POCO X3 NFC User Guide

Welcome

Thank you for choosing POCO X3 NFC.

Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide

MIUI (for POCO)

POCO X3 NFC comes pre-installed with MIUI (for POCO), our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

SIM Card Tray

The SIM card tray supports the following configurations:

• Dual Nano-SIM cards
• One Nano-SIM card and one Micro SD card

Diagram Description: A visual representation of the SIM card tray slots. One configuration shows two Nano-SIM cards. Another configuration shows one Nano-SIM card and one Micro SD card.

About Dual SIM

• Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
• Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
• VoLTE is only supported by telecom operators in certain regions.
• System may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
• WARNING: Do not disassemble this device.

WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

Important Safety Information & Precautions

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

General Safety

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories compatible with your device.
• This device's operating temperature range is 0°C to 40°C. Using this device outside this range may damage it.
• If your device has a built-in battery, do not attempt to replace it yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, or damage.
• After charging, disconnect the adapter from the device and power outlet. Do not charge for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. If deformed or damaged, stop using it immediately.
• Do not short circuit the battery, as this may cause overheating, burns, or other injury.
• Do not place the battery in high-temperature environments; overheating may cause explosion.
• User shall not remove or alter the battery. Removal or repair must be done by an authorized repair center.
• Keep your device dry.
• Do not attempt to repair the device yourself. Contact customer support or an authorized repair center for issues.
• Connect other devices according to their manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and be easily accessible.

Environmental & Situational Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere (e.g., fueling areas, below decks on boats, fuel/chemical storage facilities, or areas with dust/metal powders). Obey signs to turn off wireless devices. Turn off your phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be turned off.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Comply with all hospital rules. If you have a medical device (e.g., pacemaker), consult your doctor and the manufacturer. Maintain a minimum distance of 15 cm between your phone and a pacemaker. Use the phone on the ear opposite your pacemaker and do not carry it in a breast pocket. Avoid use near hearing aids, cochlear implants, or other similar medical devices.
• Observe aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving, use your phone in accordance with traffic laws.
• To avoid lightning strikes, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms, as this may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone's operating system using the built-in software update feature, or visit an authorized service outlet. Updating software through other means may damage the device or result in data loss or security issues.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi M2007J20CG is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

The CE mark CE indicates compliance with EU directives.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands and was placed in positions simulating RF exposure against the head (no separation) and near the body (5 mm separation).

SAR compliance for body operation is based on a 5 mm separation distance. The device should be carried at least 5 mm away from the body. When attaching the device near the body, use a belt clip or holster without metallic components that maintains at least 5 mm separation. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.0 cm away from the body.

Certification Information (Highest SAR)

• SAR 10 g limit: 2.0 W/Kg
• SAR Value: Head: 0.558 W/Kg, Body: 0.986 W/Kg (5 mm distance)

Legal Information

This device may be operated in all EU member states. Observe national and local regulations.

This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

❗ Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Receiver Category 2: Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

• GSM 900: 35 dBm
• GSM 1800: 32 dBm
• UMTS band 1/8: 25 dBm
• LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 20 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5825 MHz: 14 dBm
• NFC: 13.56 MHz < -24.131 dBuA/m at 10m

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.0 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

E-label

This device has an electronic label for certification information. To access it, please go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Model: M2007J20CG

2007 indicates that this product will be launched after 202007.

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide).

All illustrations are for illustration purposes only and may not accurately depict the actual device.

This smartphone is designed with Corning® Gorilla® Glass 5.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: POCO

Model: M2007J20CG

© Xiaomi Inc. All rights reserved.