Step 1: Secure Trailer

Secure and chock the wheel of the trailer. Place the stand in the center of the stabilizing stand. [Diagram: Trailer wheel secured and chocked, stabilizing stand positioned centrally.]

Step 2: Adjust Height

Place light weight on the foot stand. Rotate the handle counter-clockwise ↶ to disengage the pin and allow the stand height to change. [Diagram: Hand applying light weight to foot stand. Handle rotated counter-clockwise to release pin for height adjustment.]

Step 3: Stabilize Trailer

Allow the stand to rise ⬆️ to the height of the trailer. Replace the pin in the nearest hole. The trailer is now stabilized. [Diagram: Stabilizing stand extending upwards. Pin being inserted into a hole to secure the height. Trailer is stabilized.]

Step 4: Remove Stand

To remove the stand, remove the pin and press down on the foot stand to lower the stand. Once the stand is lowered, replace the pin. Pull and roll the stand out of the way before moving the trailer. [Diagram: Stabilizing stand lowered. Pin removed. Stand rolled away from the trailer.]