User Guide for Sanjiao Electronic models including: Quve-231, Quve-231 Smart WiFi Power Strip, Smart WiFi Power Strip, WiFi Power Strip, Power Strip, Strip
Shenzhen Sanjiao Electronic Trade Co., Ltd QUVE 2BAMY-QUVE 2BAMYQUVE quve
SMART WIFI POWER STRIP USER GUIDE PARAMETER: Quve-231 100-240V AC 15A Connection way 1- WiFi 1 Master button 3. Select add device on Smart Life App 4.Select device "Power Strip(WiFi)" 5.Select a 2.4GHz network and input your password.Tap "Next" 6.The app will scan for device. Please wait for the device to add automatically. The process may take as long as 30 seconds. 7.After appearing"Added successfully"It means the connect is complete and your device will be listed in your App. 1.Plug in and power on. 2.Set up Press and hold the master button for about 10 seconds until the WiFi LED flashes rapidly. 8.Your WiFi power strip device is configured successfully.Press on the iron of button,turn them on/off. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.Corel PDF Engine Version 22.0.0.412