Instruction Manual for Merlin models including: Merlin, Bolt, Air mount, Wireless, Car Charger, With, Automatic Clamps

Slide 1

user

Bolt Air mount Wireless Car Charger FAQ With Automatic Clamps

1 Thank you for purchasing this Merlin Product. Please read the instruction manual carefully before using the product. The documentation provided will allow you to fully enjoy all the

Bolt Air mount Wireless Car Charger With Automatic Clamps

Thank you for purchasing this Merlin Product. Please read the instruction manual carefully before using the product. The documentation provided will allow ...

instruction manual carefully before using the product. The documentation provided will allow you to fully enjoy all the features this unit has to offer.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 741.08KB

Document Document

Bolt Air mount Wireless Car Charger With Automatic Clamps
Thank you for purchasing this Merlin Product. Please read the instruction manual carefully before using the product. The documentation provided will allow you to fully enjoy all the features this unit has to offer. Please save this manual for future reference. Introduction Wireless charging car accessory for your Qi enabled devices.

FAQ
Q) Bolt AirMount does not stay in place? A) Make sure that the Lock & Release button is fastened.
Q) Can I use any size device? A) Bolt AirMount can hold most types of smartphones
Maintenance
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product too much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and will malfunction if this occurs.
6. This product has no user serviceable items inside. Do not open this product as the user risk injury and would void the warranty.
7. Keep unit away from strong magnetic fields to avoid interference with the product.

1) Clean the back of your Smartphone to remove any lint or dust. 2) Please make sure the product connect to the power before
using. 3) If the charger connected with power, Green LED light turn on. 4) The LED indicator light will flashes and the device stop charging
when the voltage power is more or there is some obstacle or object between mobile and device. 5) Touch the power button to open the two arms and place phone on the charger, then the phone will start wireless charging and the two arms lock automatically. To take the phone from the charger, press the power button again to release two arms.
1

2