REXING R316 Dash Camera User Manual

User Manual for REXING models including: R316 Dash Camera, R316 Dash Camera, Camera

R316 Original Size

User Manual

REXING INC. R316 Dash Camera 2AW5W-R316 2AW5WR316 r316

REXING INC. R316 2AW5W-R316 2AW5WR316 r316

File Info : application/pdf, 22 Pages, 4.51MB

GetApplicationAttachment.html?id=7207571

R316
User Manual
The information in this manual is subject to change without notice. wwww.wrewxi.nregxuinsgau.csao.mcom
REV012024

Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
care@rexingusa.com (877) 740-8004 Our support team will respond to you as soon as possible. Always a surprise with Rexing
Check us out here.
· https://www.facebook.com/rexingusa/ · https://www.instagram.com/rexingdashcam/ · https://www.rexingusa.com/support/registration/

Facebook

Instagram

Site

Product Support

Activate Your
18-Month Warranty
& Choose Your
Free Gift!
Activate within 30 days of purchase to claim your free gift and extended limited 12-month warranty to 18 months.

Scan the QR to Activate & Select Your Free Gift

SCAN
ME!

https://www.rexingusa.com/productreg/ 12

What's in the box?

R316 User Manual
The information in this manual is subject to change without notice. wwww.wrewxi.nregxuinsgau.csao.mcom
REV012024
7

1. Rexing R316 Dash Cam 2. 64GB Micro SD Card 3. Car Power Connector (12ft) 4. Suction cup mount with GPS module

5. Cable Management Kit 6. Smart Hardwire Kit 7. User Manual

Camera Overview

68
1. Power Button / Screen Toggle Button 2. Menu Button / Mode Button 3. Up Navigation Button / Wi-Fi on/off /
Emergency Lock Button(Hold) 4. Down Navigation Button
/Microphone on/off(Hold) 5. OK (Confirm) Button / Record Button
4

6. USB-C Charging Port 7. Micro SD Card Slot 8. Rear Camera Port 9. Cabin-facing camera

Screen Icons

Wi-Fi (OFF)

Recording Time (Current Clip)

Loop Recording (ON)

Recording (ON)

Video Resolution

WDR (ON)

MIC (ON)

Memory Card Inserted
Power Connected

00:06 2,5K+1080+1080

02/05/2024 07:02:55 PM

Current Date (MM/DD/YYYY)

Current Time

Parking Mode (OFF)

Installation
Step 1 Install the Dash Cam
Place the suction cup mount and properly orient the mount and lock the suction cup. On the illustration orient the mount as shown.
Orient the mount as shown
6

Step 2 Insert the Memory Card
The Rexing R316 accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording. Before inserting or removing a memory card, first ensure you've powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
7

Step 3

Power on the Camera and Format the Memory Card

Power on the camera by connecting the charger to the car cigarette lighter and camera. To ensure the R316 records to your memory card properly and without error. Before you start using a new memory card, you must format the card within the camera using the format function. Always backup important data stored on the memory card before formatting.

To format the memory card, make sure you have inserted your memory

card, then turn on the device by connecting to a power source. Press OK

to stop recording. Then press the MENU button twice to enter the System

Setup Menu. Use the and

buttons and toggle to the Format

setting. Press the OK button to confirm the selection.

You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on.

System Settings

Light Frequency WDR

In-car mirror Back road mirror

Format Screen Saver Language Parking Monitor

Step 4 Mount the Rear Camera(Optional)
Mount the rear camera as shown below. Use rear camera cable to connect the rear camera to the R316 camera.
front cabin
rear
9

Step 5
Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windshield and tuck in under the trim.
Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter.
Connect car charger to the camera. The camera will auto-start recording once powered on.

Route power cable to the Dashcam

Plug USB-C Connector to the Dashcam

Plug charger into power outlet or cigarette lighter

Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and received a charge (i.e.: the vehicle is started). To turn the device on manually, press and hold the Power button until the welcome screen appears. The camera will automatically start recording when power on.
Press and hold the Power button to turn the device on manually
Menu Settings
Power the camera On. If the camera is recording, press the OK button to stop recording. Press the MENU button once to enter the settings menu.
11

Video Recording
The camera will automatically start recording when the device receives charge. The LED lights and red dot will blink device when recording. Press the OK button to stop recording.

The camera automatically starts recording when powered on

Locked Video

To use the Emergency Record Mode, hold the manually lock the current video clip.

button to

View locked recordings by pressing the menu/playback button.

Video Playback

Playback of videos can be done on the device or a computer. To playback

a video on the device hold M button to toggle to the Playback mode. Use

the and

buttons to toggle to the desired video. Press the OK

button to play.

During playback use the OK (pause), (rewind) and buttons to control the video playback.

(fast forward)

To playback a video on the computer, either use an SD card adapter or connect the device to the computer directly using the USB cable.
To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.

Wi-Fi Connect
Step 1 With your dash cam powered on, hold the UP navigation button to enable the Wi-Fi function. The Wi-Fi name (aka the SSID) and password for the dash cam should be displayed on-screen.

Wi-Fi
Wi-Fi Not Connected SSID: B50D_bb92 Password: 12345678

Step 2
On your mobile device, navigate to your Wi-Fi settings. Connect to your dash cam's Wi-Fi by tapping its name when it appears. Enter your dash cam's Wi-Fi password if you are prompted to do so.
Note: On same mobile devices, you may have to try to connect more than once. To ensure you've successfully connected, your mobile device's screen should resemble the examples shown.

Samsung / Android Example

iPhone / iOS Example

Step 3 Once you're connected to the dash cam, open the Rexing Connect app on your mobile device.
Please select "Keep Trying Wi-Fi" if you see the notification on the right.

Step 4 In the app, hit the "Connect" button to connect to your dash cam, allowing you to access live view and view/download your recordings. Note: Press to the UP button to disconnect the Wi-Fi.
14

Rexing Connect App
Easily download the app by scanning the QR code below or search via the App Store or Google Play.
Wi-Fi Connect Troubleshooting
If you bring up the Rexing connect app and cannot connect your phone to the dash cam please go to https://www.rexingusa.com/wifi-connect/ OR scan the QR code below.
15

GPS Logger
You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com).
The dash cam will automatically search for the GPS signal once it's connected to the power source. Press the MENU button and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit.
After a GPS signal is found, the screen icon will turn from disconnected to connected as per the below icons. It will record the speed and location of your vehicle as you drive.

GPS Signal (not found)

GPS Function Active

GPS Date-Time Troubleshooting
If your dash cam GPS date and time are incorrect please go to https://www.rexingusa.com/gps-date-time/ OR scan the QR code below.

Parking Monitor (Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged.
Option 1: Vibration Detection To enable the Parking Monitor, you'll need to connect it with a Smart Hardwire Kit.
Switched Fuse Hot Fuse Ground
This feature will allow the dash cam to switch to parking mode automatically if the vehicle's engine turns off and switch back to the normal recording after the vehicle's engine turns on.
Gravity Sensing Record: The Gravity Sensing detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting the "Gravity Sensing" to High sensitivity for Parking Mode Recording.
17

Note: If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and the video cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally. Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction. Option 2: Motion Detection To use this feature, you need to connect it with a Rexing Intelligent Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction. Once the sensor has detected MOTIONS. The intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared. Please go to https://www.rexingusa.com/hwk-install/ to watch a video tutorial about the installation or scan the QR code below.
18

Warranty & Support
Warranty
The Rexing R316 Dash Cam comes with a limited 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the limited warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
19

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FCCID: 2AW5W-R316
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

References

Adobe Illustrator(R) 24.0 Adobe PDF library 17.00