Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Setup Instructions

1. Remove the battery cover by pressing the top of the cover and pulling it downwards.
2. Remove the receiver.
3. Insert the battery.
4. Close the battery cover.
5. Make sure the mouse is turned on via the switch on the bottom of the mouse.
6. Recommended: Insert receiver into the receiver extension cable. Insert extension cable into your USB port. Alternatively, insert receiver directly into your USB port.
7. Download the G HUB software from logitechG.com/GHUB or logitechG.com/support.

Tips

• To make your mouse lighter, a lithium AA battery (not included) can be used.
• Keep the mouse and receiver 2 meters or more away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise.
• The G304 / G305 has a wireless range of up to 10 meters. To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse.

6 Fully Programmable Buttons

• 1 Left (Button 1)
• 2 Right (Button 2)
• 3 Wheel click (Button 3)
• 4 Forward (Button 4)
• 5 Back (Button 5)
• 6 DPI cycle (Button 6)
• 7 On/Off switch (bottom of mouse, not programmable)

LED Indicator

Battery Life

Flashing red: battery <15%

DPI Levels

• Yellow: step 1 - 400 DPI
• White: step 2 - 800 DPI (default)
• Orange: step 3 - 1600 DPI
• Magenta: step 4 - 3200 DPI
• Blue: step 5 - 6400 DPI (Step 5 can be activated via software only)

Mode

• Cyan: performance mode (default)
• Green: endurance mode (can be activated via software only)

Tips

• Activating endurance mode will degrade tracking performance but improve battery life.

G HUB Software

You can customize the onboard profile settings using the G HUB. These settings include button programming, report rate, performance/endurance modes, and tracking behavior. The G304 / G305 allows up to 5 DPI settings.

Default Settings

• DPI: 400/800/1600/3200
• Report rate: 1ms
• Performance mode