BOW HB357-3 Wireless Keyboard Instruction Manual

Product Overview

Thank you for choosing the BOW wireless keyboard. Please read this manual carefully before use.

Product Display:

A visual representation of the wireless keyboard is provided, showing its layout and design.

Model: HB357-3

Bluetooth Channel Pairing and Connection Steps

1. Step 1: Turn on the keyboard's power switch. The indicator light will stay on for 3 seconds and then turn off.
2. Step 2: Long press the Bluetooth channel 1 button (31). The pairing indicator will flash blue slowly, indicating it has entered pairing mode.
3. Step 3: Turn on the Bluetooth on your tablet or device and search for the keyboard. The keyboard name is 'B.O.W'. Click to connect.
4. Step 4: A successful connection will be indicated, and the keyboard status indicator will turn off.

Notes on Bluetooth Connection:

• The connection method for Bluetooth channels 2 and 3 is the same as for channel 1.
• Switch Channel: Simply click the corresponding Bluetooth channel button.
• Reconnect: Tap the corresponding Bluetooth channel button.
• If the keyboard is unpaired for 180 seconds, it will enter sleep mode. You will need to press the corresponding Bluetooth channel button again to pair.

Instructions for Use of Function Keys

The following table details the function keys and their corresponding actions on Android, iOS, and Windows operating systems.

Note: The multimedia function keys are activated by a single press by default. The F1-F12 keys are activated by single pressing when Fn lock is enabled.

Keyboard Parameters

Indicator Lights

Pairing Indicator Behavior: The channel indicator flashes green 5 times for approximately 1 second, then flashes for about 180 seconds. If pairing is successful, the indicator stays on for a long time. If pairing fails, it enters sleep mode.

Power Saving Sleep Mode

The keyboard automatically enters sleep mode after 30 minutes of inactivity. To wake it up, press any key and wait for approximately 4 seconds. The keyboard will then be ready for normal use.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.