User Manual for WOLFBOX models including: V01-1 Upgraded Version Portable Refrigerator, V01-1, Upgraded Version Portable Refrigerator, Version Portable Refrigerator, Portable Refrigerator, Refrigerator
Amazon.com: WOLFBOX Upgraded Version 12V Portable Refrigerator, 26 Quart Car Fridge, RV Car Refrigerator with 12/24V DC 100/240V AC, Electric Cooler for Car, Camping, Travel and Home Use, APP Control : Automotive
V01-1 User Manual Warranty and service Wolfbox offers a warranty on this product Scope of application of the warranty: 1. The product is operated strictly in accordance with the specified use. 2. The product is used in accordance with the instructions for use. 3. Present the original product invoice. 4. Wolfbox warranty does not apply to damage caused by accident, error or misuse of the product. For more information and know more, or if you have questions about the product, please contact customer service. support@wolfbox.com Or call our customer service hotline: +1 888 296 8399 1. Important matters After unpacking, please make sure to place it squarely and leave it for more than 24 hours before powering it on. 1.1 When the refrigerator is running, try to ensure that it is placed horizontally. Running more than 2 hours, the tilt angle should be less than 5 °; running within 2 minutes, the tilt angle should be less than 40 °. 1.2 The refrigerator needs to ensure good ventilation during normal operation, and needs to leave a certain space around to facilitate heat dissipation. 1.3 Pay attention to the safety of electricity during use to avoid unnecessary hazards. 1.4 This product should be used to avoid high temperature, humidity, sun exposure and rain, and other environments. 3 1.5 This product should not be disassembled, hit or put into fire. It contains cyclopentane, please store it properly to avoid fire. 1.6 Children under 8 years old are not allowed to handle this product alone. 1.7 Do not store explosives, accelerants and other flammable and explosive items in the refrigerator. 1.8 Please do not fill the container with ice or other liquids to avoid damage. 1.9 Please use the original parts of our company to avoid damage. 1.10 Please do not repair or handle the product by yourself to avoid damage. 1.11 Please make sure the cooling capacity of this product is in accordance with the items you need to store. 1.12 Disposal of used refrigerators should be in accordance with relevant laws and regulations and policies, do not disassemble or discard without permission to avoid harm. 1.13 In case of emergency, please unplug the power as soon as possible! Note: For more help or support, please contact customer service. Important: Please observe the relevant national laws and regulations and do not use this product for any illegal purpose, otherwise you will be responsible for the consequences. 4 2. Product Introduction 4 1 2 3 1 Control panel 2 Handle 3 Power interface 4 Cover handle Accessories: Car charger cable AC to DC converter 5 Specification Model Connection Voltage Related current Cooling capacity Volume Refrigerant Weight Power Consumption Insulation Cooling System Ambient Temperature W-18 DC 12V/24V W-25 4.6A/12V 2.3A/24V -8°F ~ 68°F (-22°C ~ 20°C) 19qt 26qt 28g 32g 55W Polyurethane Compressor +14°F to +109°F / -10°C to +43°C 6 3. Operation guide 3.1 Schematic diagram of the control panel Working mode Child lock Temperature unit, battery protection mode, Bluetooth Battery level USB interface Temperature adjustment Chamber Voltage temperature Setting Power ON/OFF Single control version For 19qt and 26qt 3.2 Locking and unlocking Lock: After 10 seconds of no operation, the control panel will be locked automatically. Unlock: press and hold the "up" and "set" key at the same time, the refrigerator unlocked Important 1. The following operations can only be performed when the power is turned on and unlocked 2. After completing the settings, wait for the page to stop flashing to save the settings 3.3 Switch on/off Power on: long press the "ON/OFF" key Power off: Press and hold the "ON/OFF" key 7 3.4 Temperature setting 1. Single zone temperature setting: Press "Up" and "Down" to change the temperature. Note:When the temperature setting is complete, the panel displays the current temperature inside the refrigerator instead of the set value. 3.5 Battery protection settings 1. Short press "Set" to select the setting object 2. When the voltage protection area is flashing, set the battery protection level by "up" and "down". Monitor Level Switch-off voltage 12V Restart voltage Switch-off voltage 24V Restart voltage Low 8.5V 10.9V 21.3V 22.7V Medium 10.4V 11.7V 22.8V 24.2V High 11.1V 12.4V 24.3V 25.7V Note: The voltage values are theoretical and may have some deviation. Description: 1. Voltage protection has three levels "L" "M" "H", the default setting is "M" gear. 2. When the device is connected to the vehicle DC power supply, this function can protect the vehicle battery from excessive discharge. 3. If the device is running without the vehicle ignition, the device will automatically shut down when the voltage drops below the set level. 8 3.6 Temperature unit setting 1. Short press "Set" to select the setting object. 2. When the temperature unit area is flashing, adjust it by "up" and "down". When the blinking stops, the setting is successful. 3.7 Working mode setting 1. Short press "Set" to select the setting object. 2. When the working mode area is blinking, it is adjusted by "up" and "down". When the blinking stops, the setting is successful. Note: Energy saving mode "ECO" can reduce the power of refrigerator to save energy. 9 4. Frequently Asked Questions 4.1 Running error codes Error Code E0 E1 E2 E3 E4 E5 Possible Reason Sensor circuit is broken or short Input voltage is low Ventilating fan problem Compressor started self-protection Compressor protect itself against unusual running speed. Control panel's overheating warning Suggested Solution Connect or replace the sensor Check the battery voltage or adjust the Battery Monitor Level. Check if the ventilating fan is blocked or short circuit. Disconnect the device from power supply for 30 minutes, and re-start the device. Change the working mode by device control panel Move the device to a place with well-ventilated installation environment. 4.2 Simple Troubleshooting 1. Refrigerator does not work 1 Check whether the refrigerator is on 2 Check whether the power cord plug and socket link is loose 3 Check whether the electric input power is connected correctly (Check the voltage, positive and negative, voltage protection, etc.) 4 Check whether the fuse is blown or off 10 2. Poor refrigeration 1 refrigerator door is good, whether the seal is damaged deformation. 2 whether the box or ambient temperature is too high, whether by direct sunlight or near a heat source. 3 and to the surrounding whether to keep more than 100mm space, to ensure heat dissipation. 4 long time use lead to refrigerator inner wall frost layer too thick Shell produce water beads: air moisture contact low temperature shell surface, natural liquefaction condensation, is a normal phenomenon. 5. After-sales service If the product is defective, please feel free to contact us and we will help you resolve any issues. For repair and warranty processing, please include the following documents when sending your equipment. A specific description of why the product failed or what the failure was. If you encounter problems that cannot be solved, you can ask for help from our after-sales staff or customer service personnel: Tel: +18882968399 Email: service@wolfbox.com Business time: 6am-12am,1pm-8pm EST(GMT -4) 11 Check us out here! We have professional customer service! E-mail: service@wolfbox.com Phone: +1 888 296 8399Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)