Q30T Smartwatch User Guide

01 Product Introduction

Functional key: Functional key

Display screen: Display screen

Shortcut key: Shortcut key

Sensor: Sensor

Charging port: Charging port

Please read this operation guide carefully before using the watch and keep it properly.

Note: Illustrations in this manual are for reference only. Due to product updates and enhancements, actual products may vary slightly from the illustrations.

02 Wearing

Wear your watch one finger from the wrist bone and adjust the strap tightness to ensure the heart rate sensor collects data properly.

Note: Wearing the watch too loosely may affect the accuracy of heart rate monitoring data.

03 Connection

Scan QR code or search "GloryFit" in AppStore (iOS) or Google Play (Android) to download and install the app.

Users can set personal information on the mobile phone.

Switch to the "Device" screen and click to bind the device.

Click your device on the scanning list.

Bind successfully.

WeChat scan

QR code on the watch

04 Usage

Screen operation

1. Enable shortcut menu.
2. Enable message notifications.
3. Switch functional card.
4. Enter functional menu.
5. Return to the last level.
6. Select other watch face setting.

06 Recharging

The watch uses magnetic charging. Please match the charging pins of the charging cable to the watch's charging port until the watch screen shows the recharging reminder.

1. When charging, the watch screen will be off. Users can click the button to wake up the screen. If the watch power is too low, it may take 3 to 5 minutes to charge before waking up the watch. This is normal. Please wait for 5 minutes and then check the watch charging status.
2. Please use the exclusive charging cable for charging. The charging is unidirectional. Pay attention to the charging direction; correct charging will attract, while incorrect direction will repel. Do not force charging.
3. Please connect the charging socket to a power adapter (5V/0.5A) or PC with a USB cable. Please recharge the watch when the power is low.

07 Strap adjustment and disassembly

Strap adjustment

Adjust the watch buckle according to your wrist to ensure the strap and watch cling to your wrist.

Strap disassembly and assembly

1. Pull the buckle of the strap and lift the strap to remove it.
2. Insert one side of the strap into the lugs, pull the buckle of the strap, align the other side with the lugs and release the buckle. The strap is fitted with a click.
3. Pull and tug the strap to ensure it is well-installed.

Disassemble the strap

Assemble the strap

Product Information

Product name: Smartwatch

Product model: Q30T

Manufacturer: Shenzhen Ultra Easy Intelligence Co., Ltd.

Address: 6E, Block D, Central Avenue, Intersection of Xixiang Avenue and Baoyuan Road, Labor Community, Xixiang Street, Baoan District, Shenzhen

Wireless connection: Bluetooth BLE 5.2

User Guide version no.: V1.0

The watch supports Bluetooth calling, daily exercise monitoring, sports mode monitoring, healthy management data monitoring, offline payment, and notification reminders.

The watch can be connected to a mobile phone via Bluetooth. Users can answer, reject calls, and check call logs and contacts on the watch.

Bluetooth calling function

Daily exercise monitoring function

Sports mode monitoring function

The watch supports multi-functional sports modes and data recording. More than 20 workout modes are supported, including outdoor running, outdoor cycling, skipping, badminton, table tennis, tennis, mountaineering, walking, basketball, football, baseball, volleyball, cricket, rugby, hockey, dancing, spinning, yoga, sit-ups, indoor running, gymnastics, rowing, jumping jack, and free training.

Wear the watch on your wrist to monitor and record daily steps, distance, and calories.

08 Core function

Healthy management monitoring function

The watch supports healthy data monitoring and display, such as heart rate, blood oxygen, and sleep. (The provided health data is for reference only and should not be used for medical diagnosis.)

Supports functions like messages, weather, music, low power reminders, alarm clock, incoming call reminders, find my phone, sedentary reminders, wrist awake, 12/24 hour system, flashlight, stopwatch, timer, calculator, etc. (Actual product features may vary due to model differences.)

Other functions

09 Precautions

1. Protect the watch from strong impacts, extreme heat, and exposure to the sun.
2. Do not disassemble, repair, or modify the watch yourself.
3. Use the watch in an environment of 0°C to 45°C. Do not throw it into fire to avoid explosion.
4. If the watch gets wet, dry it with a soft cloth before charging. Otherwise, it may corrode the charging pins and lead to charging failure.
5. Do not expose to chemicals such as petrol, cleaning solvents, propanol, alcohol, or insect repellents.
6. Do not use this product in high voltage, high magnetic environments.
7. Dry your wrist timely. Prolonged exposure of the strap to soap, sweat, allergens, or polluting ingredients may cause skin irritation and itching.
8. If worn regularly, it is recommended to clean the watch weekly by wiping it with a damp cloth and using a mild soap to get rid of any oil or dirt. It can be worn when washing your face and hands, but is not recommended when bathing or swimming.
9. Please use the charging cable supplied with the unit and a certified power adapter for charging.

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or a licensed radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in a portable exposure condition without restrictions.

10 Basic parameters

Bluetooth: Bluetooth 5.2

Compatible system: Android 5.0+IOS 8.0

Packing list: watch, charging cable, and user guide

Master control chip: Realtek 8763EWE

Display screen size: 1.39" TFT

Standby time: 5-15 days

Resolution: 360*360

Watch size: 46.7*54.2*11.4mm

Strap material: silicon

Product Information

Product name: Smartwatch

Product model: Q30T

Battery capacity: 300mAh

Product weight: about 38g

11 Warranty Notice

The after-sales service of this product is strictly in accordance with the Law of People's Republic of China on Protection of Rights and Interests of Consumers and the Law of the People's Republic of China on Product Quality and it provides three-guarantee service as follows:

Warranty Period

1. Within 7 days from the day after you sign for the product, the consumer has the option of returning, replacing, or repairing the product in the event of a non-human performance failure.
2. Within 8 to 15 days from the day after you sign for the product, the consumer has the option of replacing or repairing in the event of a non-human performance failure.
3. Within 12 months from the day after you sign for the product, the consumer has the option of free warranty in the event of a non-human performance failure.

Non-warranty regulation

1. Unauthorized maintenance, misuse, collision, negligence, fluid penetration, accident, modification, incorrect use of non-product accessories, or torn or altered labels and anti-counterfeit markings;
2. Exceeded the expiry date of the three-guarantee service;
3. Damages caused by force majeure;
4. Does not meet the failures listed in the Product Performance Failure List;
5. Performance failures of the product and its accessories listed in the Product Performance Failure List due to human causes.

Product Performance Failure List

Name

Performance failure

Watch body

Abnormality of display screen

Vibration failure

Operation failure of display screen

Failed to sync the designated device

Can not boot

Charging cable

Failed to charge the watch

Customer Information

1. User information
2. Product data
3. Maintenance record

E-mail:

Name:

Tel.:

Contact address:

Postal code:

Device SN number:

Date of acceptance

Failure phenomenon

Solution

Signature of repairer

12 Three-guarantee certificate