1600
Tap T5 2090 2050 2010 1975 1780 1900 1850 1790

* Denotes factory set cooling speed

** Denotes factory set electric heating speed

Heater Application Matrix

Model Identification Code for Heater Kits: H (Heater) - 3 (3-Pkgd. Units) - HK (Heater Kit) - [Nominal KW] - H (Electric Heater KW) - [Electric Code H=240-1-60] - 1 (Stages Sequencer) - [No. of Breakers].

Heater Application Matrix
TONNAGE & PHASE UNIT NOMINAL KW HEATER KIT MODEL HEATER KIT PART NUMBER BREAKERS REQUIRED
3 Ton, Single Phase P6SD 5 H3HK005H-01B 917166B None
8 H3HK008H-01B 917167B None
10 H3HK010H-01B 917168B None
15 H3HK015H-01B 917169B 2
4 Ton, Single Phase P6SD 15 H3HK015H-21B 917172B None
5 H3HK005H-01B 917166B None
8 H3HK008H-01B 917167B None
10 H3HK010H-01B 917168B None
15 H3HK015H-01B 917169B 2
5 Ton, Single Phase P6SD 15 H3HK015H-21B 917172B None
20 H3HK020H-01B 917170B 2
20 H3HK020H-21B 917173B None
5 H3HK005H-01B 917166B None
8 H3HK008H-01B 917167B None
10 H3HK010H-01B 917168B 2
15 H3HK015H-01B 917169B 2
15 H3HK015H-21B 917172B None
20 H3HK020H-01B 917170B 3
20 H3HK020H-21B 917173B 1

Electrical Data

P6SD Series - 208/230V - Single Phase Models

Electrical Data - Single Circuit and Multiple Supply Circuit Options
MODEL NUMBER P6SD- HEATER INSTALLED NOMINAL KW SINGLE CIRCUIT MULTIPLE SUPPLY CIRCUIT OPTION
MCA MOP CIRCUIT A (Compressor & Fan) CIRCUIT B (Blower & Heater)
MCA MOP MCA MOP MCA MOP
X36K 0 25.8 40 - - - -
5 26.5 40 - - - -
8 41.2 45 - - - -
10 51.6 60 - - - -
15 76.6 80 50.0 60 26.6 30
X48K 0 32.9 50 - - - -
5 32.9 50 - - - -
8 41.2 50 - - - -
10 51.6 60 - - - -
15 76.6 80 51.6 50 26.6 30
20 101.6 110 50 50 51.6 60
X60K 0 43.8 70 - - - -
5 43.8 70 - - - -
8 43.8 70 - - - -
10 51.5 70 43.8 70 50 60
15 76.5 80 51.5 70 25 30
20 101.5 110 43.8 70 50 60

Note: P6SD 3 & 4 ton models have PSC motors. Since the power wires run through the heater plug, keep the blower and heater on different circuits when adding a heater kit.

Copper Wire Size - AWG (1% Voltage Drop)

Copper Wire Size - AWG (1% Voltage Drop)
Supply Wire Length-Feet Supply Circuit Ampacity
200 150 100 50 15 20 25 30 35 40 45 50
6 8 10 14
4 6 8 12
4 6 8 10
4 4 6 10
3 4 6 8
3 4 6 8
2 3 4 6
2 3 4 6

Wire Size based on N.E.C. for 60° type copper conductors.

