LE143S-T6503-100-AR1-S-150 Lead Screw Motor
Product Model: LE143S-T6503-100-AR1-S-150
General Information
Part Number: 16267001111
Order Number: ON9899A
Unit: mm
Dimensions and Drawings
Motor Front View:
(Drawing showing a square motor with mounting holes and shaft)
Dimensions: 35.3mm (Max.), 26 ±0.1, 35.3mm (Max.)
Mounting Holes: 4-M3, Depth 2.5Min.
Motor Side View:
(Drawing showing the motor with lead screw and nut)
Dimensions: 35.1mm (Max.), 100 ±1 (Length), 5 ±0.1 (Shaft Extension)
Shaft Diameter: Ø22 ±0.082
Nut and Label are indicated.
Motor Rear View (Mounting Flange):
(Drawing showing the mounting flange with bolt circle)
Bolt Circle: 3-Ø3.5 B.C.S.
Flange Diameter: Ø25.4
Lead Screw and Nut Detail:
(Drawing showing the lead screw with nut)
Dimensions: 19, 3.81
Shaft Diameter: Ø11
Radius: R0.5
Specifications
| No. | Specifications | ||
|---|---|---|---|
| 1 | 相数 Number Of Phase | ||
| 2 | 步长 Linear Travel/Step | 0.015 mm (1.8°) | |
| 3 | 额定电压 Rated Voltage | 2.4 V DC | |
| 4 | 额定电流 Rated Current | 1.5 Amp | |
| 5 | 额定推力 Rated Thrust | 57 N (@300rpm, rated current) | |
| 6 | 相电阻 Phase Resistance | 1.61 ohm±10%(20℃) | |
| 7 | 相电感 Phase Inductance | 2.5 mH±20% (1kHz 1V rms) | |
| 8 | 转子惯量 Rotor Inertia | 20 gcm^2 | |
| 9 | 重量 Weight | 0.21 Kg | |
| 10 | 绝缘等级 Insulation Class | B(130°C) | |
| 11 | 丝杠直径 Screw Diameter | 6.7 mm | |
| 12 | 丝杠导程 Lead | 3 mm |
Wiring Diagram and Excitation Sequence
Wiring Diagram:
(Diagram showing connections for terminals A, B, C, D)
Exciting Sequence vs. Direction of Rotation:
(Table showing STEP, A, B, C, D with + and - indicating excitation)
Clockwise view from mounting side
| STEP | A | B | C | D | CCW |
|---|---|---|---|---|---|
| 1 | - | + | - | + | |
| 2 | + | - | + | - | |
| 3 | - | + | - | + | |
| 4 | + | - | + | - |
Lead Wire Color Information
Connector Pin vs. Lead Wire Colour:
(Table mapping pin numbers to wire colors)
| Pin No. | 颜色 Colour | |
|---|---|---|
| 1 | 黑 BLA | |
| 5 | 绿 GRN | |
| 7 | 红 RED | |
| 11 | 蓝 BLU |
Connector Housing: JST ZHR-11
Terminal: SZH-002T-P0.5
Wire: AWG26 UL1061
Important Notes and Manufacturer Information
Note: It's normal phenomenon if there is a little dust fall off when using the lead screw and nut.
Safety Warning: Avoid disassembly without qualification. [!] Non-professional personnel should not disassemble the motor.
Tolerances:
Tolerance for linear and dimensions without individual tolerance indications: GB/T 1804-M eqv ISO 2768-1:M
Geometrical tolerance for features without individual tolerance indications: GB/T 1184-K eqv ISO 2768-2:K
Manufacturer: PBC MOONS
Address: No. 168, Jia Ming Road, Minhang District, Shanghai
Contact: (021)52634688
Motor Label: LEAD SCREW MOTOR LE143S-T6503-100-AR1-S-150 XXXXXXXX
Batch Number: 4611110029791
Model NO.: LE143S-T6503-100-AR1-S-150
Version: A0
Scale: 1:1
Part Name: Linear Stepper Motor
