Instruction Manual for ROCKER models including: 197100-10SC, 197202-47, 197202-53, 19720, 0-47, 197200-48, 197200-53, 197100-10SC Heavy Duty Vacuum Bottle, 197100-10SC, Heavy Duty Vacuum Bottle, Duty Vacuum Bottle, Vacuum Bottle, Bottle

PP Vacuum Bottle Instruction Manual RO-OPE197200-53-EN202405-A02 (PP整合修改)

4L PP Heavy-Duty Vacuum Bottle Instruction Manual

4000mLPP Heavy-Duty Vacuum Bottle - Rocker Scientific

PP Vacuum Bottle Instruction Manual RO-OPE197200-53 ...

21 ago 2024 — Non-abrasive, neutral, no film former detergent is recommended for bottle cleaning. 2. The bottle are autoclavable, at 121 - 123 °C (250 -253 °F) at 1.0 bar ...2 pagine

PP Vacuum Bottle Instruction Manual

PP Vacuum Bottle1000 mL / 2000 mL - Rocker Scientific


File Info : application/pdf, 2 Pages, 331.80KB

PDF preview unavailable. Download the PDF instead.

RO-OPE197200-53-EN202405-A02-1
INSTRUCTION MANUAL
Model : PP Heavy-Duty Vacuum Bottle

Carefully check if the shipping carton is damaged before unpacking. Please check the items according to standard package list. If you have any question, please preserve serial no. & shipping carton and contact your dealer for quick solution.

Model

PP Vacuum Bottle, 1000 mL

PP Vacuum Bottle, 2000 mL

197100-10SC

197202-47

197202-53

1. Cap

GL45

B83

B83

2. Connector Hose barb

Hose barb

Quick-coupling

(ID4~ID8)

(ID4~ID8)

connector (ID6)

3. Overflow protection
4. Bottle

Yes 1000 mL

Yes 2000 mL

Yes 2000 mL

5. Drain device -

-

-

197200-47 B83 Hose barb (ID4~ID8) Yes
4000 mL -

2 1

2

3

1

3

PP Vacuum Bottle, 4000 mL

197200-48

197200-53

B83 Hose barb (ID4~ID8) Yes

B83 Quick-coupling connector (ID6) Yes

4000 mL Yes

4000 mL -

Hose Barb

Quick-Coupling Connector

4 4
5

1L

2L

4L

* Overflow protection blocks the AIR outlet when liquid is full, preventing liquid from being aspirated into the pump.
Maintenance

1. Non-abrasive, neutral, no film former detergent is recommended for bottle cleaning. 2. The bottle are autoclavable, at 121 - 123 °C (250 -253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min. Please remove the cap
from bottle before autoclaving to prevent bottle deformation. * The rubber tube of drain device is not autoclavable. 3. Thick and durable wall of this bottle can hold near full vacuum for 24 hours. 4. The PP bottle is applicable to most of low concentrated chemicals, please refer to chemical compatibility chart before use. 5. Do not keep strong organic compounds in this bottle for long-term storage.

Vacuum Bottle

PP Bottle, 1000 mL 197100-10SC

Usage Guide
PP Bottle, 2000 mL 197202-47 / 53

PP Bottle, 4000 mL 197200-47 / 48 / 53

21
Suction Cap O-ring Overflow Protection
Silicone Tube
1L PP Bottle

Cap
Cap adaptor O-ring Silicone tube Overflow protection
Vacuum bottle

12 3

12

Male fitting Female fitting

Hose barb

Quick-coupling connector

1 "AIR"Air Outlet

2 "LIQ"Liquid Inlet

3 Cap Lid

*Drain connector *Clip and rubber tube

*Same procedure applies to a 2L bottle as well.
Installation and Operation 1. Install the silicone tube and overflow protection device on cap inside labeled "LIQ" and "AIR" respectively. Then push the
installed cap adaptor upward to stick to the cap. 2. Connect the "AIR" air outlet (1) to the vacuum source using a silicone tube. 3. Connect the "LIQ" liquid inlet (2) to the liquid source, such as manifold or suction kit using another silicone tube. 4. Plug the 3rd opening on cap adaptor with cap lid (3) to keep airtight, then remove it for pressure release. · For sterile pressure equalization, a 0.2 m syringe filter can be inserted into port of suction cap.
Quick-Coupling Connectors (for 197200-53, 197202-53) Press and hold the button on female fitting to release male fitting ,and female fitting will close immediately to keep airtight.
Drain Device (for 197200-48) 1. Connect the rubber tube to drain connector and clip the rubber tube to seal liquid. 2. Remove the cap lid for pressure release before drain the waste liquid. 3. Remove the clip, or clip on the drain connector, to drain out waste liquid.

Ordering Information

197100-10SC 197100-10SCN
197000-61-P2N 197000-61-P2 167200-38 199100-68 194225-01

PP Vacuum Bottle, 1000 mL PP Vacuum Bottle without Overflow protection, 1000 mL SC45 Suction Cap SC45 Suction Cap Kit Silicon Tube (6 x 12 mm), 100 cm Silicon Tube (4.2 x 8 mm), 200 cm PTFE Syringe Filter, 25 mm, 0.22 m

197202-47 197202-53
197200-47 197200-48 197200-53

PP Vacuum Bottle, 2000 mL PP Vacuum Bottle with Quick-Coupling Connector, 2000 mL PP Vacuum Bottle, 4000 mL PP Vacuum Bottle with Drain, 4000 mL PP Vacuum Bottle with Quick-Coupling Connector, 4000 mL

Rocker Scientific Co., Ltd. www.rocker.com.tw +886-2-26033311 RO-OPE197200-53-EN202405-A02



References

Adobe PDF library 15.00 Adobe Illustrator CC 23.1 (Windows)