Accessories

Accessories List
Description Part Number
Roof Curb (8") 547830
Roof Curb (14") 547831
Roof Curb (18") 547850
Roof Curb (24") 547851
Supply/return transition, 16" 547834
Supply/return transition, 18" 547835
Concentric diffuser, flush, 16" 547836
Concentric diffuser, flush, 18" 547837
Concentric diffuser, step down 16" 547838
Concentric diffuser, step down 18" 547839
Manual Fresh Air Damper 547832
Motorized Fresh Air Damper 547840
Economizer, downflow w/filter (does not require filter kit) modulating 558870
Economizer, horizontal modulating 547841
Power Exhaust, downflow economizer (special order) 547842
Power Exhaust horizontal economizer (special order) 547843
Hood Type Hail Guard 34" X 76” P6SD-X36, P6SD-X48 547846
Hood Type Hail Guard 38" X 76” P6SD -X60 547847
Duct Smoke Detector Photo Elec 558863
Multi Signal Control 558866
Sampling Tube DST5, 2-4' 558864
Sampling Tube DST5, 4-8' 558865
Filter Rack, All Downflow Applications (not required with economizer) 547885
Filter Kit (not required with economizer) P6SD-X36, P6SD-X48 547887
Filter Kit (not required with economizer) P6SD-X60 547888
Universal Hard Start Kit 912933
Low Ambient Kit 918837
Skirt Trim Kit 919729
Heater Kit - 4-Pole single circuit adaptor 913350
Heater Kit - 6-Pole single circuit adaptor 913556
Heater Kit - Circuit breaker single phase (2-pole) 913554
Freezestat Kit 917108
Outdoor Tstat Kit 913852
Duct Adapter, 12" Round (2 each) 913811A
Duct Adaptor, 14" Round (2 each) 913812A
Control, CO2 sensor, wall mount 547848

Cooling Expanded Ratings

Ratings are provided for various outdoor temperatures (O.D.T.), entering air conditions (E.D.B./E.W.B.), and airflow (CFM).

P6SD-X36

P6SD-X36 Cooling Expanded Ratings
CFM 85°F 95°F 105°F 115°F
E.D.B. E.W.B. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W.
900 80 62 32.7 26.3 2.67 31.2 26.4 2.95 29.6 27.2 3.27 27.9 26.8 3.64
80 67 35.6 21.3 2.70 33.9 20.7 2.98 32.1 20.2 3.30 30.1 19.5 3.67
80 72 38.9 16.3 2.75 37.1 15.8 3.03 35.2 15.2 3.34 33.1 14.7 3.71
1000 75 63 33.1 21.0 2.68 31.5 21.1 2.95 29.8 21.0 3.28 28.0 20.6 3.64
80 62 33.5 28.0 2.68 31.9 29.0 2.96 30.3 29.0 3.28 28.7 28.7 3.65
80 67 36.2 22.5 2.71 34.4 22.0 2.99 32.6 21.4 3.31 30.7 20.9 3.67
80 72 39.6 17.1 2.76 37.8 16.6 3.04 35.8 16.0 3.35 33.7 15.5 3.72
75 63 33.7 23.1 2.68 32.0 22.9 2.96 30.4 22.8 3.28 28.6 22.2 3.65
1100 80 62 34.7 31.2 2.69 33.1 31.3 2.97 31.6 31.6 3.30 29.9 29.9 3.66
80 67 37.3 24.5 2.73 35.5 23.9 3.00 33.6 23.2 3.32 31.6 22.6 3.69
80 72 40.7 18.2 2.77 38.8 17.7 3.05 36.7 17.2 3.37 34.5 16.6 3.73
75 63 34.8 26.0 2.70 33.1 25.6 2.97 31.3 24.9 3.29 29.4 24.2 3.66

P6SD-X48

P6SD-X48 Cooling Expanded Ratings
CFM 85°F 95°F 105°F 115°F
E.D.B. E.W.B. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W.
1250 80 62 44.1 35.7 3.45 42.2 36.0 3.84 40.0 37.1 4.27 37.8 36.6 4.77
80 67 47.9 28.8 3.50 45.5 28.0 3.87 43.1 27.2 4.31 40.6 26.7 4.80
80 72 52.1 21.9 3.54 49.5 21.2 3.92 46.9 20.5 4.35 44.2 19.8 4.85
75 63 52.1 16.3 3.54 49.5 16.7 3.92 47.0 16.7 4.35 44.2 16.4 4.85
1400 80 62 45.2 38.2 3.46 43.1 39.5 3.85 41.0 39.5 4.29 39.0 39.0 4.78
80 67 48.7 30.6 3.51 46.3 29.8 3.88 43.9 29.4 4.32 41.4 28.6 4.81
80 72 52.9 23.1 3.54 50.4 22.4 3.93 47.7 21.6 4.36 44.9 20.9 4.86
75 63 53.1 18.2 3.55 50.5 18.2 3.93 47.7 17.9 4.36 45.0 17.4 4.86
1550 80 62 46.2 41.8 3.47 44.2 41.9 3.86 42.2 42.2 4.30 40.1 40.1 4.80
80 67 49.6 32.7 3.51 47.1 32.0 3.89 44.6 31.2 4.33 42.0 30.4 4.82
80 72 53.8 24.2 3.55 51.1 23.5 3.95 48.4 22.8 4.37 45.5 22.0 4.86
75 63 53.8 20.3 3.55 51.1 19.8 3.95 48.4 19.2 4.37 45.5 18.4 4.87

