Pyronix SMOKE-WE (2nd Generation)
Fire safety made easy
Product Overview
A visual representation of the SMOKE-WE (2nd Generation) smoke detector installed in a home hallway. The detector is white and circular, mounted on the ceiling. Windows show an outdoor scene, and a doorway leads to a bedroom.
Where there's a SMOKE-WE (2nd Generation) there's fire detection. Extending the capabilities beyond security, the SMOKE-WE (2nd Generation) raises the alarm to the presence of smoke to protect families and homes. An easy upsell that increases the longevity and value of Pyronix systems, with voice push notification capabilities via the app to alert the user of danger.
Visit www.pyronix.com for more information.
Key Features
Optical detection for optimum performance
The SMOKE-WE (2nd Generation) uses a photoelectric sensor alongside a light source and optical chamber for accurate detection. As smoke enters the optical chamber, it crosses the path of the pulsing LED light source, scattering smoke particles towards the light receptor/sensor to trigger the alarm.
Loud and obvious alarms
The SMOKE-WE (2nd Generation) has a built-in 85dB local sounder and flashing LED lights, providing a clear and obvious alarm when smoke is detected.
Full low-battery supervision
When the battery is running low on the radio module of the SMOKE-WE (2nd Generation), the detector will send a signal to the control panel to report the issue. If the user has the smart device app connected to the system, they will also receive a push notification to draw their attention to the fault.
Manual test and silence
With a simple press of a button, it's easy to verify the battery status to ensure the SMOKE-WE (2nd Generation) is still alarm operational. This button can also be pressed to silence the alarm from the detector. Labels on the device indicate: [do-not-paint] [nicht-überstreichen] [silence-button] [test-button].
Technical Specifications
| Specification | Details |
|---|---|
| Partcode | SMOKE-WE |
| Smoke sensor | Smoke only |
| Dimensions (ø x D) | 120 x 52.45mm |
| Weight (including battery) | 183g |
| Detection | Photoelectric |
| RF power supply | 1 x 3V, CR123A (replaceable) |
| RF battery life | 2 years |
| Sensor power supply | 2 x 1.5V, AA (non-replaceable) |
| Sensor battery life | 10 years |
| Sensor low voltage alert | 2.6-2.7VDC |
| RF low voltage alert | 2.5V +/-5% @ 25°C |
| Sensor standby | alarm current | 25µA | 120mA |
| Sound level | 85dB/3m |
| Visual indications | Power, fault, and alarm |
| Transmission frequency | 868MHz FM transceiver narrow band |
| Transmission method and range | Fully encrypted rolling code, 300m |
| Operating temperature | -10°C - 50°C |
| Humidity | 5-90% |
| Sensitivity range | 0.105~0.165dB/m |
| Standards | EN 14604 |
| Certifications | EN14604 |
| Electrical conformity | CE |
| Environmental class | II |
A technical diagram shows the circular smoke detector with its dimensions indicated as 120mm in diameter and 52.45mm in depth.
Benefits of Two-Way Wireless Technology
No wires, no fuss
Fully wireless means there is no need to run wiring by lifting floorboards or moving furniture; saving time and money.
One-Push-To-Learn
A feature in all Enforcer wireless devices that means learning them onto the system can be done in seconds. A simple one-button learning feature for easy installation. Once in commissioning mode, the external test button of the SMOKE-WE (2nd Generation) becomes the one-push to learn button, making installation quick and simple.
Signal Strength Indicators (SSI)
SSI in all Enforcer wireless devices allow them to be optimally positioned during installation, without the need to refer back to the panel.
