Instruction Manual for TOOLCRAFT models including: TO-9090711, 3030237 LED Magnifier Lamp, 3030237, LED Magnifier Lamp, Magnifier Lamp, Lamp

3030237 v1 0524 hs en

TOOLCRAFT TO-9090711 Lampe loupe LED Grossissement: 2.25 x CEE: F (A - G) – Conrad Electronic Suisse

Buy TOOLCRAFT TO-9090711 LED illuminated magnifier Magnification: 2.25 x EEC: F (A - G) | Conrad Electronic

Lupa stona velika sa UV osvetljenjem TOOLCRAFT 5D, sočivo 189x156mm.

Lupa stona velika sa UV osvetljenjem TOOLCRAFT 5D, sočivo 189x156mm - Elektroleum

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 1.08MB

Dismantling Instructions LED (6500 K + UV) Magnifier Lamp
Item no: 3030237
1 Dismantling recommendations  Disconnect from power supply.  Ask help from a professional if needed.
2 Dismantling instructions Step 1 Product overview.

Step 2
Use the screwdriver to remove the screws from the metal connector. Take out the knob, use the soldering to desolder the wire and separate the light source with the arm.
Pull out the lamp cover.

Step 3 Pull out the wire from the arm and desolder the PCB in the lamp head.

Step 4 Test the light source.
1

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*3030237_V1_0524_hs_en 1396633099 I1/O1 en



References

• Conrad Electronic » All parts of success