FreedConn HERO Operation Guide

Welcome!

Thank you for choosing the FreedConn (路翼) HERO helmet Bluetooth communication intercom headset. By purchasing FreedConn products, you receive dedicated protection and hassle-free after-sales service. All products are manufactured to the highest standards of performance and safety, backed by a 2-year full warranty as part of our commitment to customer service and satisfaction. We hope your purchase provides many years of high-quality experience.

Safety Tips: Wearing a FreedConn helmet headset while riding reduces your ability to hear ambient sounds. Prolonged listening at maximum volume, combined with temporary adaptation, can impair hearing of soft sounds and may lead to permanent hearing damage.

Warm Reminder: For optimal sound quality, ensure the headset unit is within 2mm of your ear during installation. Please charge your HERO battery for at least 2 hours before first use.

Basic Functions Operation Guide

1. Switch on/off button/Intercom button:

• Switch On: Long press 2 seconds.
• Switch Off: Long press 3 seconds.
• Connect to Mobile Phone: Long press 8 seconds in power-off state.
• Pairing Information Resetting: Long press 8 seconds in power-on state.

2. Volume up/previous song button:

• Volume Up: Long press.
• Previous Song: Short press.

3. Multi-function button:

• Pause/Play Music: Short press.
• Answer Call: Short press.
• End Call: Short press.
• Reject Call: Long press 2 seconds.
• Voice Dial: Long press 2 seconds.

4. Volume down/next song button:

• Volume Down: Long press.
• Next Song: Short press.

2-6 People Group Conference Talking

Initiate Pairing: While devices are powered off, have one team member (A-F) long press any power button for 8 seconds to enter pairing mode.

The host will automatically announce the number: "1...6".

Start Talking:

• When team members are 5 or fewer, double-click the intercom button on the last host in the sequence to start group intercom.
• When there are 6 team members, group intercom starts directly.

Note: Delete all pairing information from devices before starting pairing.

Group Talking Disconnecting/Reconnecting:

• Short press the intercom button to disconnect from the previous and next devices.
• Short press the intercom button again to reconnect to the next device.
• Double-click the intercom button to reconnect to the previous device.

Connect to Two Mobile Phones

Pairing: In power-off state, long press the power button for 8 seconds to pair with one phone. Turn off the device and repeat the process with the second phone.

Music Playback: Music can only be played from the connected mobile phones via their respective music apps. Playback, pause, track selection, and volume control follow the instructions in the previous sections.

Answering Calls from Two Phones: If you are on a call with phone A and receive a call from phone B, short press the multi-function button to end the call with A, then short press again to answer the call from B.

Switch Between Manual/Automatic Answering: While in standby mode, simultaneously short press the power button and the next song button.

Music Sharing

Setup:

1. Follow the 2-6 people group talking pairing method to establish a two-person intercom state, then turn off both devices.
2. Connect both devices (A & B) to their respective mobile phones via Bluetooth and open music apps. Ensure both devices are in music paused state.

Note: Music sharing is supported only between two HERO devices.

Start Sharing: Double-click the intercom button on either device (A or B) to enter music sharing mode.

The sharing party presses the play button. The person who presses play becomes the sharing party.

Note: Only the sharing party can pause music by short pressing the multi-function button. The receiving party cannot perform this action, as it will exit music sharing.

Exit/Reconnect Sharing: Double-click the intercom button on either device (A or B) to exit or reconnect to music sharing.

Notes:

• When A shares music to B, pressing the intercom button on either device will not pause A's music. Both A and B can double-click the intercom button to reconnect.
• To change the sharing party: Both A and B must pause music, then the person who presses the play button becomes the new sharing party.

WeChat Voice Calls

WeChat voice calls can only be answered and hung up via the mobile phone.

Language Switching

While in standby mode, simultaneously short press the power button and the multi-function button.

Pairing with Third-Party Bluetooth Headsets

Initiate Pairing: While in standby mode, long press the multi-function button for 8 seconds.

Turn the third-party Bluetooth headset into pairing mode (follow its instruction manual).

Connect: Short press the HERO's intercom button to connect with the third-party headset.

Installation Steps

1. Attach the clip to the appropriate position on the left side of the helmet.
2. Insert the host into the clip's slot.
3. Stick the Velcro pads onto the inner side of the helmet near your ears.
4. Fix the speakers onto the Velcro pads.
5. Plug the headset's USB jack into the USB port on the Bluetooth host.

Part List

• Bluetooth host x1
• Fix base x2
• Microphone & speaker x1
• Velcro pad x4
• Soft micro Velcro pad x2
• USB-C cable x1
• User Manual x1

Product Parameters

• Bluetooth version: 5.1
• Frequency: 2.4 GHz
• Weight: 48g
• Host size: 90mm x 48mm x 21mm
• Charging adapter: DC 5V 1A
• Battery capacity: 1100mAh
• Battery type: Rechargeable polymer lithium battery
• Battery material: Ternary lithium material
• Battery model: 802060
• Voltage: 3.7V
• Power: 4.07Wh
• Intercom time: 30 hours
• Music time: Approx. 26 hours
• Charging time: Approx. 2 hours
• Standby time: Auto power off after 15 minutes of inactivity and no connection.

After-sales Technical Support

Please scan the QR code for support.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.