User Manual for SECURECOM models including: DM-RF Wireless Open-Close Sensor for Door Master Door Controllers, DM-RF, Wireless Open-Close Sensor for Door Master Door Controllers, Wireless Open-Close Sensor, Open-Close Sensor, Door Master Door Controllers, Door Controllers, Controllers

DM-RF EN v1-0

User

Door Master 300 BLE-tag manual

Bluetoothgivare för Door Master 300 grindstyrning

Wireless open/close sensor for DOOR MASTER door controllers

PDF preview unavailable. Download the PDF instead.

doormaster-ble-tag
DM-RF
Wireless open/close sensor for DOOR MASTER door controllers
Content of the package
 DM-RF transmitter  Neodymium magnet counter pair  Self-tapping screw (4pcs)  Screw protection cap (2pcs)
 Warranty ticket
DM-RF

General information
The DM-RF opening sensor is an additional component of the DOOR MASTER Smartphone door control/remote control units. The DM-RF contains a state-of-the-art semiconductor-based magnetic field sensor that detects the proximity of a magnetic counter-pair - included in the package - and indicates its presence or absence. The signal is sent via Bluetooth radio link using a broadcasting messaging protocol to the gate opener controller and therefore does not require any training or device pairing. To activate the opening detector, just enter the 4 digits on the back of the door opener in the corresponding field of the door opener settings and the closed or open position of the opening detector will be visible.  Power supply: lithium battery ER-14250 3V (included)  Battery life: 10.000 indications - 5 years (10 events per day)  RF communication: Bluetooth 2.4GHz  Operating range from the receiver: max. 20 m  Detection distance of magnet: max. 20mm  Degree of protection: IP68  Temperature range: -40°C / +85°C  Transmitter dimensions: 70x48x24mm  Magnet dimensions: 40x20x25mm
Installation
When mounting on the gate, care must be taken to ensure that the mounting clearances remain within the permissible clearance in the closed gate position.
Moving the magnet closer or further away from the device, i.e. opening or closing the gate will cause the blue LED on the unit to flash. (this is visible under the cover plate in low light conditions)
Battery replacement
The voltage of the ER14250 lithium (Li-SOCI) battery in the device is continuously monitored by the application. If the value is low, it will alert the user, indicating the need for battery replacement. By removing the 4pcs rubber protection caps on the cover plate of the unit, it can be unscrewed and the battery can be replaced with the above mentioned type.
DM-RF


Microsoft: Print To PDF