P6SD-X60

P6SD-X60 Cooling Expanded Ratings
CFM 85°F 95°F 105°F 115°F
E.D.B. E.W.B. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W. T.C. S.C. K.W.
1600 80 62 56.7 45.9 4.53 54.1 46.1 5.02 51.3 47.5 5.57 48.4 46.7 6.19
80 67 61.2 37.4 4.62 58.1 36.4 5.09 55.0 35.3 5.65 51.7 34.2 6.26
80 72 66.6 28.6 4.72 63.1 27.7 5.20 59.5 26.8 5.75 55.7 25.7 6.36
75 63 57.0 36.9 4.54 54.2 37.0 5.02 51.2 36.7 5.57 48.2 36.0 6.18
1750 80 62 57.8 48.3 4.59 55.1 49.9 5.07 52.2 49.9 5.62 49.3 49.2 6.24
80 67 62.0 39.2 4.67 58.9 38.1 5.14 55.7 37.0 5.70 52.3 35.8 6.31
80 72 67.1 29.8 4.77 63.5 28.8 5.24 59.9 27.8 5.79 56.2 26.8 6.41
75 63 57.8 40.1 4.59 54.9 39.8 5.07 51.9 39.1 5.62 48.8 38.1 6.23
1900 80 62 58.7 52.1 4.64 56.0 52.2 5.13 53.1 53.0 5.68 50.4 50.4 6.30
80 67 62.7 40.9 4.72 59.6 39.8 5.20 56.3 38.7 5.75 52.8 37.5 6.36
80 72 67.5 30.9 4.81 64.0 29.9 5.29 60.5 28.8 5.84 56.7 27.7 6.46
75 63 58.5 43.5 4.64 55.6 42.7 5.12 52.5 41.6 5.66 49.3 40.3 6.28

General Terms of Limited Warranty

Nortek Global HVAC, LLC will furnish a replacement for any part of this product which fails in normal use and service within the terms and conditions of the warranty.

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy.

Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (10/2015)

Model: 800C-1014 (Replaces 800C-0910)

Website: www.mammothlc.com

Trademark Mammoth® used under license. © Nortek Global HVAC, LLC. All Rights Reserved.

Models: P6SD-X36K, P6SD-X48K, P6SD-X Air Conditioner Packaged, Air Conditioner Packaged, Conditioner Packaged, P6SD-X60K

File Info : application/pdf, 8 Pages, 647.15KB

800c

References

TCPDF 6.0.003 (http://www.tcpdf.org)

Related Documents

Preview Mammoth R8HE Series 3-Phase Gas/Electric Packaged Unit: Technical Specifications & Features
Detailed technical specifications, features, dimensions, and performance data for the Mammoth R8HE Series 3-Phase condensing gas/electric packaged HVAC unit, including 95% AFUE heating and 14 SEER cooling. This document provides comprehensive information for model selection, installation, and operation.
Preview Mammoth R8GE Series: High-Efficiency Gas/Electric Packaged HVAC Units
Discover the Mammoth R8GE Series, high-efficiency gas/electric packaged units featuring 14 SEER cooling and 81% AFUE heating. Designed for flexible rooftop or slab installation, these units provide reliable performance and advanced features for commercial HVAC needs.