Instructions for EZ-FLO models including: 2005-HB, 2020-HB, 1010-HB, 2005-HB Hose Bib Feed Chart Instructions, 2005-HB, Hose Bib Feed Chart Instructions, Feed Chart Instructions, Chart Instructions, Instructions
EZ 2005-HB No Flo-Disc / Standard Hose Bib Feed Rate Ratio Tank Capacity Gallons to Empty Slow 1000 to 1 .75 gal 1000 x .75 = 750 #1 500 to 1 .75 gal 500 x .75 = 375 #2 250 to 1 .75 gal 250 x .75 = 188 Fast 100 to 1 .75 gal 100 x .75 = 75 Feed Rate Slow #1 #2 Fast With Any Color Flo-Disc Ratio Tank Capacity Gallons to Empty 250 to 1 .75 gal 250 x .75 = 188 125 to 1 .75 gal 125 x .75 = 94 62.5 to 1 .75 gal 62.5 x .75 = 50 25 to 1 .75 gal 25 x .75 = 19 EZ 2020-HB No Flo-Disc / Standard Hose Bib Feed Rate Ratio Tank Capacity Gallons to Empty Slow 1000 to 1 2.5 gal 1000 x 2.5 = 2500 #1 500 to 1 2.5 gal 500 x 2.5 = 1250 #2 250 to 1 2.5 gal 250 x 2.5 = 625 Fast 100 to 1 2.5 gal 100 x 2.5 = 250 Feed Rate Slow #1 #2 Fast With Any Color Flo-Disc Ratio Tank Capacity Gallons to Empty 250 to 1 2.5 gal 250 x 2.5 = 625 125 to 1 2.5 gal 125 x 2.5 = 312 62.5 to 1 2.5 gal 62.5 x 2.5 = 156 25 to 1 2.5 gal 25 x 2.5 = 62.5 EZ 1010-HB No Flo-Disc / Standard Hose Bib Feed Rate Ratio Tank Capacity Gallons to Empty Slow 1000 to 1 .75 gal 1000 x .75 = 750 #1 500 to 1 .75 gal 500 x .75 = 375 #2 250 to 1 .75 gal 250 x .75 = 188 Fast 100 to 1 .75 gal 100 x .75 = 75 Feed Rate Slow #1 #2 Fast With Any Color Flo-Disc Ratio Tank Capacity Gallons to Empty 250 to 1 .75 gal 250 x .75 = 188 125 to 1 .75 gal 125 x .75 = 94 62.5 to 1 .75 gal 62.5 x .75 = 50 25 to 1 .75 gal 25 x .75 = 19 Notes: All feed rates are approximate and not guaranteed by EZ-FLO due to the high amount of variables resulting from differences in irrigation system configuration, product quality, viscosity, and specific gravity. Feed rates and ratios are provided for convenience only. EZ-FLO feeders should be used for general application of liquid and water soluble products only and are not marketed as a direct replacement for chemical siphon feeders. For safe fertilizing practices EZ-FLO recommends the plants be fed at half or 50% of the manufacturers recommended amount for the first application to prevent any damage to the plants or landscape. Garden Products Feeding Chart Example: EZ 1010-HB, Ferti-Maxx Triple 18, Fast Setting Product Label Step 1: Find Product Application Rate Per Gallon Hand Applications: Mix 1/2 Teaspoons per gallon of water.... Feeding Chart EZ 1010-HB No Flo-Disc / Standard Hose Bib Feed Rate Ratio Tank Capacity Gallons to Emptyy Slow 1000 to 1 .75 gal 1000 x .75 = 750 #1 500 to 1 .75 gal 500 x .75 = 375 #2 250 to 1 .75 gal 250 x .75 = 188 Fast 100 to 1 .75 gal 100 x .75 = 75 Feed Rate Slow #1 #2 Fast With Any Color Flo-Disc Ratio Tank Capacity Gallons to Emptyy 250 to 1 .75 gal 250 x .75 = 188 125 to 1 .75 gal 125 x .75 = 94 62.5 to 1 .75 gal 62.5 x .75 = 50 25 to 1 .75 gal 25 x .75 = 19 Step 2: Use the Feeding Chart to Find Gallons to Empty Fast 100 to 1 .75 gal 100 x .75 = 75 Step 3: Apply to the Formula Product Application Rate X Gallons to Empty = Product to put into the tank Hand Applications: Mix 1/2 Teaspoons per gallon of water.... Fast 100 to 1 1 gal 100x.75 = 75 1/2 Teaspoon per gallon X 75 Gallons = 33 Teaspoons in the tank 33Teaspoons of the product should be added to the tank to achieve 1/2 Teaspoon per gallon of injected product. Referencing the feeding chart with product labels will give you the correct amount to put in the tank. When the cap setting changes, the gallons to empty will change as well and you will want to recalculate the amount of product to put into the tank. EZ-FLO always recommends using 50% of the recommended dose of product to avoid over fertilization when first using the injection system. Traditionally, most manufacturers recommend a maximum dosage on their label, the plants will often thrive with significantly less fertilizer.Corel PDF Engine Version 22.1.1.523 CorelDRAW 2020