JOYO ZIP AMP REVOLUTION Series Overdrive
Product Manual
Model: R-04
Specifications
- Dimensions: 109*67*48mm
- Weight: 248g
- Input Impedance: 1MΩ
- Output Impedance: 47Ω
- Rated current consumption: 20mA
- Working Voltage: DC 9V (center minus)
Product Overview and Controls
Top Panel Layout
The top panel features several controls and indicators for the JOYO ZIP AMP R-04.
- Low Control: Adjusts the low frequencies.
- High Control: Adjusts the high frequencies.
- Drive Control: Controls the amount of overdrive or distortion.
- Volume Control: Sets the overall output volume.
- Compress Mode: Selects the compression mode.
- Normal Mode: Standard operating mode.
- Effects Indicator: An LED that shows when the effect is active.
- Output Socket: For connecting to the amplifier or next pedal in the signal chain.
- Input Socket: For connecting the guitar.
- Footswitch: Engages or disengages the effect.
- Front ambience LED light: An LED light on the front of the pedal.
Rear Panel Layout
The rear panel contains connections and operational switches.
- DC Power Input: Standard 9V DC center-negative power connector.
- Rear ambience LED light: An LED light on the rear of the pedal.
- Feet: Rubber feet to prevent slipping.
- Toggle Switch (SYNC/ALWAYS/OFF): Controls the behavior of the LEDs.
- SYNC: All LEDs (sides and top) are controlled by the footswitch.
- ALWAYS: Side LEDs are always on; the top LED is controlled by the footswitch.
- OFF: Side LEDs are off; the top LED is controlled by the footswitch.
Manufacturer Information
Company: JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao'an, Shenzhen, 518133 China.
Email: info@joyoaudio.com
Telephone: 0086-755-29765381
Website: www.joyoaudio.com
Made In: CHINA
Product Service Policy
In the event of non-human-induced performance failure during normal product use, consumers are entitled to warranty service for 12 months from the date of purchase.
Consumers cannot enjoy warranty rights under the following circumstances:
- 1. Human-induced damage.
- 2. Exceeding the warranty period.
- 3. No warranty card and valid invoice, unless product damage within the warranty period can be proven otherwise.
- 4. Warranty card does not match the product model, or the warranty card has been altered.
- 5. Product damage caused by failure to use, maintain, or service according to the instruction manual.
- 6. Unauthorized disassembly, repair, or water damage/dropping of the product by JOYO.
- 7. Damage caused by force majeure.
JOYO Service Information:
- Consumer Service Hotline: 0755-29765390
- For more information, please visit: www.joyochina.cn
JOYO Product Warranty Card
Product Model | Purchase Date | SN Number | Name |
---|---|---|---|
User Information | |||
Phone | |||
Address | |||
Invoice Number | |||
Sales Unit Information | |||
Name (Company Seal) | |||
Address | |||
Phone |
Product Qualification Certificate
Inspection Conclusion | Inspector No. | Date |
---|---|---|
Qualified | QC 01 |
Brand: JOYO
Product Name: Effect Pedal
Standard: QB/T 4324-2012
Manufacturer: Shenzhen Joyo Technology Co., Ltd.
Address: 2nd Floor, Luxi Industrial Building, Xin'an 3rd Road, Bao'an District, Shenzhen, Guangdong Province. Postal Code: 518133
After-sales Service Hotline: 0755-29765390